Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Capacitance | 330uF |
| Height - Seated (Max) | 16mm |
| Voltage Rating | 50V |
| Diameter | 10mm |
| Tolerance | ±20% |
| Description | 330uF 50V Aluminum Electrolytic Capacitors Through Hole,D10xL16mm |
| Mfr. Part # | RC050M331LO10*16TH-2A1Et |
| Package | Through Hole,D10xL16mm |
| Model Number | RC050M331LO10*16TH-2A1Et |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Capacitance | 330uF |
| Height - Seated (Max) | 16mm | Voltage Rating | 50V |
| Diameter | 10mm | Tolerance | ±20% |
| Description | 330uF 50V Aluminum Electrolytic Capacitors Through Hole,D10xL16mm | Mfr. Part # | RC050M331LO10*16TH-2A1Et |
| Package | Through Hole,D10xL16mm | Model Number | RC050M331LO10*16TH-2A1Et |
The BERYL RC Series Aluminum Electrolytic Capacitors (foil type) are designed for use in electronic equipment. These capacitors meet IEC 60384 standards and are suitable for applications requiring reliable performance across a wide temperature range. Key features include a capacitance of 330uF, a rated voltage of 50V, and a long life of 3000 hours at 105C.
| Series | Capacitance (uF) | Rated Voltage (V) | Size (mm) (D x L) | Temperature (C) | Capacitance Tolerance | Life (hours) @105C | Dissipation Factor (%) MAX (120Hz/20C) | Leakage Current (A) MAX (2min/20C) | ESR () MAX (100KHz/25C) | Ripple Current (mA rms) MAX (105C/100KHz) | Surge Voltage (V) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RC | 330 | 50 | 10 x 16 | -40 ~ +105 | 20% | 3000 | 10 | 165 | 0.084 | 840 | 58 |
| Type (D) | 5 | 6.3 | 8 | 10 | 13 | 16 | 18 | 22 |
|---|---|---|---|---|---|---|---|---|
| P | 2 | 2.5 | 3.5 | 5 | 5 | 7.5 | 7.5 | 10 |
| d | 0.5 | 0.5 | 0.5/0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 |
| a (L<20) | 1.5 | |||||||
| a (L20) | 2.0 | |||||||
RC 050 M 331 LO 10*16 TH-2A1 E t
Front: 330uF RC(M) 2246
Reverse: 50V
For precise measurements:
-40C to +105C (for 6.3~450WV)
| Item | Performance | Condition | Criteria |
|---|---|---|---|
| 1. Nominal Capacitance | Capacitance (Tolerance) | Measuring Frequency: 120Hz12Hz; Measuring Voltage: Not more than 0.5Vrms +1.5~2.0V.DC; Measuring Temperature: 202 | Shall be within the specified capacitance tolerance. |
| 2. Leakage Current | Leakage current (A) | Connected with a protective resistor (1k10) in series for 2 minutes, then measure. | I (A) 0.01CV or 3 (A) whichever is greater. (C: Capacitance (F), V: Rated DC working voltage (V)) |
| 3. Dissipation Factor | DF (%) | Nominal capacitance, for measuring frequency, voltage and temperature. | Must be within the parameters (See page 3). |
| 4. Impedance | ESR () | Measuring frequency: 100kHz; Measuring temperature: 202; Measuring point: 2mm max. from the surface of a sealing rubber on the lead wire. | Must be within the parameters (See page 3). |
| 5. Load Life Test | Characteristic changes after test. | IEC60384-4 No. 4.13; Temperature: Max operating temperature 2C with DC bias voltage plus rated ripple current for Rated life +48/0 hours. (Sum of DC and ripple peak voltage Rated working voltage). Recovering time: 16 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| 6. Shelf Life Test | Characteristic changes after test. | Stored with no voltage applied at Max operating temperature 2C for 1000+48/0 hours. Stabilized at room temperature for 16 hours. | Leakage current: Not more than 200% of specified value. Capacitance Change: Within 20% of initial value. Dissipation Factor: Not more than 200% of specified value. Appearance: No electrolyte leakage. |
| 7. Maximum Permissible Ripple Current | Ripple Current (mA rms) | Max AC current at 100kHz and max operating temperature. (Sum of DC and peak AC voltage Rated voltage). | Refer to Table-3 for frequency multipliers. |
| 8. Terminal Strength | Tensile and bending strength of terminals. | Applied force to terminals. | No noticeable changes, breakage, or looseness at the terminal. |
| 9. Temperature Characteristics | Capacitance, DF, Impedance changes at different temperatures. | Steps: 20C, -40C, 20C, 105C, 20C. Capacitance, DF, Impedance measured at 120Hz. | See detailed criteria for each temperature step. |
| 10. Surge Test | Characteristic changes after surge voltage application. | Applied surge voltage with a resistor (100 50)/CR (k) in series for 305 seconds, repeated 1000 times. Recovering time: 1-2 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 15% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| 11. Change of Temperature Test | Characteristic changes after temperature cycling. | IEC60384-4 No.4.7; 5 cycles of: +20C (3 min), -40C/-25C (302 min), +105C (302 min). | Leakage current: Not more than specified value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| 12. Damp Heat Test | Characteristic changes after humidity exposure. | IEC60384-4 No.4.12; 90~95% RH at 402C for 5008 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 10% of initial value. Dissipation Factor: Not more than 120% of specified value. Appearance: No electrolyte leakage. |
| 13. Solderability Test | Soldering wetting and coating quality. | Soldering temperature: 2455C; Dipping depth: 2mm; Dipping speed: 252.5mm/s; Dipping time: 30.5s. | Soldering wetting time: Less than 3s. Coating quality: Min 95% of immersed surface. |
| 14. Vibration Test | Inner construction and appearance after vibration. | 10Hz ~ 55Hz for 2 hours in 3 perpendicular directions. Peak amplitude: 1.5mm. Sweep rate: 10Hz ~ 55Hz ~ 10Hz in ~1 minute. Mounting method: Bracket for larger capacitors. | No intermittent contacts, open/short circuiting, damage of terminals/electrodes. No mechanical damage, electrolyte leakage, or swelling. Markings legible. |
| 15. Resistance to Solder Heat Test | Characteristic changes after solder heat exposure. | Solder bath: 2605C for 101s or 40010C for 3+0/-1s, 1.5~2.0 mm from capacitor body. Recovering time: 1~2 hours. | Leakage current: Not more than specified value. Capacitance Change: Within 5% of initial value. Dissipation Factor: Not more than specified value. Appearance: No electrolyte leakage. |
| 16. Vent Test | Vent operation. | Applies to vented products (diameter 6.3). DC test: Reversed polarity connection with selected DC current from Table 2. | Vent operates with no dangerous conditions (flames, dispersion of pieces). |
Packing Label Markings:
Packing Types:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!