Shuoboda Instruments (Hunan) Co., Ltd.
| Payment Terms | L/C,T/T |
| Supply Ability | 500 sets/month |
| Delivery Time | 5~8 working days |
| Packaging Details | Plywood packing |
| Diameter of drying tower | Φ1600mm |
| Height of drying tower | 4000mm |
| Water evaporation rate | 10-20Kg/h; |
| Inlet air temperature | 140℃-300℃ adjustable |
| Outlet air temperature | 75-120℃ |
| Heat source | Electrical heater, 36KW |
| Brand Name | SHUOBODA |
| Model Number | SPD-H10 |
| Certification | ISO/CE |
| Place of Origin | China |
View Detail Information
Explore similar products
SPD-L1500 Low Temperature Spray Dryer Machine 500 - 2000ml/H
High Speed Centrifugal Pilot Scale Spray Dryer SPD-H Series
High Speed Centrifugal Pilot Spray Dryer 5Kg/h SPD-H5
5L Inert Loop Lab Spray Dryer For Organic Solvents & Solution Recovery
Product Specification
| Payment Terms | L/C,T/T | Supply Ability | 500 sets/month |
| Delivery Time | 5~8 working days | Packaging Details | Plywood packing |
| Diameter of drying tower | Φ1600mm | Height of drying tower | 4000mm |
| Water evaporation rate | 10-20Kg/h; | Inlet air temperature | 140℃-300℃ adjustable |
| Outlet air temperature | 75-120℃ | Heat source | Electrical heater, 36KW |
| Brand Name | SHUOBODA | Model Number | SPD-H10 |
| Certification | ISO/CE | Place of Origin | China |
| High Light | High Speed Centrifugal Spray Dryer ，Liquid Centrifugal Spray Dryer ，Centrifugal Spray Dryer Equipment | ||
WORKING PRINCIPLE OF THE EQUIPMENT
SPD-H10 spray dryer is a drying equipment suitable for the liquid material with low temperature point and high viscosity, which has been improved several times on the basis of domestic and foreign spray dryers. The working principle is: cold air is filtered through the filter, then enters the heater, is heated to a certain temperature, and then enters the air distributor at the top of the spray tower, and the hot air spirally flows to the bottom of the tower. The liquid is pumped to the centrifugal atomizer at the top of the tower body, and the liquid is torn into extremely small mist droplets. The liquid droplets and the hot air are in parallel contact, and the heat exchange is fully performed. The water content is rapidly vaporized and evaporated, and dried in a very short time as a finished product. The finished product is separated by a cyclone and discharged, and the exhaust steam is discharged by an induced draft fan.
FEATURES
Application
EQUIPMENT PARAMETERS
Model: SPD-H10 High-Speed Centrifugal Spray Dryer
(Diameter of drying tower: Φ1600mm; Height of drying tower: 4000mm)
- Water evaporation rate: 10-20Kg/h;
- Inlet air temperature:140℃-300℃ adjustable;
- Outlet air temperature:75-120℃;
- For the atomizer
1. Model: R-XH-10
2. Power: 1.5KW
3. Disc diameter: Φ80mm
4. Rotation speed: 18000r/min
- Heat source: Electrical heater, 36KW
- PLC control, main electrical components brand is Schneider brand.
DETAILS SPECIFICATIONS
| Name | Spec. | Qty | Material | Remarks | |||
| Feeding system | |||||||
| Peristaltic pump | BT300 | 1unit | Health class | 300W | |||
| Feeding pipeline & valve | --- | 1set | Hygienic silica gel | --- | |||
| Circulating system | |||||||
| Blast fan | 9-19-3.15A | 1unit | Q235 | 1.1KW | |||
| Suction fan | 9-19-4.5A | 1unit | Q235 | 4KW | |||
| Hot air insulation pipeline | Inside: δ=2mm, Outside: δ=1.2mm | 1set | SUS304 | δ=50mm | |||
| Exhaust pipeline | δ=1.5mm | 1set | SUS304 | Quick | |||
| Pipeline connection | Flange or quick | 1set | SUS304 | --- | |||
| Air heating purification system | |||||||
| Pre & post-efficiency air filter | --- | 1set | Outside: SUS304 | Non-woven cloth | |||
| Electric heater | --- | 1set | SUS304 | 36KW | |||
| Main machine system | |||||||
| Drying room | D1600 H4000 | 1set | SUS304 Inside: 2mm Outside: 1.5 mm | Inside & outside: full weld. Top of tower: 3mm | |||
| Inlet air volute | Inside: δ=2.0mm, Outside: δ=1.5mm | 1set | SUS304 | --- | |||
| Hot air distributor | --- | 1set | SUS304 | --- | |||
| Atomizer | R-XH-10 | 1set | SUS304 | 1.5KW Frequency control | |||
| Lighting device | 100W | 1set | --- | --- | |||
| Viewing glasses | 610X510 | 1set | --- | --- | |||
| Cyclone separator | XF250,δ=2mm | 1set | SUS304 | --- | |||
| Bin | --- | 1pc. | SUS304 | --- | |||
| Controlling system | |||||||
| Control cabinet | --- | 1unit | Carbon steel spraying plastic | --- | |||
| Programmer | --- | 1unit | --- | --- | |||
| Temperature module | --- | 1set | --- | --- | |||
| Atomizer | 1set | --- | --- | ||||
| --- | 1set | --- | --- | ||||
| --- | 1set | --- | --- | ||||
| Other matching system | |||||||
| Ladder | 1set | SUS304 | --- | ||||
| Drying tower supporter | 1set | SUS304 | --- | ||||
LIST OF SPARE PARTS
| No. | Name | Spec. | Qty | Remarks |
| 1 | Viewing glass | Φ180 | 1pc. | --- |
| 2 | Hot relay | PT-100 | 1pc. | --- |
| 3 | Special tools for atomizer | SD-P10 | 1set | --- |
Diagram
Machine show
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
1,000,000-10,000,000
Employee Number:
1~99
Ecer Certification：
Verified Supplier
Shuoboda Instruments Group as a professional manufacturer & supplier in China, we are committed to provides quality, user friendly and cost-effective products to our partner in all over the world. Our products mainly included Radiation Detection & Protection Equipment, laboratory scien... Shuoboda Instruments Group as a professional manufacturer & supplier in China, we are committed to provides quality, user friendly and cost-effective products to our partner in all over the world. Our products mainly included Radiation Detection & Protection Equipment, laboratory scien...
Get in touch with us
Leave a Message, we will call you back quickly!