Power Take-Off PTO-3564JW For Hino RE50 RE61 RE62 Transmission Gearbox HINO

The Power Take-Off (PTO) Model PTO-3564JW / PTO-35/64JW is a premium-quality direct replacement unit designed specifically for Hino RE50, RE61, and RE62 series transmissions found in Hino 300 Series trucks. This side-mounted PTO engages with the transmission's internal gear set to divert engine power to external auxiliary equipment.

• OE Quality: Manufactured to strict dimensional and material specifications for perfect fit and function
• Lightweight Aluminum Housing: Reduces overhung load and stress on the transmission
• Sliding Sleeve Engagement: Provides positive engagement from minimal movement
• Diaphragm Vacuum Shift: High force, positive/repeatable movement for reliable actuation
• Multiple Control Options: Available with pneumatic, mechanical, or electric control
• Broad Transmission Compatibility: Specifically designed for Hino RE50, RE61, and RE62 transmissions
• Direct Replacement: Matches OE mounting flange, bolt pattern, and output shaft configuration
• Long Service Life: Engineered for commercial truck duty cycles

This PTO is specifically designed for Hino commercial trucks and transmissions:

• Hino Applications: Hino 300 Series (with RE50, RE61, RE62 transmissions)
• Transmission Specifications:
  • Hino RE50 - 5-Speed Manual Transmission
  • Hino RE61 - 6-Speed Manual Transmission
  • Hino RE62 - 6-Speed Automatic Transmission
• Mounting Configuration: 6-Bolt Left Side Opening

1. Ensure vehicle is safely parked - Apply parking brake and chock wheels
2. Disconnect battery - Always disconnect the negative terminal before working
3. Drain transmission fluid - If required, partially drain to prevent spillage
4. Locate the PTO mounting opening - Identify the 6-bolt left-side opening
5. Remove the cover plate - Remove transmission cover plate from PTO opening
6. Inspect the opening - Check transmission opening and internal gear for wear
7. Clean mating surfaces - Thoroughly clean transmission mounting surface and PTO flange
8. Install new gasket - Position new mounting gasket on transmission opening
9. Install the PTO - Carefully position PTO; align internal gear engagement
10. Install mounting bolts - Hand-start all bolts; tighten to manufacturer torque specs
11. Connect control lines - Connect pneumatic, mechanical, or electrical control linkage
12. Check for proper engagement - Verify PTO engages and disengages smoothly
13. Refill transmission fluid - Top up to correct level
14. Test operation - Start engine and engage PTO; verify auxiliary equipment operation
15. Check for leaks - Inspect PTO mounting area for fluid leaks

• Material Verification: Confirms aluminum housing and steel gear composition meet specifications
• Dimensional Inspection: Mounting flange, bolt pattern, and output shaft verified within OEM tolerances
• Gear Tooth Inspection: 35/22 output gear set checked for proper mesh and surface finish
• Functional Testing: Each PTO tested for smooth engagement and disengagement
• Leak Testing: Housing and seals tested for leak-proof integrity
• Visual Inspection: 100% checked for casting defects, machining flaws, or damage
• Packaged Safely: Protected and packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Power Take-Off PTO-3564JW For Hino RE50 RE61 RE62 Transmission Gearbox HINO Truck Parts, please contact our sales team for a competitive quote and expert technical support.