China factories

Chat Now Send Email
China factory - Shanghai Fradwell Industrial Automation Co., Ltd.

Shanghai Fradwell Industrial Automation Co., Ltd.

  • China,Shanghai ,Shanghai
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Fluke 707 705 Loop Calibrator, 0.015% mA Accuracy, for 4-20 mA Loop and
China Fluke 707 705 Loop Calibrator, 0.015% mA Accuracy, for 4-20 mA Loop and

  1. China Fluke 707 705 Loop Calibrator, 0.015% mA Accuracy, for 4-20 mA Loop and

Fluke 707 705 Loop Calibrator, 0.015% mA Accuracy, for 4-20 mA Loop and

  1. MOQ: 1
  2. Price: $1000 - $2000
  3. Get Latest Price
Payment Terms L/C,D/A,D/P,T/T
mA Accuracy 707: 0.015 % Rdg + 2 on measure, source and simulate. 705: 0.02 % measure, 0.025 % source and simulate
Delivery Time 3-5Workdays
HART Mode 707 only: 250 Ω in series with the 24 V loop, 950 Ω drive at 20 mA. Not available on 705
Freight Charge For Industrial Equipment (E.G., PLC Modules, Inverters..), Shipping Cost Varies By Package Weight/Volume And Delivery Location. Contact Our Sales Team For A Customized Shipping Solution And Quot
Packaging Details Original
Voltage Measurement 0 to 28 V dc, 1 mV resolution
Shipping Term International Express(DHL/FEDEX/TNT/UPS/ARAMEX)/Sea Freight / Air Freight / International Special Line
Current Range 0 to 24 mA measurement; 0 to 20 mA or 4 to 20 mA source and simulate
Loop Power 24 V internal; drive 1200 Ω (707) or 1000 Ω at 24 mA (705)
Current Resolution 0.001 mA (1 µA)
Model Number Fluke 707 705
Brand Name Fluke

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Payment Terms L/C,D/A,D/P,T/T mA Accuracy 707: 0.015 % Rdg + 2 on measure, source and simulate. 705: 0.02 % measure, 0.025 % source and simulate
Delivery Time 3-5Workdays HART Mode 707 only: 250 Ω in series with the 24 V loop, 950 Ω drive at 20 mA. Not available on 705
Freight Charge For Industrial Equipment (E.G., PLC Modules, Inverters..), Shipping Cost Varies By Package Weight/Volume And Delivery Location. Contact Our Sales Team For A Customized Shipping Solution And Quot Packaging Details Original
Voltage Measurement 0 to 28 V dc, 1 mV resolution Shipping Term International Express(DHL/FEDEX/TNT/UPS/ARAMEX)/Sea Freight / Air Freight / International Special Line
Current Range 0 to 24 mA measurement; 0 to 20 mA or 4 to 20 mA source and simulate Loop Power 24 V internal; drive 1200 Ω (707) or 1000 Ω at 24 mA (705)
Current Resolution 0.001 mA (1 µA) Model Number Fluke 707 705
Brand Name Fluke
High Light Fluke 707 loop calibrator ,0.015% mA accuracy calibrator ,4-20 mA transmitter testing
Product Overview

The Fluke 707 and 705 Loop Calibrators are purpose-built for 4–20 mA loop and transmitter testing. Both models deliver 0.015 % mA accuracy on the 707 (0.02 % measure / 0.025 % source on the 705), 1 µA resolution, simultaneous mA and % of span display, and a 24 V internal loop supply — giving technicians a single, pocket-sized instrument for trimming, linearity checks, and loop troubleshooting.

Key Features
  • 0.015 % of reading plus 2 counts on mA — measure, source, and simulate all carry the same specification on the 707. That is the accuracy class that lets you trim a transmitter rather than just confirm it is alive.
  • 1 µA resolution (0.001 mA). On a 4–20 mA loop that is 1 part in 16,000 of span. You can see a transmitter move when you nudge it, instead of stepping past the value you wanted.
  • Simultaneous mA and % of span. The display shows both at once, so you never convert in your head while holding two leads on a terminal block in a wet basement.
  • Quick Click rotary control, one-handed. The 707's knob changes value by a click, without a knob-clutch or a menu. Set the value with your thumb, leave your other hand free for the leads.
  • 25 % push-button steps and 0–100 % span check. Five-point linearity check in five presses. The 705 does this with buttons rather than a knob, and it does it just as fast.
  • Selectable slow ramp, fast ramp, and step ramp. Smooth output for valve slewing and for watching a positioner track, instead of a single jump you cannot follow.
  • 24 V internal loop supply with simultaneous mA measurement. Power the transmitter and read its output from the same instrument. No separate 24 V supply, no carrying a second meter.
  • 1200 Ω drive capability (707), 1000 Ω at 24 mA (705). Enough to drive a transmitter plus a receiver plus the cable resistance, which is where cheaper loop calibrators run out.
  • HART mode on the 707. Inserts a 250 Ω resistor in series with the 24 V loop so that a HART communicator can be connected across the loop while you work. The drive capability drops to 950 Ω at 20 mA in this mode — by design, not a fault.
  • Battery changes without breaking the calibration seal. A 9 V cell, one screw-free door. Important if the instrument is part of a controlled calibration system.
  • Three-year warranty, MIL-T-28800 Class 2 shock and vibration.
Applications
  • Transmitter zero and span trim. Source 4.000 mA, confirm the control system reads 0 %; source 20.000 mA, confirm 100 %. With 1 µA resolution you can find the exact point where the DCS output register steps, which is what a proper trim requires.
  • Linearity checks in five presses. The 25 % step function walks 4, 8, 12, 16, 20 mA. Record the receiver's reading at each point; any deviation that is not straight is a transmitter problem, not a wiring problem.
  • Loop troubleshooting without a second instrument. Insert the calibrator in series, read the actual loop current, compare with what the transmitter should be delivering. The 24 V supply means you can do this on a bench with a bare transmitter as easily as in the field.
  • Valve and positioner slewing. Slow ramp for watching a positioner track smoothly, step ramp for finding the dead band. A single jump to 100 % tells you nothing about a sticky actuator.
  • Control room and panel checks. 28 V dc measurement on the loop supply rails, mA measurement on the signal, both from a 340 g instrument that fits in a jacket pocket.
  • HART loop work on the 707. With the 250 Ω resistor switched in, a HART communicator can be connected across the live loop while the calibrator holds the mA value. Note this is a convenience for coexistence, not a substitute for the communicator.
  • Typical sectors: chemical and petrochemical (transmitter maintenance), water and wastewater (level and flow loops), food and beverage (CIP and pasteurisation loops), power generation (boiler and cooling water instrumentation), pulp and paper.
Frequently Asked Questions
Q1. What is the difference between the 705 and the 707?

Four things. Accuracy: the 707 is 0.015 % of reading on measure, source, and simulate; the 705 is 0.02 % on measure and 0.025 % on source and simulate. Interface: the 707 has the Quick Click rotary knob, the 705 uses push buttons. Drive capability: 1200 Ω on the 707 versus 1000 Ω at 24 mA on the 705. And HART mode, which only the 707 has. Everything else — 1 µA resolution, 25 % steps, ramps, span check, 24 V loop power, 28 V dc measurement, 9 V battery, three-year warranty — is on both.

Q2. The 707 has HART mode — can it talk to my HART transmitter?

No. HART mode switches a 250 Ω resistor into series with the 24 V loop supply so that a separate HART communicator can be clipped across the loop while the calibrator is connected. It does not read or write HART parameters, it has no HART modem and no device description library. If you need to configure a HART device, that is a 475 or a 709H, not a 707. This is the single most common misunderstanding about this model and it is worth one line of small print on your page.

Q3. Can it source 0–10 V, or simulate a thermocouple?

No. Both instruments source and measure current (0–20 and 4–20 mA) and measure dc voltage up to 28 V. Neither sources voltage, and neither does frequency, resistance, thermocouples, or RTDs. If you need voltage sourcing or temperature, you are looking at the 715, 724, or 725, not the 705/707.

Q4. Is the loop calibrator a "signal generator"?

Only in the sense that it generates a 4–20 mA signal. It is not a general-purpose signal generator: no waveforms, no voltage output, no frequency. Calling it one on a global storefront attracts buyers looking for a function generator and produces returns.

Q5. Does it need an external power supply to simulate a transmitter?

Yes. In simulate mode the 707 and 705 present a variable resistance to the loop and need an external loop voltage of 12 to 30 V — typically the loop's own supply, or the calibrator's 24 V supply used in source mode instead. Source mode drives the loop from the internal 24 V and needs no external supply. Knowing which of the two modes you are in is the difference between a working test and a confusing one.

Q6. What battery does it take, and what comes in the box?

One 9 V alkaline cell, changed through a door that does not break the calibration seal. The data sheet's accessories line begins with a set of alligator-clip test leads and a 9 V alkaline battery, but the text available is cut off after that, so confirm the exact contents against your own box before publishing a "what's included" list — do not copy a competitor's list. Fluke does not publish a battery runtime figure for these models in the specification table.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Exporter

  • Ecer Certification:

    Verified Supplier

About Us: Beyond Components, We Deliver Certainty Shanghai Fradwell Industrial Automation Co., Ltd — Your Trusted Partner in Industrial Automation. With over two decades of industry expertise, we have evolved from a traditional supplier into a one-stop integrated solutions provider f... About Us: Beyond Components, We Deliver Certainty Shanghai Fradwell Industrial Automation Co., Ltd — Your Trusted Partner in Industrial Automation. With over two decades of industry expertise, we have evolved from a traditional supplier into a one-stop integrated solutions provider f...

+ Read More

Get in touch with us

  • Reach Us
  • Shanghai Fradwell Industrial Automation Co., Ltd.
  • No. 168, Chengnan Road, Pudong New Area, 201399 Shanghai, China
  • https://www.industrial-automationcontrol.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement