China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Opening Time About 7 seconds
Temperature Range -25°C to +72°C
Door Mass Supported Up to 38 kg
Rated Force 570 N per actuator
Supply Ability 2000 Sets per Month
Set Weight 6.2 kg per set
Sealing IP64 actuator and plug
Cycle Life 44,000 open and close cycles
Packaging Details Printed carton with shaped foam, single carton 79x22x20 cm, 2 sets per export carton
Protection Features Anti pinch stop, over current cut, 15A fuse
Delivery Time 5-12 working days after payment
Payment Terms T/T,Western Union,L/C,MoneyGram
Voltage 12V DC
Bracket Material Steel bracket, black paint
Place of Origin Guangdong, China
Model Number for Haval M6 2017-2019
Certification ISO 9001:2015
Brand Name Liush

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Opening Time About 7 seconds Temperature Range -25°C to +72°C
Door Mass Supported Up to 38 kg Rated Force 570 N per actuator
Supply Ability 2000 Sets per Month Set Weight 6.2 kg per set
Sealing IP64 actuator and plug Cycle Life 44,000 open and close cycles
Packaging Details Printed carton with shaped foam, single carton 79x22x20 cm, 2 sets per export carton Protection Features Anti pinch stop, over current cut, 15A fuse
Delivery Time 5-12 working days after payment Payment Terms T/T,Western Union,L/C,MoneyGram
Voltage 12V DC Bracket Material Steel bracket, black paint
Place of Origin Guangdong, China Model Number for Haval M6 2017-2019
Certification ISO 9001:2015 Brand Name Liush
High Light Electric Rear Door Lift Kit ,Automatic Trunk Lifter System ,Car Electric Trunk Actuator

Electric Trunk Drive Back Door for the Haval M6 2017-2019

Remote control power tail door lift gate open retrofit · value line SUV

Bolt on fitRemote key control18-month warranty

The Haval M6 built from 2017 to 2019 was aimed at families who wanted H6 space at a lower price, and it became a volume seller in Russia, South America and North Africa. Under the value trim, though, the tail door is still a heavy steel panel on plain gas struts, and the door is used constantly for school runs, market loading and airport pick ups. A tired strut means the panel drops on the shoulder, and in winter the lift becomes a two person job.

This kit swaps the two struts for motorised actuators that use the original ball studs and hinge points, adds a compact controller behind the rear trim and connects to the factory wiring with matching plugs. No drilling, no welding, no cutting of the original harness, and the car can be returned to stock in under an hour if needed.

Features that move stock

01Electric rear door lift kit with matched forceActuators deliver 570 N each and are set for the M6 panel mass of up to 38 kg, so the door climbs at a constant rate and does not stall halfway with an empty boot or sag with a full one.
02Automatic trunk lifter system on the factory remoteA long press on the original key opens the door and a second long press closes it. The rear handle button stays live as an electric trigger, so the owner keeps one key and learns nothing new.
03Car electric trunk actuator with safety cut outThe controller watches motor current, reverses the panel if it meets an obstacle, and stops the motor on over current. The opening height can be stored for garages and low shelters.

Fitment and supplied parts

ModelHaval M6, model years 2017 to 2019
Body noteM6 tail door and strut studs are specific to this model, H6 parts do not interchange
Supplied2 motorised actuators, controller, harness, ball stud adaptors, cabin switch, fastener bag, printed guide
Fit timeAround 1.5 hours with sockets and a trim lever

Technical data

ItemValue
Actuator typeMotorised tail door actuator pair
Force per actuator570 N
Door mass supportedUp to 38 kg
Supply voltage12V DC, negative ground
Full open timeAbout 7 seconds
Working temperature-25°C to +72°C
Design life44,000 open and close cycles
SealingIP64 actuator and plug
Control inputsRemote key, rear handle button, cabin switch
SafetyAnti pinch stop, over current cut, 15A fuse
Bracket finishSteel bracket, black paint
Set weight6.2 kg per set

Fitting guide

  • Hold the tail door open and unclip the original struts from their ball studs, keeping the parts in the car.
  • Screw the ball stud adaptors on and mount the motorised actuators in the same position as the struts.
  • Feed the harness through the tail gate grommet next to the factory loom and plug in the controller.
  • Fit the cabin switch, store the opening height, cycle the door twice and confirm the pinch stop works.
Export M6 units of 2017 and early 2018 sometimes use a shorter tail gate harness and a different trim clip. Send the model year and a photo of the open door before dispatch so we pack the correct variant. Left and right hand drive builds are both supported.

Packing and commercial terms

Each set is packed in a printed carton with shaped foam, single carton 79x22x20 cm, two sets to an export carton, fasteners separated by mounting position and an English, Russian or Spanish guide included. Every set is cycled on the bench and checked for force, current draw and pinch response before sealing. Distributors can order neutral cartons, private label printing, own part numbers and translated manuals; actuators, controllers and switches are kept in stock so a warranty claim is closed without a long wait.

Send the model year, drive side and order quantity, and we will confirm the M6 variant, the wholesale band at 150-230 US dollars per set and the earliest shipping date.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement