API 5CT Oilfield Downhole Tools Large Diameter Oil Well OCTG Casing Pipe

Product Specification

Oil casing pipe is a large-diameter steel pipe used to support the walls of oil and gas wells after drilling is complete. Unlike tubing or drill pipe — which can be retrieved and reused — casing is a permanent, single-use material. It is run into the borehole and cemented in place to provide long-term structural integrity. In fact, casing accounts for more than 70% of all oil well pipe consumption, making it the single largest tubular component in any well construction program.

Once the casing is cemented, it stabilises the wellbore, isolates different underground formations, prevents the well from collapsing, and creates a secure pathway for drilling mud circulation during drilling and for production tubing during the later life of the well.

Casing Functions – Why It Is Essential

Oil casing serves multiple critical functions throughout the life of a well:

Wellbore stability – Prevents the hole from caving in, especially when drilling through unconsolidated or fractured formations.

Formation isolation – Seals off different pressure zones, salt layers, unstable shales, and high-pressure pockets, preventing cross-flow between formations. 

Groundwater protection – Isolates freshwater aquifers from produced fluids and drilling muds, a key environmental safety requirement.

Pressure containment – Provides a high-pressure barrier for blowout preventer (BOP) systems and well-control equipment.

Production conduit – The production casing string houses the tubing through which oil and gas flow to the surface.

Casing Classification by Function – The Five Strings

Oil and gas wells typically use multiple concentric casing strings, each with a specific function, size, and depth range. The exact number of strings depends on well depth, geological conditions, and regulatory requirements.

Selection note: Conductor and surface casing strings are typically J55 or K55 grade. Production casing for deeper wells uses N80, P110, or Q125. For wells containing hydrogen sulfide (H₂S), always specify L80 or higher sour-service grades.

Key Specifications (API 5CT / ISO 11960)

Standard: API SPEC 5CT / ISO 11960

Size Range: 4½″ – 20″ (114.3 mm – 508 mm) outer diameter

Grades Available: H40, J55, K55, N80 (all types), L80 (all types), C90, T95, P110, Q125, V150, plus corrosion-resistant alloys (13Cr-80/110, 28Cr-80/110)

Thread Connections: STC (Short Round Thread), LTC (Long Round Thread), BTC (Buttress Thread), plus premium connections (VAM®, VAM TOP®, NEW VAM, TPCO)

Length Ranges:

R1: 4.88 m – 7.62 m (16 ft – 25 ft)

R2: 7.62 m – 10.36 m (25 ft – 34 ft)

R3: 10.36 m – 14.63 m (34 ft – 48 ft)

Processing Forms: Short round thread, long round thread, partial trapezoid thread (BTC), special clearances, and premium connections

Steel Grade Selection – Matching Grade to Well Conditions

API 5CT casing grades define yield strength, tensile strength, and suitability for corrosive environments. Higher grades offer greater collapse resistance and deeper well capability.

Critical safety note: J55, N80, and P110 are NOT suitable for sour service (H₂S present). They lack the required hardness control and will fail by sulfide stress cracking (SSC). If H₂S partial pressure exceeds 0.05 bar, always specify L80-1 or higher sour-service grades.

Thread Connection Types – Understanding API Connections

API 5CT casing connections are critical to sealing performance, load capacity, and well integrity. Here is how the standard options compare:

Beyond API standard threads, premium connections (such as VAM®, VAM TOP®, NEW VAM, and TPCO proprietary designs) offer enhanced performance:

Metal-to-metal seal for superior gas tightness

Reverse angle torque shoulder for precise make-up control

Higher torque capacity for deviated and horizontal wells

ISO 13679 CAL-IV qualification for critical service

Recommended for HPHT wells, gas wells, and sour service

Casing Dimensions & Weight Table

How to Select the Right Oil Casing?

Selecting casing requires balancing well design parameters with budget and availability. Use this checklist:

 Well depth and pressure – Deeper, higher-pressure wells require higher strength grades (P110, Q125, V150).

 Corrosive environment – Determine whether H₂S (sour) or CO₂ (sweet) is present.

H₂S (sour): L80-1 minimum; C90 or T95 for deeper sour wells.

 CO₂ (sweet): 13Cr grades for moderate CO₂; consider duplex stainless for severe CO₂.

 Both H₂S and CO₂: Premium connections + CRA (corrosion-resistant alloy) grades.

 Connection type – STC for shallow, low-load wells; LTC for general service; BTC for deep/high-load wells; premium connections for HPHT, gas wells, or deviated holes.

 Product Specification Level (PSL) – API 5CT defines PSL-1 (standard) and PSL-2 (tougher chemistry, impact testing, NDT). PSL-2 is typically required for sour service, offshore, and critical wells, but adds 5–15% to cost.

 Length range – R3 (longest) minimizes the number of connections per well but requires larger handling and transport equipment. R1 and R2 are more common for most drilling programs.

 End finish – Specify threaded and coupled (T&C) with coupling, or plain end with bevel for welding.

Why Partner with Sunrise for Oil Casing?

As a specialized trading company with strong, long-standing factory partnerships, Sunrise offers:

API 5CT certified material – Full traceability with mill test certificates (MTC) for every joint.

 Complete grade coverage – From H40 to high-alloy 28Cr grades, in stock or custom-ordered.

 Flexible length options – R1, R2, or R3 to match your well design and transport constraints.

 Full thread portfolio – STC, LTC, BTC, and premium connections (VAM, VAM TOP, NEW VAM, TPCO).

 Sour-service and CRA supply – L80, C90, T95, 13Cr, and 28Cr grades available with NACE MR0175 compliance.

 Global logistics support – Export documentation, sea/air freight, and on-site delivery, even to remote drilling locations.

 Technical assistance – Not sure which grade or connection suits your well? We help you specify correctly, avoiding costly mis-selection.

Contact us to order API 5CT oil casing for your drilling, completion, or workover project. We supply the right grade, connection, length, and quantity for your specific well conditions — with full compliance and on-time delivery.