ShenZhen ManLi Technology Co., LTD.
| Payment Terms | L/C,T/T,Western Union |
| Delivery Time | 35 working days |
| Packaging Details | Industrial Pakcage |
| Name | Lithium Ion Polymer Battery |
| Normal Capacity | 100mAh |
| Normal Voltage | 3.7V |
| Charging Voltage | 4.2 V |
| Dimension | 8.0 x 45.0 x 45.0 mm |
| Standard Charge Current | 0.5C (50 mA) |
| Internal Resistance | ≤ 500 mΩ |
| Charge Cut-off Current | 0.01C to 0.05C |
| Self-Discharge Rate | <3% per month |
| Model Number | 084545 100mAh 3.7v |
| Place of Origin | China |
View Detail Information
Explore similar products
3S 3830mAh 11.4V Drone Battery - High Power LiPo for FPV Quadcopters and Aerial
High-Energy 59.29Wh UAV Battery, 4S 15.4V 3850mAh LiPo for Professional Drones,
Reliable Wearable Power Solution: 2000mAh, 3.7V Ultra-Slim Cell with Long Cycle
3.7V 60Ah Lithium Pouch Battery Rechargeable NMC Pouch Cell
Product Specification
| Payment Terms | L/C,T/T,Western Union | Delivery Time | 35 working days |
| Packaging Details | Industrial Pakcage | Name | Lithium Ion Polymer Battery |
| Normal Capacity | 100mAh | Normal Voltage | 3.7V |
| Charging Voltage | 4.2 V | Dimension | 8.0 x 45.0 x 45.0 mm |
| Standard Charge Current | 0.5C (50 mA) | Internal Resistance | ≤ 500 mΩ |
| Charge Cut-off Current | 0.01C to 0.05C | Self-Discharge Rate | <3% per month |
| Model Number | 084545 100mAh 3.7v | Place of Origin | China |
| High Light | 100mAh 3.7V rechargeable lithium battery ，ultra-slim 8mm pouch cell battery ，wearable sensor rechargeable battery | ||
Features
Ultra-Compact & Lightweight: The 8x45x45mm form factor and pouch construction provide maximum design flexibility for extremely space-limited applications, contributing minimal weight.
Stable Low-Power Output: Optimized for consistent, long-term micro-current discharge, perfect for devices with sleep or standby modes.
Enhanced Safety (Pouch Design): The soft aluminum-laminate pouch construction reduces the risk of leakage and mitigates the potential for violent failure modes compared to some metal-cased cells.
Specification
| Normal Capacity | 100mAh |
| Normal Voltage | 3.7V |
| Charging Voltage | 4.2 V |
| Dimension | 8.0 x 45.0 x 45.0 mm |
| Standard Charge Current | 0.5C (50 mA) |
| Charge Cut-off Current | 0.01C to 0.05C |
| Discharge Cut-off Voltage | 3.0 V |
| Internal Resistance | ≤ 500 mΩ |
|
Max. Continuous Discharge Current |
0.5C (50 mA) |
| Operation Teerature |
Charge:0°C to +45°C
Discharge:-10°C to +60°C |
| Storage Temperature | -20°C to +25°C |
| Self-Discharge Rate | <3% per month |
Applications
Miniature Wearables & Hearables: Advanced hearing aid modules, ultra-small Bluetooth earphone charging cases, smart rings.
Medical & Health Monitors: Small disposable or reusable skin patch sensors, compact medical alert devices.
Micro IoT & Sensor Nodes: Environmental sensors, asset tracking tags (with low update rates), smart cards, and electronic shelf labels.
Micro Toys & Gadgets: Tiny remote-controlled devices, mini drones (for non-motor auxiliary power), novelty electronics.
Warnings & Safety Instructions
Chrging
Mandatory Charging Control: ALWAYS use a dedicated, precision Li-ion/Li-Po charger IC or circuit designed for the exact charge voltage (4.20V or 4.35V) and tiny charge currents (e.g., 50mA) required.
Voltage Accuracy: Overcharging by even a few tenths of a volt can cause catastrophic failure in such small cells.
Never Trickle Charge: Do not apply a continuous maintenance/trickle charge after the CV cycle is complete.
Discharging
Prevent Deep Discharge: Never allow the cell voltage to fall below 3.0V under load. Implement a hardware or software lock in your device to shut down at or above this voltage.
Current Limit: Strictly adhere to the maximum continuous discharge current. Exceeding it will cause rapid voltage drop, overheating, and damage.
No High-Pulse Loads: This cell is not designed for applications requiring high pulse currents (e.g., motor starting, camera flashes).
Storage
Mechanical Protection: The pouch is easily punctured. Never apply sharp pressure, bend, or crease the cell. Provide adequate mechanical support in the device housing.
Terminal Connection: Soldering directly to the cell tabs is FORBIDDEN unless explicitly approved by the manufacturer. The heat can damage the internal seal. Use spot welding or manufacturer-recommended conductive adhesive.
Storage: For any storage exceeding one week, condition the cell to 3.7V - 3.8V and store in a cool, dry environment.
Company Details
Business Type:
Manufacturer
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Shenzhen Manli Technology Co., Ltd. is a high-tech manufacturing enterprise specializing in the R&D, production, and sales of lithium batteries.The product portfolio encompasses a wide range of battery types, including high-capacity, low self-discharge, power-type, and high/low-temperature varia... Shenzhen Manli Technology Co., Ltd. is a high-tech manufacturing enterprise specializing in the R&D, production, and sales of lithium batteries.The product portfolio encompasses a wide range of battery types, including high-capacity, low self-discharge, power-type, and high/low-temperature varia...
Get in touch with us
Leave a Message, we will call you back quickly!