SKYLINE INSTRUMENTS CO.,LTD
| Payment Terms | T/T |
| Supply Ability | 1 set/week |
| Delivery Time | 3-5 work day |
| Packaging Details | Poly wooden case |
| Power supply | 220V,60Hz (Can Be Custom) |
| Warranty | 12 Months,1 Year,one year |
| Weight | About 13kg |
| Application | Children Toy,Children Product |
| Standards | EN71-1/ASTM F 963/16CFR1500.49/ISO 8124-1 |
| Capacity | 1.00lbf/1.35lbf/1.5lbf(Can customized) |
| Color | Gray and white,Grey |
| Dimension | 290x180x115mm |
| Brand Name | SKYLINE |
| Model Number | SL-S12 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
EN1888-2018 Children Products Irregular Surface Test Equipment For Baby Stroller
ISO 27668-1 Lab Testing Equipmen Ball Pen Writing Tester for Detect Ballpoint
SATRA TM21 Heel Continuous Impact Testing Machine for Test Plastic Heels
Spectacle Frame Tester PLC Control Hinge Cycle Tester US Voltage With Speed 0
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set/week |
| Delivery Time | 3-5 work day | Packaging Details | Poly wooden case |
| Power supply | 220V,60Hz (Can Be Custom) | Warranty | 12 Months,1 Year,one year |
| Weight | About 13kg | Application | Children Toy,Children Product |
| Standards | EN71-1/ASTM F 963/16CFR1500.49/ISO 8124-1 | Capacity | 1.00lbf/1.35lbf/1.5lbf(Can customized) |
| Color | Gray and white,Grey | Dimension | 290x180x115mm |
| Brand Name | SKYLINE | Model Number | SL-S12 |
| Certification | CE | Place of Origin | China |
| High Light | EN71-1 / ISO 8124-1 compliant Sharp Edge Testing Machine ，1.35LB capacity Toys Testing Equipment ，220V power supply EN71-1 Testing Machine | ||
Machine Introduction
Used to determine whether the edge of a toy or item is a sharp edge with an unreasonable risk of injury.
Product Information
To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
Test principle
The steel shaft used to simulate children's fingers needs to be hardened. The surface Rockwell hardness should be no less than 40, the surface roughness should not be greater than 0.40 microns, and the diameter should be 9.35 mm ± 0.12 mm. A layer of simulated artificial skin tape was applied perpendicularly to a steel shaft wrapped with simulated artificial skin glue with a force of 6 N (1.35 lb). The steel shaft was constant tangent at 23 mm/sec ± 4 mm/sec. The speed is rotated for one week. Check the edge of the test to cut (cut) the simulated artificial skin adhesive paper. If cut (cut), the tested edge is defined as a potentially dangerous sharp edge.
Sharp edge tester usage and judgment results
Specification
| Size | (L*W*H)29*19*10cm |
| Weight | 3.5Kg |
| Speed | 1.00±0.08 In/s |
| Fixed force | 1.35LB |
| Material | stainless steel |
| Accessories | Tiefo Long Tape PTFE Tape A set of foot switches, a power charger, an operating manual |
| Standard | ASTM F963 4.7, EN 71-1 8.11, 16 CFR 1500.49, ISO 8124-1 5.8, |
Technical Parameters
1.Diameter of rotary mandrel shown in table 1:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
|---|---|---|
| Nominal value | φ(9.53±0.12)mm | φ(0.375±0.005)inch |
| Measured value | φ9.450mm | φ0.3720 inch |
2.Measured value of force shown in table 2:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
|---|---|---|
| Nominal value | (6±0.5)N | 1.35 lbf |
| Measured value | 6.00N | 1.35 lbf |
3.Rotate speed of rotary mandrel shown in table 3:
| Standard | EN71-1 | ASTM F 963/16CFR1500.49 |
|---|---|---|
| Nominal value | (23±4)mm/s | (1.00±0.08)inch/s |
| Measured value | 19.3mm/s | 0.760inch/s |
4.Roughness of rotary mandrel shown in table 4:
| Standard | EN71-1 | ASTM F 963/CFR150.49 |
|---|---|---|
| Nominal value | ≤0.4 μm | ≤16 micro inch |
| Measured value | 0.15 μm | 5.9 micro inch |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Seller
Year Established:
2011
Total Annual:
120000-350000
Employee Number:
100~107
Ecer Certification：
Verified Supplier
SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service... SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service...
Get in touch with us
Leave a Message, we will call you back quickly!