Shuoboda Instruments (Hunan) Co., Ltd.
| Payment Terms | ,L/C,T/T |
| Supply Ability | 500 sets/month |
| Delivery Time | 5~8 working days |
| Packaging Details | Plywood packing |
| Water evaporation | 5Kg / h |
| electric heating power | 18kw |
| inlet air temperature | 30 ~ 250 ° C (can be determined according to the nature of the material) |
| Outlet temperature | 60 ~ 90 ° C (can be determined according to the nature of the material) |
| temperature control accuracy | ±1 °C |
| Display | Color touch screen inverter control, high degree of automation |
| weight | 300KG |
| size | 1300 × 1100 × 2000 (mm) L x W x H |
| Brand Name | SHUOBODA |
| Model Number | SPD-H5 |
| Certification | ISO/CE |
| Place of Origin | China |
View Detail Information
Explore similar products
SPD-L1500 Low Temperature Spray Dryer Machine 500 - 2000ml/H
High Speed Centrifugal Pilot Scale Spray Dryer SPD-H Series
SPD-H10 High Speed Centrifugal Spray Dryer Equipment For Liquid Material
5L Inert Loop Lab Spray Dryer For Organic Solvents & Solution Recovery
Product Specification
| Payment Terms | ,L/C,T/T | Supply Ability | 500 sets/month |
| Delivery Time | 5~8 working days | Packaging Details | Plywood packing |
| Water evaporation | 5Kg / h | electric heating power | 18kw |
| inlet air temperature | 30 ~ 250 ° C (can be determined according to the nature of the material) | Outlet temperature | 60 ~ 90 ° C (can be determined according to the nature of the material) |
| temperature control accuracy | ±1 °C | Display | Color touch screen inverter control, high degree of automation |
| weight | 300KG | size | 1300 × 1100 × 2000 (mm) L x W x H |
| Brand Name | SHUOBODA | Model Number | SPD-H5 |
| Certification | ISO/CE | Place of Origin | China |
| High Light | Centrifugal Pilot Spray Dryer ，High Speed Pilot Spray Dryer ，Pilot Spray Dryer 5Kg/h | ||
Working principle of the equipment
SPD-H5 spray dryer is a drying equipment suitable for the liquid material with low temperature point and high viscosity, which has been improved several times on the basis of domestic and foreign spray dryers. The working principle is: cold air is filtered through the filter, then enters the heater, is heated to a certain temperature, and then enters the air distributor at the top of the spray tower, and the hot air spirally flows to the bottom of the tower. The liquid is pumped to the centrifugal atomizer at the top of the tower body, and the liquid is torn into extremely small mist droplets. The liquid droplets and the hot air are in parallel contact, and the heat exchange is fully performed. The water content is rapidly vaporized and evaporated, and dried in a very short time as a finished product. The finished product is separated by a cyclone and discharged, and the exhaust steam is discharged by an induced draft fan.
Features
1. The drying time of the equipment is short, the material is only 5 seconds from the entrance and exit, and the general active ingredients are not destroyed.
2. The spray tower has large diameter, can adapt to the drying of various materials, and the inlet air temperature can be adjusted, and the working range is wide.
3. The equipment is fully equipped to meet the requirements of the production process to the greatest extent.
4. Simple operation, wide adaptability, no need for professional operators.
5. The unique air inlet spiral distributor is the company's patent, which can ensure that the air volume is absolutely even down on the circumference of the tower body, and the material sticking wall is minimized.
6. Advanced and convenient cleaning door can facilitate the operation of the workers, and at the same time ensure absolute sealing, so that the material does not stick to the wall, and a cleaning door is arranged on the tower body to facilitate all-round cleaning.
7. The tower is absolutely mirror polished without any dead angle. One is to avoid sticking, and the other is to facilitate cleaning.
8. The inlet air temperature is controllable and can fully satisfy the drying process of the material.
9. All pipes and cyclones are equipped with a quick opening cleaning port.
10. The heater is changed into a U-tube form, which can overcome the defects of the weld cracking caused by the thermal expansion and contraction of the heating pipe. The U-shaped tube has an outer casing to avoid air leakage between the pipe and the tube plate. The fins are made of aluminum alloy, which improves the heat transfer coefficient and heat transfer efficiency.
Application
Technical parameters
Water evaporation: 5Kg / h
electric heating power: 18kw
inlet air temperature: 30 ~ 250 ° C (can be determined according to the nature of the material)
Outlet temperature: 60 ~ 90 ° C (can be determined according to the nature of the material)
Using touch screen inverter system control technology, heating temperature control accuracy: ±1 °C
Color touch screen inverter control, high degree of automation
weight: 300KG
size: 1300 × 1100 × 2000 (mm) L x W x H
Configuration
| NO. | Item Name | Specs | Material | Qty | Remark |
| Feeding system |
| ||||
| 1 | Peristaltic pump | --- | --- | 1pc | P=0.55KW |
| Hot air system |
| ||||
| 1 | air filter | --- | Frame is SUS304 | 1 set | Primary filter |
| 2 | air filter | --- | Frame is SUS304 | 1 set | Medium effect filter |
| 3 | Electric heating | --- | SUS304 | 1 set | P=18kw |
| 4 | Hot air duct | --- | SUS304, δ1.5 | 1 set | With insulation, matt treatment |
| 5 | Pipe flange | --- | SUS 304 |
| --- |
| Drying tower system |
| ||||
| 1 | Main tower | Diameter: φ0.8m | 304, δ2.0 | 1 set | Inner wall mirror polished, outer wall matt finish |
| 2 | Adjustable hot air distributor | --- | SUS304, δ2.0 | 1 set | mirror reflection |
| 3 | Variable spiral inlet vortex | --- | SUS304, δ3.0 | 1 set | mirror reflection |
| 4 | Electric high speed centrifugal atomizer | 1-5 | SUS304, alloy | 1 set | P=0.75kw frequency control |
| 5 | Vibrator | --- | SUS 304 | 1 pc | Manual |
| 6 | Clean up the inspection door | φ300mm | SUS 304 | 1 pc |
|
| 7 | Door handle | --- | SUS 304 | 1 set |
|
| Receiving system |
| ||||
| 1 | Primary cyclone separator | LT-280 | 304, δ2.0 | 1pc | Long cone, matt finish, with quick opening |
| 2 | Receiving bucket | --- | --- | 1pc | Transparent plastic bottle |
| 3 | Induced draft fan | 9-19-4A | Q235A | 1 set | P=2.2kw |
| 4 | Air duct | --- | 304, δ1.5 | 1 set | Matte processing |
| 5 | Exhaust pipe | --- | 304, δ1.5 | 1 set | --- |
| Control System |
| ||||
| 1 | Control cabinet is SUS304 stainless steel, color touch screen control (1) Inlet air temperature display, automatic control (2) Outlet temperature display (3) Feed amount control (4) Dynamic display of system operation process | --- | |||
| 2 | Nebulizer water cooling | --- | |||
Diagram
Machine show
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
1,000,000-10,000,000
Employee Number:
1~99
Ecer Certification：
Verified Supplier
Shuoboda Instruments Group as a professional manufacturer & supplier in China, we are committed to provides quality, user friendly and cost-effective products to our partner in all over the world. Our products mainly included Radiation Detection & Protection Equipment, laboratory scien... Shuoboda Instruments Group as a professional manufacturer & supplier in China, we are committed to provides quality, user friendly and cost-effective products to our partner in all over the world. Our products mainly included Radiation Detection & Protection Equipment, laboratory scien...
Get in touch with us
Leave a Message, we will call you back quickly!