Aluminum Electrolytic Capacitor CD11B2GM121L300T 400V 120F D16x30L Operating

Product Specification

Product Overview

The CD11B series aluminum electrolytic capacitor from DONGGUAN CHUANGHUI ELECTRONICS CO.,LTD is designed for high-temperature applications, operating reliably at 105 with a lifespan of 2000 hours. This capacitor features a voltage rating of 400V and a capacitance of 120F, with a compact D16x30L size. It is suitable for various industrial applications requiring stable performance under demanding conditions.

Product Attributes

• Brand: CHUANGHUI
• Origin: DONGGUAN CHUANGHUI ELECTRONICS CO.,LTD
• Series: CD11B
• Operating Temperature: -40 to +105
• Life Expectancy: 2000H at 105
• Sleeve Material: PET (Black with white lettering)
• RoHS/REACH Compliance: Yes

Technical Specifications

Product Structure and Dimension

Product Structure:

• Lead PIN: Aluminum & CP wire
• Rubber: Ternary ethylene propylene rubber
• Case: Aluminum
• Sleeve Material: PET
• Anode Foil: Aluminum
• Cathode Foil: Aluminum
• Paper: Plant fiber
• Electrolyte: Organic solution
• Body Material: Aluminum

Product Dimension (Unit: mm):

• D: 16 0.5
• L: 30 2
• P: 7.5 0.5
• d: 0.8 0.05

Markings

1. Rated Voltage & Nominal Capacitance (400V, 120F)
2. Cathode Mark
3. Trade Mark (CHUANGHUI)
4. Product Series & Safety Vent (CD11B, VENT for 8mm and up)
5. Rated Temperature (-40 to +105)
6. Sleeve Material (PET)

Packing Instructions

• Packaged in plastic bags, then placed in cartons.
• Label Marking: Neutral label with customer name, purchase number, part number, product series, specifications, size, quantity, production date, and lot number.

Part Number System

CD11B 2G M 121 L30 0 T

• Series: CD11B
• Voltage Code: 2G (for 400V)
• Capacitance Tolerance Code: M (20%)
• Capacitance Code: 121 (120F)
• Size Code: L30 (D16x30L)
• Finishing Code: 0 (Bulk)
• Sleeve Code: T (PET)

Reliability Tests

• Temperature Test: Parameters measured after reaching stable temperature at various stages (-40 to +105).
• Load Life Test: 2000H at 105 under rated voltage and max ripple current. Capacitance change 20%, tan 200% of initial specified value, Leakage Current initial specified value.
• Shelf Life: 1000H storage at 105. Capacitance change 20%, tan 200% of initial specified value, Leakage Current 200% of initial specified value.
• Surge Test: 1000 cycles of charging (305s) and discharging (5.50.5min) at 15-35. Capacitance change 20%, tan 200% of initial specified value, Leakage Current initial specified value.
• Terminal Strength: Tensile and bending strength tests applied to leads.
• Vibration Test: 6 hours of vibration (2 hours in 3 perpendicular directions) according to JIS C 5102.8.2 and JIS C 5025.
• Solder Ability: Meets IEC60068-6-6, with new tin adhering to >90% of immersed lead surface area at 2505 for 20.5sec.
• Resistance to Soldering Heat: Solder bath method at 2605 for 101sec. Capacitance variation within 10%, tan initial specified value, Leakage Current initial specified value, no abnormality in appearance.
• Resistance to Damp Heat (Steady State): 2408h at 402 and 9095% RH according to JIS C 5023. Capacitance variation within 10%, tan initial specified value, Leakage Current initial specified value, no abnormality in appearance.
• Safety Vent Test: Reverse working voltage applied (1A current), vent should operate within 30 minutes. No scattering of leads or foil, no sparks.

Precautions For Use

• Capacitors are polarized; ensure correct polarity to avoid damage. Use bipolar capacitors for unknown or variable polarity circuits.
• Do not exceed the rated working voltage. Recommended usage is 70%-80% of rated voltage for extended life. The sum of DC and peak AC voltage must not exceed the rated voltage.
• Do not exceed the rated ripple current to prevent overheating, deterioration, and shortened lifespan.
• Not suitable for frequent charging and discharging cycles unless specifically designed.
• Ambient temperature significantly impacts lifespan; a 10 increase can halve the life.
• Manual soldering: temperature below 280, time less than 3 seconds. Avoid direct contact between soldering tip and casing.
• Ensure adequate space above the safety vent for effective operation (2mm for 5-16mm, 3mm for 18-35mm, 5mm for 40mm+).
• Do not stress capacitor leads or terminals. Do not forcibly remove capacitors or move PCB boards by lifting the capacitor.
• The aluminum shell is not insulated from the cathode. Avoid placing conductive wires or terminals under the capacitor on the PCB.
• Store in normal temperature, humidity, acid/alkali-free environments, avoiding direct sunlight. For storage over 6 months, consider using a 1K protective resistor during reforming.
• Handle with care to avoid deformation or damage.
• Surge voltage is the maximum DC over-voltage for short periods (approx. 30s in 5min intervals).
• Avoid use in environments with direct contact to water, saltwater, oil, high humidity (>75%), harmful gases, direct sunlight, ozone, UV, radioactive substances, severe vibration/shock, or with halogen-containing fixatives/resins. Confirm compatibility with other fixatives/coatings.

Sample Inspection Report

Inspection Result: Pass