Industrial Dissolved Air Flotation System For Wastewater Treatment For Oil

Air flotation equipment is a highly efficient solid-liquid and liquid-liquid separation device in the water treatment industry. It utilizes a pressurized dissolved air system to generate uniform microbubbles, precisely adsorbing suspended solids, emulsified oil, colloidal and flocculent pollutants in the water. These form low-density complexes that quickly float to the surface and are then removed by a scraping system, achieving purification. The equipment is compact, operates stably, has high separation efficiency, and occupies a small area. It is suitable for the pretreatment and advanced treatment of municipal sewage and industrial wastewater, effectively reducing SS, grease, and some COD levels. Its effectiveness is further enhanced when used in conjunction with flocculation processes, making it a key purification piece of equipment at the front end of water treatment.

The DAF (Dissolved Air Flotation) system is an essential pretreatment equipment for efficiently removing Total Suspended Solids (TSS), Oil & Grease (O&G), and partial COD from industrial wastewater and municipal sewage . This system generates micro-fine bubbles hat attach to suspended particles in the wastewater, forming flocs with lower density than water that rapidly rise to the surface. A skimming mechanism then achieves solid-liquid separation . The KD-DAF series is widely used in food processing, petrochemical, papermaking, printing and dyeing, aquaculture, and other industries, ensuring stable effluent quality and reducing the load on subsequent biological or advanced treatment processes.

• High-Efficiency Micro-Bubble Generation System
  Utilizing a patented multi-stage centrifugal reflux pump combined with a high-efficiency air dissolving tank, the air dissolution efficiency reaches over 90%. Through specially designed releasers, it instantly generates micro-fine bubbles with diameters of 30-50μm—uniform, dense, and stable. Compared to traditional dissolution systems, the bubble count increases by 30% and adhesion efficiency improves by 25%, significantly enhancing TSS and O&G removal rates. TSS removal can reach 90%-95%, while oil & grease removal exceeds 95%.
• Intelligent Control System
  Equipped with a PLC touch screen control system for fully automatic operation:
  
  • Automatically adjusts reflux flow and dissolution pressure based on influent load
  • Adjustable intermittent/continuous operation of the skimmer for different water quality conditions
  • Real-time monitoring of air dissolving tank level and pressure, automatic air replenishment and drainage
  • Automatic fault alarm with fault information display, enabling unattended operation
• Premium Materials & Structural Design
  The main body is made of Q235 carbon steel or stainless steel 304/316L, lined with high-quality anti-corrosion coating or epoxy asphalt paint, resistant to wastewater corrosion, with a service life of over 15 years. Key components such as the dissolution pump, releasers, and skimmer are selected from well-known domestic and international brands, ensuring long-term stable operation. The compact integrated design occupies minimal floor space and is easy to install, making it particularly suitable for renovation projects with space constraints.

1. Inlet Mixing: Raw water enters the reaction zone and is thoroughly mixed with coagulants and flocculants to form flocs.
2. Dissolved Air Preparation: A portion of clean water is pressurized by the dissolution pump and enters the air dissolving tank, where air is forcibly dissolved into the water, forming supersaturated dissolved air water.
3. Micro-Bubble Generation: The dissolved air water enters the main flotation tank through specially designed releasers. The sudden pressure drop releases supersaturated air as micro-fine bubbles.
4. Flotation Separation: Micro-bubbles attach to the surface of flocs, forming scum with lower density than water that rapidly rises to the surface.
5. Scum Skimming & Sludge Discharge: The skimmer scrapes the scum into the scum trough. Treated clean water is discharged through the water collection pipe, and bottom sediment sludge is regularly discharged.

Jiangsu Kingdom Environmental Technology Co, Ltd is located in Yixing China Enrironmental Science and Technology industial Park, focus on environmental technology research ana development water irealment protessional equipment development and Supporting, emvironmental protection facilities housekeeping services. We are a collection of technalogy and product development, design and consulting, sewage plant operations as one of the custody of professional, comprehensive envlronmental management services. The service scope covers urban sewage treatment, industrial wastewater treatment, village sewage treatment and soil and water environmental restoration, we also have a professional team of environmental science and Engineering, Environmental monitoring, chemical engineering,mechanical engineering, Internet of things automation, financial management,etc. In addition ,We also have the ability to produce high-quality equipment of the unit production workshop. Excellent machining equipment, perfect detection means, strict process control measures and systematic quality assurance system guarantee the production of high-quality equipment.

 

• Q1. How to order reverse Dissolved Air Flotation?
  A: First, please inform us of your requirements or application scenarios. Second, we will provide a quotation based on your requirements or our recommendations. Then, the buyer confirms the final drawing list and pays the deposit for the formal order. Finally, we arrange for production.
• Q2. What is the delivery time?
  A: Equipment production takes 15-20 working days.
• Q3. How will the goods be transported?
  A: They can be shipped via DHL, UPS, FedEx, or TNT. sea freight are also available.
• Q4: Does your product come with a warranty?
  A: Yes, we offer a 1-year warranty on our products.