| Isolation Voltage(Vrms) | 4kV |
| Description | 4kV Pulse Transformers RoHS |
| Mfr. Part # | PH9384.034NLT |
| Model Number | PH9384.034NLT |
View Detail Information
Explore similar products
CHIP LAN FILTER for 2.5G BASE-T applications CND-tek CM3216D25-501 surface mount
Low Voltage Power Supply Transformer Driver PULSE PH9185.043NLT with Fixed Duty
Category 5 UTP Cable Support 2.5G Single Port Transformer Module CND-tek QG2433S
Voice Over IP Magnetics Modules 10 100BASE TX Series Including PULSE VP8019HF
Product Specification
| Isolation Voltage(Vrms) | 4kV | Description | 4kV Pulse Transformers RoHS |
| Mfr. Part # | PH9384.034NLT | Model Number | PH9384.034NLT |
Low Power Isolation Transformers are essential components for communications, computing, medical, industrial, and automotive market segments. They provide signal isolation between low and high voltage circuits, power gate drive circuitry for IGBTs, and power isolated communication interfaces like RS-232 and RS-485. With the increasing adoption of high voltage battery packs in automotive and energy storage, the demand for compact, high-isolation transformers is rapidly growing. These transformers are utilized in energy transfer topologies such as push-pull, half-bridge, and full-bridge, as well as energy storage topologies including quasi-resonant and discontinuous mode flybacks. Selection is based on end-application safety requirements (isolation voltage, insulation level, safety distances) and electrical requirements (topology, input/output voltages, operating frequency, output power). Pulse parts are designed for UL and TUV compliance with standards like IEC60950, IEC61558, and IEC60601, with some designs holding specific safety certifications. Both commercial and automotive grades are available.
| Series | Isolation Voltage (Hi-pot) | Insulation Type | UL Creepage Distance (Pri-Sec) | Volt-usec Rating (V-usec) | Topology | IATF | L (mm) | W (mm) | H (mm) |
|---|---|---|---|---|---|---|---|---|---|
| PH9084 | 1500Vrms | Functional | - | 28-37 | Energy Transfer (schematic 1) | 6.6 | 5.8 | 5.3 | |
| PA2777 | 1500Vrms | Basic | 1.4mm | 9.3 | Energy Transfer (schematic 4) | 8.0 | 6.6 | 5.3 | |
| P0926 | 1500Vdc | Functional | - | 23 | Energy Transfer (schematic 2) | 8.3 | 6.9 | 3.0 | |
| PG1427, PAG6658 | 2700Vdc | Functional Basic | 2.8mm | 21-30 | Energy Transfer (schematic 3) | 8.6 | 6.7 | 2.5 | |
| PE-68386, PA2001 | 1500Vrms | Basic Functional | - | 21-30 | Energy Transfer (schematic 4) | 8.6 | 6.7 | 3.6 | |
| PA0264, PA2004 | 1000Vrms | Functional | - | 12-20 | Energy Transfer (schematic 2) | 9.5 | 7.1 | 5.3 | |
| PA1323 | 1500Vrms | Functional | - | 21.7 | Energy Transfer (schematic 4) | 10.2 | 7.5 | 11.0 | |
| PH9572, PH9572A PM9572, PM9572A | 1500Vrms 2500Vrms | Functional Basic | 42-84 | Energy Transfer (schematic 1) | Yes | 9.5 | 8.1 | 5.1 | |
| PH9085, PM2180 | 2500Vrms | Functional | - | 22-24 | Energy Transfer (schematic 1) | Yes* | 10.5 | 9.0 | 6.5 |
| PMT9085 | 3000Vrms | Reinforced | 6.4mm | 15-23 | Energy Transfer (schematic 4) | Yes | 11.8 | 8.8 | 4.0 |
| P0544, PA2002 | 1500Vdc | Functional | 1.4mm | 45-60 | Energy Transfer (schematic 2) | 11.8 | 8.8 | 4.0 | |
| PA0184, PA0297, PA0510, PA2007, PA2008, PA2009 | 1500Vrms | Basic | 1.4mm | 27-53 | Energy Transfer (schematic 2) | 11.8 | 8.8 | 4.0 | |
| PA0173, PA0185 PA2005, PA2006 | 1500Vrms | Basic | 1.4mm | 17-26 | Energy Transfer (schematic 2) | 10.9 | 9.7 | 2.7 | |
| PA3493 | 1650Vrms | Basic | 1.4mm | 21.7 | Energy Transfer (schematic 4) | 10.0 | 10.0 | 12.5 | |
| PH9184 | 4000Vrms | Basic | 4.0mm | 200-296 | Energy Transfer (schematic 1) | 10.0 | 10.0 | 12.5 | |
| PH9185, PM2190 | 5000Vrms | Reinforced | 8.0mm | 36-110 | Energy Transfer (schematic 1) | Yes* | 10.5 | 10.3 | 12.5 |
| PH9496 | 2500Vrms | Basic | 6.2mm | - | Energy Transfer (schematic 4) | 9.2 | 12.5 | 7.6 | |
| PH9384, PM2185 | 4000Vrms | Reinforced | 8.3mm | - | Energy Transfer (schematic 1) | Yes* | 13.0 | 10.0 | 12.5 |
| PH0416, PM0416 | 5000Vrms | Reinforced | 8.3mm | - | Energy Transfer (schematic 4) | Yes | 13.0 | 12.0 | 7.1 |
| PH9363 | 2500Vrms | Basic | 2.8mm | - | Energy Transfer (schematic 4) | 16.5 | 15.6 | 7.1 | |
| PH9385, PM2155 PAG6547, PMG6547 | 4000Vrms | Basic Reinforced | 12.0mm | 70-109 | Energy Transfer (schematic 1) | Yes* | 16.7 | 16.5 | 14.2 |
| PH9400, PH9400A | 4000Vrms 5000Vrms | Basic Reinforced | 12.0mm | 125-375 | Energy Transfer (schematic 1) | - | - | - |
Available Schematics (multiple turns ratios available): SCHEMATIC 1, SCHEMATIC 2, SCHEMATIC 3, SCHEMATIC 4
*See specific datasheet for details
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>300
Ecer Certification:
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Changsha Purple Horn will also responsible with exporting and logistic business. there is professional factory Changsha Purple Horn which focus on desigining and manufacture. ... Changsha Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Changsha Purple Horn will also responsible with exporting and logistic business. there is professional factory Changsha Purple Horn which focus on desigining and manufacture. ...
Get in touch with us
Leave a Message, we will call you back quickly!