Changsha Purple Horn E-Commerce Co., Ltd.
| Operating Temperature | -40℃~+85℃ |
| Description | SMD-6P,4.8x3.8mm Pulse Transformers RoHS |
| Mfr. Part # | JXDBT3F-434PT-S226-2S |
| Package | SMD-6P,4.8x3.8mm |
| Model Number | JXDBT3F-434PT-S226-2S |
View Detail Information
Explore similar products
CHIP LAN FILTER for 2.5G BASE-T applications CND-tek CM3216D25-501 surface mount
Low Voltage Power Supply Transformer Driver PULSE PH9185.043NLT with Fixed Duty
Category 5 UTP Cable Support 2.5G Single Port Transformer Module CND-tek QG2433S
Voice Over IP Magnetics Modules 10 100BASE TX Series Including PULSE VP8019HF
Product Specification
| Operating Temperature | -40℃~+85℃ | Description | SMD-6P,4.8x3.8mm Pulse Transformers RoHS |
| Mfr. Part # | JXDBT3F-434PT-S226-2S | Package | SMD-6P,4.8x3.8mm |
| Model Number | JXDBT3F-434PT-S226-2S |
This RF Transformer, model JXDBT3F-434PT-S226-2S, is designed for Frequency Mixer applications, CATV, TVB-D, HomePlug AV MAC and PHY, and MII/RMII host interfaces. It incorporates common mode chokes to prevent signal interference and improve the signal-to-noise ratio. The transformer also provides isolation, enhancing transmitter and receiver circuitry balance while reducing common mode noise and EMI. Materials used are UL94V-0 recognized and meet IEC 695-2-2 standards. Designed for compact devices, it converts between unbalanced and balanced signals in tuner circuits for terrestrial digital broadcast. Windings utilize paired or triple wires for uniformity, and base pins allow direct PCB mounting. It is ideal for double-balanced mixers, broadband transformers, transistors, and impedance conversion, with options for different inductance values and Q specifications.
| Specification | Details |
|---|---|
| Product Name | RF Transformer |
| Customer P/N | Not specified |
| JXD P/N | JXDBT3F-434PT-S226-2S |
| Issued Date | 2022-10-11 |
| Revision | A |
| Application Areas | Frequency Mixer, CATV, TVB-D, HomePlug AV MAC and PHY, MII/RMII host interface, integrated memory, insulation, terrestrial digital broadcast tuner circuits |
| Material Compliance | UL94V-0 recognized, IEC 695-2-2 (needle flame test) |
| Dimensions | Unit: mm (Refer to Mechanicals section for drawing) |
| Electrical Specifications @ 25 | 3~200MHz, Z=75 ohms |
| Turns (Pin1~Pin2) | 3Ts |
| Turns (Pin2~Pin3) | 3Ts |
| Turns (Pin4~Pin6) | 6Ts |
| Insertion Loss | 3MHz~200MHz @ 2.0dB Max |
| Impedance Ratio | 75 : 75 |
| Input Return Loss | 3MHz~200MHz @ 6.0dB Min |
| Operating Temperature | -40 to +85 |
| Storage Temperature | -55 to 100 |
| RF Power | 0.25W |
| Plastic Base Material | PM9820 |
| Ferrite Core Material | RID Core Ni-Zn uiac1000 |
| Copper Wire Diameter | 0.10mm /0UEW 155 |
| Silicon Varnish | 1EVA-V1380FC |
| Solder Bar Material | Sn/Cu: 99.3/0.7 |
| Package Type | Carrier Tape & Reel |
| Carrier Tape Material | Black Anti-Static Polystyrene |
| Packing Quantity | 2000pcs/Reel, 3Reels/Middle Carton, 5 Middle Cartons/Big Carton (30000pcs/Big Carton) |
| Reliability Testing - Temperature Rise Test | 40 MAX (t) with allowed DC current for 4 hours |
| Reliability Testing - Solder Heat Resistance | Preheat: 150 100s Max; Solder Temp: 2605; Dip Time: 10s Max |
| Reliability Testing - Vibration Test (Low Frequency) | Amplitude: 1.5mm; Frequency: 10~55~10Hz/1Min; Direction: X,Y,Z; Duration: 2Hrs/X,Y,Z |
| Reliability Testing - Shock Test | Dropped 10 times from 1M height onto 3cm wooden board |
| Reliability Testing - Solderability Test | >90% terminal electrode covered with solder; Preheat: 150 120s; Solder Temp: 2455; Dip Time: 10s MAX |
| Reliability Testing - Component Adhesion (Push Test) | 1.5Kg MIN |
| Reliability Testing - Component Adhesion (Pull Test) | 1.5Kg MIN |
| Reliability Testing - Flexture Strength | Forces applied should not damage dielectric; Bend substrate by 2mm and return |
| Reliability Testing - Resistance to Solvent Test | Withstand 6 minutes of alcohol without case deformation, appearance change, or marking alteration |
| Reliability Testing - Climatic Test (Temperature Characteristic) | -40 ~ +85 |
| Reliability Testing - Climatic Test (Humidity Test) | 602, 90%~95%RH, Max rated current, 962Hrs |
| Reliability Testing - Climatic Test (Low Temperature Storage) | -402, 962Hrs, 10 cycles, 30min per cycle |
| Reliability Testing - Climatic Test (Thermal Shock Test) | Temp1: -452, Temp2: 1252, 10 cycles, 30min per cycle |
| Reliability Testing - High Temperature Storage | 1252, 962Hrs, with max rated current |
| Reliability Testing - Life Test (High Temperature Load Life Test) | 1252, 50012Hrs, with allowed DC current |
| Reliability Testing - Life Test (Humidity Load Life Test) | 602, 90~95% RH, 50012Hr, with allowed DC current |
| Hazardous Substance Compliance | Fulfills 2002/95/EC-RoHS restrictive list (Cadmium, Mercury, Lead, Hexavalent Chromium, PBB, PBDE) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>300
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Changsha Purple Horn will also responsible with exporting and logistic business. there is professional factory Changsha Purple Horn which focus on desigining and manufacture. ... Changsha Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Changsha Purple Horn will also responsible with exporting and logistic business. there is professional factory Changsha Purple Horn which focus on desigining and manufacture. ...
Get in touch with us
Leave a Message, we will call you back quickly!