Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -40℃~+105℃ |
| Lifetime | 2000hrs@105℃ |
| Capacitance | 3300uF |
| Height - Seated (Max) | 25mm |
| Pin Spacing | 5mm |
| Voltage Rating | 25V |
| Diameter | 13mm |
| Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% |
| Ripple Current | 1.299A@120kHz |
| Description | 3300uF 25V Aluminum Electrolytic Capacitors Through Hole,D13xL25mm 2000hrs@105℃ |
| Mfr. Part # | KM332M025I250A |
| Package | Through Hole,D13xL25mm |
| Model Number | KM332M025I250A |
View Detail Information
Explore similar products
High Temperature Aluminum Electrolytic Capacitor Chengx KM228M010G17RR0VH2FP0
V chip Aluminum Electrolytic Capacitors Chengx RVT1E221M0810 Rated 105C with
Aluminum Electrolytic Capacitor Guangdong TOPAZ Elec Tech ECLJ0612270M080P00 for
aluminum electrolytic capacitor HRK 400V10uF CD110 with rated voltage 400 volts
Product Specification
| Operating Temperature | -40℃~+105℃ | Lifetime | 2000hrs@105℃ |
| Capacitance | 3300uF | Height - Seated (Max) | 25mm |
| Pin Spacing | 5mm | Voltage Rating | 25V |
| Diameter | 13mm | Equivalent Series Resistance(ESR) | - |
| Tolerance | ±20% | Ripple Current | 1.299A@120kHz |
| Description | 3300uF 25V Aluminum Electrolytic Capacitors Through Hole,D13xL25mm 2000hrs@105℃ | Mfr. Part # | KM332M025I250A |
| Package | Through Hole,D13xL25mm | Model Number | KM332M025I250A |
The CapXon KM Series Aluminum Electrolytic Capacitors are designed for reliable performance in a wide range of applications. These capacitors offer stable electrical characteristics, including capacitance, voltage rating, and operating temperature. They are manufactured by Capxon Electronic (Shen Zhen) Co., Ltd. and comply with relevant industry standards. The KM series features a PET sleeve for marking and a safety vent for over-pressure protection, ensuring safe operation. They are suitable for general electronic applications and can withstand various environmental conditions, including high altitudes and specific cleaning agents. Compliance with RoHS and environmental regulations is a key aspect of their manufacturing.
| Part Number | Capacitance (F) | Capacitance Tolerance (%) | Rated Working Voltage (VDC) | Surge Voltage (VDC) | Max. Dissipation Factor (%) @ 120Hz/105 | Max. Leakage Current (A) | Operating Temperature (C) | Case Size (D* L mm) | Endurance @ 105C (Hrs) | Lead Treatment |
|---|---|---|---|---|---|---|---|---|---|---|
| KM332M025I250A | 3300 | -20~20 | 25 | 29 | 18 | 825 | -40~105 | 13X25 | 2000 | A |
| CapXon P/N | Cap. (F) | Cap. Tol. (%) | Rate W.V (VDC) | Surge Volt (VDC) | Max. D.F. (%) @ 120Hz/105 | Ripple Current 120Hz /105 (mA) | Max. L.C. (A) | Oper. Temp. (C) | Case Size D* L (mm) | Endurance /105 (Hrs) |
|---|---|---|---|---|---|---|---|---|---|---|
| KM332M025I250A | 3300 | -20~20 | 25 | 29 | 18 | 1299 | 825 | -40~105 | 13X25 | 2000 |
D: 13 mm
L: 25 mm
F: 5 mm
d: 0.6 mm
| Condition | Temperature | Humidity | Air Pressure |
|---|---|---|---|
| Standard Room Testing | 1535 | 2575%RH | 86KPa106KPa |
| Judgment Doubtful Conditions | 2510 | 4060%RH | 86KPa106KPa |
| Disputed Conditions | 201 | 6367%RH | 86KPa106KPa |
| NO. | Item | Conditions and Criterion |
|---|---|---|
| 1 | Range of working temperature | -40~105 () |
| 2 | Capacitance | Conditions: Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms. Criterion: Tolerance: -20~20% |
| 3 | Dissipation factor (tan) | Conditions: Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms. Criterion: See Table 1 |
| 4 | Leakage Current | Conditions: Rated voltage applied across capacitors and 100010% protective resistor for 1 min. Criterion: I 825 (A) |
| 5 | Terminal strength (Tensile & Bending) | Conditions: Specific loads applied for specified durations and bending cycles. Criterion: Terminal should not be loose, breakage and bad connected. (SNAP-IN type does not undergo bending test). |
