WEYO AUTO TECH
| Payment Terms | L/C, T/T |
| Supply Ability | 5000 units per month for small parts. 1000 units per month for large parts |
| Delivery Time | 7 - 15 days for small orders, 15 - 30 days for large orders |
| Packaging Details | Customized packaging to protect products |
| Brand Name | WEYO |
| Model Number | ZS(AB)T |
| Place of Origin | China |
View Detail Information
Explore similar products
HPAS High Pressure Single Seat Angle Valve Pneumatic Proportional Valve
HTC Boiler Feed Pump Minimum Flow Control Valve 50mm 65mm 80mm 100mm Nominal
HPC High Pressure Cage Regulation Valve 40-200mm Nominal Diameter
HPAC High Pressure Cage Type Cast Angle Valve ANSI 900 1500 2500 JIS 63K
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 5000 units per month for small parts. 1000 units per month for large parts |
| Delivery Time | 7 - 15 days for small orders, 15 - 30 days for large orders | Packaging Details | Customized packaging to protect products |
| Brand Name | WEYO | Model Number | ZS(AB)T |
| Place of Origin | China | ||
| High Light | Corrosion Resistant diaphragm valve ，Pneumatic Piston diaphragm valve ，Corrosion Resistant pneumatic diaphragm valve | ||
ZS(AB)T Pneumatic Piston Diaphragm Valve
The ZS A/B/T type pneumatic piston diaphragm control valve has better stability and greater pressure difference resistance than ZJHT within a larger range of nominal diameters, while being relatively small in size and light in weight. However, it must be equipped with a valve positioner to achieve proportional regulation control. A solenoid valve can be used for two-position control. The ZS A/B/T type consists of a ZS A/B type spring-loaded piston actuator and a diaphragm control valve. It is used for the regulation and control of strong corrosive media such as strong acids and alkalis, as well as high-viscosity media with fibers, toxic and harmful media.
| Main technical parameters | ||||||||||||||||||||||||||
|
Nominal diameter DNmm |
15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | |||||||||||||
|
Rated flow coefficient Kv |
8 | 12 | 16 | 38 | 60 | 68 | 90 | 150 | 300 | 500 | 600 | 1200 | 1600 | |||||||||||||
|
Nominal pressure MPa |
1 | |||||||||||||||||||||||||
|
Nominal pressure |
Model |
ZS | A B |
-1 | ZS | A B |
-2 | ZS | A B |
-3 | ZS | A B |
-4 | ZS | A B |
-5 | ZS | A B |
-6 | |||||||
|
Cylinder diameter mm |
80 | 100 | 125 | 160 | 200 | 250 | ||||||||||||||||||||
|
Stroke mm |
10 | 16 | 25 | 40 | 60 | |||||||||||||||||||||
|
Spring range KPa |
40～200,80～240,Two-position air supply pressure,400～600 | |||||||||||||||||||||||||
|
Flow characteristic |
Approximately quick-opening |
|||||||||||||||||||||||||
|
Flange standard |
JB/T79.1-94 | |||||||||||||||||||||||||
| Performance indicators | ||||
|
Item |
With positioner |
Item | With positioner | |
|
Basic error % |
≤±2.5 |
Deviation at start and end points % |
±3 | |
|
Hysteresis % |
≤2.5 |
Allowable leakage L/h |
Rubber diaphragm |
0.01%×Rated capacity of the valve |
|
Dead band % |
≤1.0 |
F46 diaphragm |
0.5×Rated capacity of the valve | |
|
Rated stroke deviation % |
±2.5 | |||
| Materials of main components and applicable temperature ranges | ||||
|
Valve body material |
Lining material |
Diaphragm material |
Operating temperature (℃) |
Applicable occasions |
| HT200 | 无 | Chloroprene rubber | 0～65 | non-corrosive occasions; abrasives, mud |
| HT200 | F46 | fluororubber | -20～+180 |
Strong acids, strong alkalis, strong oxidants, and general organic solvents. Not suitable for slurry-like media. |
| HT200 | F46 | F46 | -20～+200 | It has better corrosion resistance than the above-mentioned ones. |
| ZG1Cr18Ni9Ti | 无 | fluororubber | -20～+180 | Media such as general acids, alkalis, and organic solvents |
| Note: The valve body can be made of corrosion-resistant materials, and the diaphragm material is made of special fluororubber, with a pressure up to PN16 and PN25. | ||||
| Nominal diameter DN(mm) |
Overall dimension | |||
| A | H | H1 | L | |
| 15 | 94 | 290 | 48 | 140 |
| 20 | 300 | 53 | 145 | |
| 25 | 148 | 420 | 58 | 155 |
| 32 | 430 | 68 | 165 | |
| 40 | 185 | 521 | 73 | 190 |
| 50 | 528 | 80 | 210 | |
| 65 | 232 | 680 | 90 | 240 |
| 80 | 688 | 98 | 270 | |
| 100 | 698 | 108 | 335 | |
| 125 | 283 | 880 | 123 | 375 |
| 150 | 987 | 140 | 410 | |
| 200 | 945 | 168 | 540 | |
| 250 | 283(Double cylinder) | 1180 | 200 | 650 |
| Code of valve body material, lining and diaphragm | |||||||
| Base and lining | HT200 | ZG1Cr18Ni9Ti | diaphragm | ||||
| none | F46 | lined with chlorotrifluoroethylene | chloroprene rubber | fluororubber | F46 | ||
| code | 1 | 3 | 2 | 4 | 1 | 3 | 2 |
| Optional accessories |
|
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2003
Total Annual:
141790014-161450000
Employee Number:
1000~1200
Ecer Certification：
Verified Supplier
High-End Die-Shanghai WEYO Automation Technology Co., Ltd. was established in 2021 and is headquartered in Shanghai. It is an innovative technology enterprise that specializes in high-end industrial automation equipment, core components supply, technical services, and solution provision. With the co... High-End Die-Shanghai WEYO Automation Technology Co., Ltd. was established in 2021 and is headquartered in Shanghai. It is an innovative technology enterprise that specializes in high-end industrial automation equipment, core components supply, technical services, and solution provision. With the co...
Get in touch with us
Leave a Message, we will call you back quickly!