Single Disc 200mm Metallographic Grinding and Polishing Machine Stepless Speed

Product Specification

Single Disc 200mm Metallographic Grinding and Polishing Machine Stepless Speed 50-600rpm

Brief Introduction:

iqualitrol iGrind-813 is suitable for pre-grinding, grinding and polishing metallographic specimens, it can run at a revolution of 50rpm to 600rpm,which favors the machine with wide applications.

This machine equips with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure.

Featuring easy operation and reliable performance, it is an indispensable device for factories, research institutions and college labs to prepare metallographic specimen.

Technical Specifications:

High-end Metallographic Grinding Polishing Machine

Two working plates, standard plates dimension 250mm, 50% larger than normal grinding-polishing machine

Six pieces Φ30mm samples can be polished simultaneous

Single point pneumatic holding, no demo gripper;

Grinding and polishing procedure (rough and fine) are continuously done, no machine transition;

Frequency Converter control, three-level constant speed mode and variable Speed mode:

1.Three level constant speeds: customer can define three common speeds for pre-grinding, grinding and polishing

2.Variable speed mode: grinding speed 60-1000n/min

3.Eight sections programmable control, automatically stop, convenient for customer getting metallographic demos

Beautiful outlook and good quality.

The metallographic grinding and polishing machine made by iqualitrol has passed CE certification. It features a sturdy and durable cast aluminum base, equipped with high-precision spindle and transmission mechanism, which effectively absorbs vibration during grinding and greatly increases comfort in use. It can obtain smoother grinding samples and reduce laboratory noise.

The machine can be equipped with a fast magnetic adapter, compatible with various diamond grinding systems, facilitating quick switching of various grinding consumables and greatly expanding the scope of equipment applications.

The stainless steel ceramic faucet customized by a Taiwanese sanitary ware manufacturer is used to meet the special needs of metallographic grinding, including water flow rate and angle, while also being aesthetically pleasing and practical.

The drainage system adopts an anti-clogging triangular waterway design to solve the problem of clogging caused by grinding consumables for long-term users. We use the shortest waterway distance and angle design to reduce the probability of clogging.

The waterproof film panel has 9 sets of grinding and polishing parameter memory functions. Different grinding speeds, directions, and times can be set for different materials and requirements, which can be changed at any time to meet different grinding and polishing needs.

When used for automatic polishing, an automatic dripping device can be purchased to allow polishing consumables (diamond suspensions, alumina powder, final polishing liquid) to automatically drip onto the polishing disc according to the set time.

HPA-1 Metallographic Grinding Machine designed through various investigation and gathering opinions and requirements of various users. Adapt to the needs of grinding more material. The disc diameter greater than the domestic similar products. The speed of the mill is different from domestic products, is an excellent sample grinding equipment.