Shenzhen Liush Auto Parts Co.,Ltd
| Payment Terms | T/T,L/C,PayPal |
| Stroke Time | 6-7 seconds |
| Working Temperature | -35 C to +80 C |
| Breakaway Torque | 45 kg class |
| Supply Ability | 4000 Sets per Month |
| Supply Voltage | 12V DC |
| Housing Rating | IP56 |
| Bench Test | 500 cycles |
| Delivery Time | 8-18 Working Days |
| Idle Consumption | 2.5 mA |
| Kit Weight | 7.2 kg |
| Packaging Details | Printed box with EVA foam inserts, five-ply export carton 77x23x19 cm with corner reinforcement, two-set master carton 79x40x21 cm |
| Actuation | Two electric lift actuators |
| Sensor Type | Capacitive kick sensor |
| Brand Name | Liush |
| Model Number | for Peugeot 3008 P64 |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Electric Middle Sliding Door Remote Control For Citroen Jumpy SpaceTourer
Power Tailgate Conversion Kit Trunk Lift Gate System Retrofit Electric Tailgate
Aftermarket Power Tailgate Retrofit Electric Trunk Lift Kit for Peugeot 2008 A94
Automatic Foot Sensor Tail Gate Lift Assist Trunk Opener Closer Kit for Peugeot
Product Specification
| Payment Terms | T/T,L/C,PayPal | Stroke Time | 6-7 seconds |
| Working Temperature | -35 C to +80 C | Breakaway Torque | 45 kg class |
| Supply Ability | 4000 Sets per Month | Supply Voltage | 12V DC |
| Housing Rating | IP56 | Bench Test | 500 cycles |
| Delivery Time | 8-18 Working Days | Idle Consumption | 2.5 mA |
| Kit Weight | 7.2 kg | Packaging Details | Printed box with EVA foam inserts, five-ply export carton 77x23x19 cm with corner reinforcement, two-set master carton 79x40x21 cm |
| Actuation | Two electric lift actuators | Sensor Type | Capacitive kick sensor |
| Brand Name | Liush | Model Number | for Peugeot 3008 P64 |
| Place of Origin | Guangdong, China | Certification | ISO 9001:2015 |
| High Light | Electric Tailgate Kit Soft Close ，Automatic Trunk Opener Kick Activated ，Car Electric Trunk Back Door | ||
A 2025-specification power back door kit engineered for the second-generation Peugeot 3008 (P64). The set contains two motorised lift actuators, a CAN-aware control unit, a complete plug-in harness and model-specific brackets, and it mounts onto the factory strut studs so the original hatch geometry is preserved. Because the P64 tailgate is aluminium-faced and heavier than earlier Peugeot hatches, the actuators are tuned with a higher breakaway torque so the door starts moving smoothly from the fully closed position instead of stalling on the latch.
| Parameter | Value |
|---|---|
| Suitable Model | Peugeot 3008 P64, 2016-2023 |
| Supply Voltage | 12V DC |
| Actuation | Two electric lift actuators, ball-socket ends |
| Breakaway Torque | Designed for aluminium tailgate, 45 kg class |
| Stroke Time | 6-7 seconds |
| Inputs | Key remote, cabin switch, hatch switch, foot sensor (optional) |
| Safety | Hall position sensing plus current-based reversal |
| Sensor Type | Capacitive kick sensor with rain and splash filter |
| Housing Rating | IP56 |
| Working Temperature | -35 C to +80 C |
| Idle Consumption | 2.5 mA in sleep state |
| Kit Weight | 7.2 kg |
Installation is a plug-in retrofit: remove the rear trim, swap the gas struts for the motorised actuators, route the supplied harness along the factory loom path, and terminate the fused power lead at the battery junction box. No body cutting is involved and the original struts can be refitted when the vehicle is returned to stock condition. Typical labour is 2 hours for a technician unfamiliar with the model and under an hour for a repeat fit; a printed guide plus a QR-linked video cover the P64 trim clips and the sensor calibration steps.
Accessory distributors with strong Peugeot coverage in France, Belgium, Turkey and North Africa; online shops targeting SUV owners upgrading boot convenience; leasing companies and corporate fleets running 3008 crossovers that need faster loading cycles; and installers doing mobile fitment at customer sites. Since the P64 shares its platform with several Stellantis models, the same fitting skill set transfers across a broader accessory range.
Each set is packed in a printed box with EVA foam inserts, then in a five-ply export carton with corner reinforcement. Every unit is cycle-tested 500 times on the bench before packing, with checks on stroke time, sleep current, sensor response and reversal force. The line is ISO 9001:2015 certified; warranty is 24 months, and actuators, sensors and control units are available as individual service parts for after-sales support.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!