Zhaga book 18 High Bay Sensor, Daylight Priority Function With 15m Max Mounting

Product Specification

【Product Feature】

• Patented low impedance planar antenna; High-gain
• Match Zhaga Book 18 base, plug in design
• 15m maximum installation height, suitable for most warehouses
• With mini sensor detector, which is suitable for high bay light
• Low transmitting power, no harm to human
• Support Remote Control to adjust parameters
• Newly patent design sensor antenna with two detection mode: high sensitivity detection and interference immunity detection. (suitable for installation environments with many metal reflective surfaces)
• Not affected by temperature, humidity, noise, dust etc.

【Parameter】

【Function】

【Product Information】

• Dimension (Unit:mm)

• Wiring,Function

【Installation Instruction】

【Detection Range】

【Retome Controller】

【Initialization】

• Switch function / 3-step dimming function: the light will be turned on 100% brightness by the initial energizing sensor, and will be turned off after 10 seconds. During initialization, no external motion sensing signal will be detected.
• Two-phase dimming function: the light will turn on 100% brightness in the initial energizing sensor, and turn to low brightness 10 seconds later (the brightness set by stand-by dim level). During initialization, no external motion sensing signal will be detected.

【Default Setting】

• Sensor should be installed by a professional electrician. Please turn off power before installing, wiring.
• Microwaves cannot penetrate metal. Do not place product in a closed or a half-closed metal lamp. Neither metal nor glass is not allowed to cover above the product. If antenna needs to pass through the metal plate, please ensure that the top of sensor is close to the metal plate.
• Sensitivity area is related to moving speed of objects, size of moving objects, mounting height, mounting angle, working environment, reflecting materials and etc.. Given detecting area is typical value that was measured by 165cm high testers in an indoor open environment.
• The detection distance of the sensor in the wall installation will be greatly increased compared with that in the ceiling installation. If wall installation is used, please reduce the sensitivity or contact us to confirm the use settings. The daylight thresholds are measured on a sunny day without shadow and in an ambient light diffuse reflection status. Different environment and climate cause different brightness values that daylight sensor measures.
• Sensor parameters may need to be reconfigured in different installation environments, please refer to the following instructions or contact the manufacturer
• The installation spacing between sensors is recommended to be greater than 3m, and the installation spacing between sensors and routers is recommended to be greater than 2m.
• The installation height of the sensor product cannot exceed 15 meters, and the optimal height is 12 meters.
• Sensor is for indoor use only. The waterproof effect for outdoor or half-outdoor use will be affected. Wind, rain, and moving objects may cause false triggering.
• Vibration signals will be regarded as moving signals to trigger sensor. Installing sensor should be away from the object that vibrates for a long time, such as large metal equipment, pipes, air conditioning outlets, exhaust vents, smoke exhaust machine ports, shaking fans, etc. Pets in detecting area may cause false trigger.
• The antenna surface of microwave module should be away from input AC, output DC, rectifier bridge, transformer, switch tube and other high-power devices to avoid high frequency signals affecting the normal operation of microwave sensor’s antenna.
• Sensor with different 0-10V driver, low light effect may be different
• DC regulated power supply with stable output voltage and low ripple coefficient must be used. The ripple of the power supply should be less than 100mV ; the load current should be greater than 50 mA
• For the new installation environment, it is recommended to first install and test 5pcs prototypes before bulk installation.