6‑Axis Large CNC Glue Dispenser — Cabinet Equipment for FPC & Epoxy Resin

Product Specification

Product overview

This system combines a rigid gantry, an articulated rotation head, several independently controllable dispensing units and an integrated camera for part registration and inspection. It accepts cartridge or heated feed, supports different actuator control modes, and stores production recipes for repeatable runs. The machine is intended for inline conveyor cells and indexed production.

Problem → Cause → Solution

Problem: Large panels and flexible circuits require accurate glue deposits on multiple faces; inconsistent deposits lead to rework and yield loss.
Cause: Limited head orientation, unstable material temperature and lack of accurate part registration cause volume and placement variance.
Solution: The 6‑axis rotation head provides full access to part surfaces; camera registration corrects part position; stable feed temperature and independently controlled dispensing heads deliver repeatable deposit size and position. Save validated recipes for repeatable production.

Technical parameters

Applications

• FPC and FFC adhesive dots, dispensing and sealing for display and connector assemblies.
• Epoxy resin dispensing for modules and sensors.
• Multi‑face dispensing on curved or complex parts without re‑fixturing.

How it works 

1. Material load: install cartridge or connect heated feed and set temperature.
2. Recipe & camera registration: load recipe from operator or factory system; camera locates part features and adjusts motion.
3. Dispense cycle: gantry and rotation head position dispensing heads at required angles and apply deposits per recipe.
4. Inspection & logging: camera verifies deposit size and position; process data logged for traceability.

How to choose 

• Part geometry: choose 6‑axis rotation when parts need multi‑side access or have steep angles.
• Deposit size & material: for very small deposits confirm actuator resolution and tip size; for filled resins use heated feed and larger tips.
• Throughput: increase number of dispensing heads to raise production rate; request measured cycle time with your pattern.
• Integration: confirm required factory interfaces and conveyor signals.

Installation & maintenance

Installation: floor‑mounted inline cell; connect mains, compressed air, conveyor I/O and network; ensure safe grounding.
Commissioning: run material × tip × temperature × motion tests to create validated recipes.
Maintenance: daily tip cleaning on heavy lines; scheduled actuator checks and monthly camera calibration.

FAQ

Q: What minimum deposit can this system make?
A: Typical minimum volume ≥0.01 μL depending on tip and material—confirm with a sample test.
Q: Can the rotation head access undercuts or angled faces?
A: Yes—the 360° rotation head positions the tip at the required angle so the part does not need repositioning.
Q: Is camera registration included?
A: Yes—camera registration is standard for part alignment; optional 3D inspection is available.
Q: Which materials can it handle?
A: Designed for hot‑melt, UV and epoxy resins; for filled resins use heated feed and confirm compatibility in a pilot.

About Mingseal

Founded in 2008, Changzhou Mingseal Robot Technology Co., Ltd. is a technology-driven manufacturer of high-end equipment, specializing in connection, assembly, inspection systems, and key components for advanced semiconductor packaging and precision electronics. Our solutions are widely adopted by leading customers in sectors such as semiconductor packaging, consumer electronics, and automotive electronics. With a strong presence across Asia and the Americas, we deliver reliable support and innovation globally.

Partner with Mingseal to power the future of automatic manufacturing!