Beijing Silk Road Enterprise Management Services Co., Ltd.
| Lifetime | 3000hrs@105℃ |
| Operating Temperature | -25℃~+105℃ |
| Capacitance | 470uF |
| Height - Seated (Max) | 40mm |
| Pin Spacing | 10mm |
| Voltage Rating | 200V |
| Diameter | 22mm |
| Tolerance | ±20% |
| Description | 470uF ±20% 200V Aluminum Electrolytic Capacitors Through Hole,D22xL40mm 3000hrs@105℃ |
| Mfr. Part # | KS200M471SI222*40TA-1B3Et |
| Package | Through Hole,D22xL40mm |
| Model Number | KS200M471SI222*40TA-1B3Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Lifetime | 3000hrs@105℃ | Operating Temperature | -25℃~+105℃ |
| Capacitance | 470uF | Height - Seated (Max) | 40mm |
| Pin Spacing | 10mm | Voltage Rating | 200V |
| Diameter | 22mm | Tolerance | ±20% |
| Description | 470uF ±20% 200V Aluminum Electrolytic Capacitors Through Hole,D22xL40mm 3000hrs@105℃ | Mfr. Part # | KS200M471SI222*40TA-1B3Et |
| Package | Through Hole,D22xL40mm | Model Number | KS200M471SI222*40TA-1B3Et |
This specification sheet details the Beryl KS Series snap-in aluminum electrolytic capacitors, designed for use in electronic equipment and meeting IEC 60384 standards. These capacitors offer a capacitance of 470uF at a rated voltage of 200V, with a compact size of 22*40mm. They are engineered for reliability with a rated life of 3000 hours at 105 and a wide operating temperature range of -25 to +105. The KS series is suitable for applications requiring stable performance and durability.
| Series | Cap (uF) | Capacitance Tolerance | WV (V) | Size (mm) D x L | Temperature () | Life (hours) @105 | DF (%) (MAX) 120Hz/20 | LC (A) (MAX) 5min/20 | ESR () (MAX) 100KHz/25 | RC (A rms) (MAX) 105/120Hz | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KS | 470 | 20% | 200 | 22 x 40 | -25~ +105 | 3000 | 15 | 920 | - | 1.54 | 230 |
| Type | D | L | S | Vent |
|---|---|---|---|---|
| ( 22~ 35) | 22+1max. | 402.5 | 6.00.5 | Yes |
KS 200 M 471 SI2 22*40 TA-1B3 E t
Capacitors are marked with:
| Component | Material | Supplier Examples |
|---|---|---|
| Terminal | Copper, tin | ZXH, XH |
| Seal | Bakelite, phenolic, etc. | ZXH, TY, XH, QK |
| Washer | Aluminum, 99.9% | ZXH, TY, XH |
| Tab | Aluminum, 99.9% | JY |
| Sleeve | PET | YL, DS |
| Case | Aluminum, 99.8% | OX, YJ, LY2 |
| Element | Aluminum foils, separator, electrolyte, etc. | - |
| - Anode foil | Formed aluminum, 99.99% or 99.98% | HX1, GD, FC, ZH, HF |
| - Cathode foil | Etched aluminum, 99.7% or 99.4% | GY, FL, TL |
| - Separator | Fiber paper | KE, CY, NKK, JLT |
| - Electrolyte | Ethylene glycol, Ammonium salt, etc. | XZB, JZ2 |
| Gasket | PVC/PP/PET | ZXH, XH |
| Adhesive tape | Propylene, butyl acrylate | RK, CW |
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| 1. Nominal Capacitance | Capacitance within specified tolerance | 120Hz12Hz, Series equivalent circuit, 0.5Vrms +1.5~2.0V.DC, 202 | Shall be within the specified capacitance tolerance. |
| 2. Leakage Current | 3CV (A) | 1k10 series resistor, 5 minutes | 3CV (A) |
| 3. Dissipation Factor | Within specified parameters | Nominal capacitance, specified frequency, voltage, and temperature | Must be within the parameters (See page 3) |
| 4. Impedance | Within specified parameters | 100kHz, 202, 2mm max. from sealing rubber | (20) Must be within the parameters (See page 3) |
| 5. Load Life Test | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. | IEC60384-4 No. 4.13, Max operating temp 2, Rated life +48/0 hours, DC bias + ripple current rated voltage, 16 hours recovery | Meets criteria. |
| 6. Shelf Life Test | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than 150% of specified value. Appearance: No electrolyte leakage. | No voltage applied, Max operating temp 2, 1000+48/0 hours, 16 hours stabilization | Meets criteria. |
| 7. Maximum Permissible Ripple Current | Maximum A.C current at 120Hz and max operating temp. | See Table-3 for frequency multipliers. Combined DC and peak AC voltage rated voltage. | - |
| 8. Terminal Strength | No noticeable changes, breakage, or looseness. | Tensile and bending tests as per specification. | Meets criteria. |
| 9. Temperature Characteristics | At +105: Capacitance 25% of +20 value, DF within Item 7.3 limits, Leakage current 10x specified value. Step 5: Capacitance 10% of +20 value, DF within Item 7.3 limits, Leakage current specified value. At -25: Impedance (Z) ratio as per table. | Step testing at -25, +20, +105. Capacitance, DF, Impedance measured at 120Hz. | Meets criteria. |
| 10. Surge Test | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | Surge voltage applied with (100 50)/CR (k) resistor in series, 305 sec, every 50.5 min, 1000 cycles. 1-2 hours recovery. | Meets criteria. |
| 11. Change of Temperature Test | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | IEC60384-4 No.4.7, 5 cycles of temp. cycle (+20, -25, +105) | Meets criteria. |
| 12. Damp Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. | IEC60384-4 No.4.12, 90~95% RH, 402, 5008 hours | Meets criteria. |
| 13. Solderability Test | Soldering wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. | 245 5, 2mm depth, 252.5mm/s, 30.5s | Meets criteria. |
| 14. Vibration Test | Inner construction: No intermittent contacts, open/short circuit. Appearance: No mechanical damage, no electrolyte leakage/swelling, legible markings. | 10Hz ~ 55Hz, 1.5mm peak amplitude, 2 hours per direction. Mounting with bracket if required. | Meets criteria. |
| 15. Resistance to Solder Heat Test | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. | 2605 for 101s OR 40010 for 3+1-0s, 1.5~2.0 mm from body. 1-2 hours recovery. | Meets criteria. |
| 16. Vent Test | Vent operates with no dangerous conditions (flames, dispersion). | DC test with reversed polarity and selected current (Table 2). For diameter 6.3. | Meets criteria. |
| Product Size | Case/box | PCS/box |
|---|---|---|
| 22 | 84 | 840 |
| 25 | 84 | 840 |
| 30*20~45 | 45 | 450 |
| 35*20~45 | 45 | 450 |
| 30*50~90 | 45 | 270 |
| 35*50~90 | 45 | 270 |
Packing Label Marked: Clint order number, Client part number, Beryl part number, Capacitance, Voltage, Dimension, Packaging quantity, Capacitance tolerance, QC Marking, Lot number, Series.
Bulk Packing: Inner case packaging requirement: Horns facing up, place a layer of tin foil or negative foil after filling each inner case, and add a cushioning board for discharge.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!