| 6 | Temperature characteristic | Conditions: Testing when thermal equilibrium. Criterion: 1. Impedance ratio shall not exceed values in Table 2. 2. Leakage current Shall not more than 800% of initial specified value. |
| 7 | High temperature load | Conditions: Temperature: 105, Applied voltage: Rated DC working voltage, Test time: 2000 H. Criterion: 1. Capacitance Change Rate: C/C 20% of initial value. 2. Dissipation Factor: DF 200% of specified value. 3. Leakage Current: LC specified value. 4. Appearance: No visible damage. |
| 8 | High Temperature Exposure (Storage) | Conditions: Temperature: 105, Applied voltage: None, Test time: 1000H. Criterion: 1. Capacitance Change Rate: C/C 20% of initial value. 2. Dissipation Factor: DF 200% of specified value. 3. Leakage Current: LC specified value. 4. Appearance: No visible damage. |
| 9 | Surge Test | Conditions: Temperature: 15~35, Applied voltage: 29V, Period: Charge 30s, discharge 330s. Cycles: 1000. Criterion: 1. Capacitance Change Rate: C/C 15% of initial value. 2. Dissipation Factor: DF Original Spec value. 3. Leakage Current: LC original Spec value. 4. Appearance: No visible damage. |
| 10 | Vibration | Conditions: Frequency 10~55Hz, Amplitude 0.75mm, Acceleration 98 m/s (10g). Time: X, Y, Z directions each for 2 Hrs, total 6 Hrs. Criterion: 1. Capacitance Change Rate: C/C 5% of initial value. 2. Dissipation Factor: DF Original Spec value. 3. Leakage Current: LC original Spec value. 4. Appearance: No visible damage. |
| 11 | Solderability | Conditions: Solder Sn:96.5%, Ag:3%, Cu:0.5%. Stove temp: 2455, Immerse time: 2.00.5S. Criterion: Above 95% area of surroundings surface shall be covered by the new soldering. |
| 12 | Resistance to soldering heat | Conditions: Solder Sn:96.5%, Ag:3%, Cu:0.5%. Stove temp: 2600~3, Immerse time: 101S. Criterion: 1. Capacitance Change Rate: C/C 5% of initial value. 2. Dissipation Factor: DF Original Spec value. 3. Leakage Current: LC original Spec value. |
| 13 | Vent (for products with vent requirement) | Conditions: Various voltage and size criteria for reverse voltage or over voltage methods. Criterion: When the pressure relief vent operated, there shall be no explosion, flash, flame, spark or fire. |
| 14 | Temperature Cycling | Conditions: Referring to JIC-5101-1 (2010) No:4.16, 10 cycles. Criterion: 1. Capacitance Change Rate: C/C 5% of initial value. 2. Dissipation Factor: DF Original Spec value. 3. Leakage Current: LC original Spec value. 4. Appearance: No visible damage. |
| 15 | High temp and humidity | Conditions: Temperature: 402, Humidity: 90~95%RH, Maintained Time: 250H. Criterion: 1. Capacitance Change Rate: C/C 20% of initial value. 2. Dissipation Factor: DF 1.2 times of the original Spec. value. 3. Leakage Current: LC original Spec value. 4. Appearance: No visible damage. |
Front: KM 105 P1502 VENT CapXon 3300uF 25V
Back: (Polarity indication usually marked on the side)
| Rated Voltage (VDC) | D.F. (%) max. |
|---|---|
| 6.3 | 22 |
| 10 | 17 |
| 16 | 16 |
| 25 | 14 |
| 35 | 12 |
| 50 | 10 |
| 63 | 9 |
| 100 | 8 |
| 160 | 12 |
| 200 | 12 |
| 250 | 12 |
| 350 | 15 |
| 400 | 15 |
| 420 | 17 |
| 450 | 17 |
| 500 | 22 |
For capacitance > 1000F, add 2% per another 1000F.
| Rated Voltage (V) | Z-25/Z+20 | Z-40/Z+20 |
|---|---|---|
| 6.3 | 4 | 8 |
| 10 | 3 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 3 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
| 63 | 2 | 3 |
| 100 | 2 | 3 |
| 160 | 2 | 3 |
| 200 | 2 | 3 |
| 250 | 3 | 3 |
| 350 | 5 | 5 |
| 400 | 6 | 6 |
| 420 | 6 | 6 |
| 450 | 6 | 6 |
| 500 | 6 | 6 |
For capacitance > 1000F:
1). add 0.5 per another 1000F for -25/+20
2). add 1.0 per another 1000F for -40/+20
| CAP. (uF) \ Hz | 50(60) | 120 | 400 | 1K | 10K | 50K-100K |
|---|---|---|---|---|---|---|
| CAP10 | 0.8 | 1 | 1.30 | 1.45 | 1.65 | 1.70 |
| 10<CAP100 | 0.8 | 1 | 1.23 | 1.36 | 1.48 | 1.53 |
| 100<CAP1000 | 0.8 | 1 | 1.16 | 1.25 | 1.35 | 1.38 |
| 1000<CAP | 0.8 | 1 | 1.11 | 1.17 | 1.25 | 1.28 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!