China factories

China factory - Shenzhen ENM Eletronic Technology Co.,Ltd

Shenzhen ENM Eletronic Technology Co.,Ltd

  • China,Shenzhen ,Guangdong
  • Active Member

Leave a Message

we will call you back quickly!

Submit Requirement

About Us

Products

Shenzhen ENM Eletronic Technology Co.,Ltd

Shenzhen ENM Eletronic is specialized in led road & area luminaires over several years, we are a mature led lighting manufacturer since 2010 year, Currently there are four laboratories: optics, material structure, electronic project, and heat transfer etc.

  • China Factory - Shenzhen ENM Eletronic Technology Co.,Ltd
  • China Factory - Shenzhen ENM Eletronic Technology Co.,Ltd
  • China Factory - Shenzhen ENM Eletronic Technology Co.,Ltd
  • China Factory - Shenzhen ENM Eletronic Technology Co.,Ltd
  • China Factory - Shenzhen ENM Eletronic Technology Co.,Ltd

Basic Information

Company Name: Shenzhen ENM Eletronic Technology Co.,Ltd
Business Type: Manufacturer
Brands: ENM Eletronic
Employee Number: 80~100
Year Established: 2019
Total Sales Annual: 500000-800000
Company Location: No.6 Building, Sanlian Industrial Park, Songbai Road, Shiyan Town, Bao’an District, Shenzhen City, Guangdong Province, China
Factory Location: No.6 Building, Sanlian Industrial Park, Songbai Road, Shiyan Town, Bao’an District, Shenzhen City, Guangdong Province, China

Trade & Market

Company slogan:

ENM Eletronic, Smart Lighting, Smart City!

OEM Overview:

We have the experience and capabilities needed to help customers reduce their time to market, scale up manufacturing capacity and develop environmental monitoring systems and sensors for their instrumentation. We provide original OEM and ODM services for many European marketing distributors, we free offer technical support for different lighting projects

Some of these companies chose us after a series of tests carried out at their headquarters and we were chosen for our experience in the world of LED lighting.

We have excellent quality-price service.

If necessary we are at your complete disposal for any questions or quotations.

Production Line:

R&D:

We do the performance tested and torture tested.

This spectroradiometer is for testing the light output of an individual LED chip.

In the salt spray test chamber, we test the aluminum components. Every piece of aluminum is tested for corrosion. One day in salt spray machine is equivalent to 6 months in the real world.

The constant temperature & humidity chamber is allowed to control the humidity. It can stimulate environments from negative 20 degrees right up at 50° C and humidity levels from 0 to 99%.

To test the light output of a led headlight bulb, we use another computer controlled integrating sphere. This one is 1.5 meters in diameter. Put the light bar in, close it up, and we get a highly accurate lumens rating.

For the UV tester, we put individual components in it to ensure that they gonna last in a tough sun irradiance. Each component is tested for its fade, its aging and potential crocking. The component will stay in the UV tester for 2 months, if they don’t pass the test, we will send back to the engineer for re-develop, re-design, new material, new coating, and then re-testing.


As a led headlight bulb is made, it’s also tested for an ip67 rating. This is the water-proof test chamber that actually pressure rises and then create a vacuum inside the housing to test for any leaks.


When designing the light distribution of the led headlight, we will use the light beam pattern test system and its optical design software. In the front of the test system, it is a dark room with 180 degrees of measurable space. We can accurately record the light spread and the lux on the wall and ground when we turn on the headlight. So we can improve at lumens and lux output of the led headlight for better performance and light beam pattern.

Our Team:

There is/are 5 - 10 People R&D Engineer(s) in the company.

Service:

Please kindly check the product instruction in cartons, if any quality or technical questions, please feel free to contact with us.
The warranty of our product is 5 years, if any quality problem during the warranty, please take pictures to admin@opto-shine.com, we will send new products to you for free.

Warning
a. Make sure that the manual instructions are provided to installers and users ;
b. Please cut off the power while installation or reparations.
c. Not installed properly may cause lighting fall down, please follow the instructions.
d. Do not touch the light source while it is on.
e. Replace any cracked protective cover;
f. Outdoor lighting fixtures only.

Tools you need / Accessories
Stripper : for stripping wire insulation
Screwdriver - (3mm): used to connect the power cord
Allen wrench(8mm) A / F - Connections and adjustments for lamps and mounting rod

Lighting installation
1. Connect power cord : insert the power cord from the lamp body ,connect the cable through waterproof connector(connect L to L, N to N, E to grounding wire) , tighten waterproof connector screws discharge and pressure , the wiring is completed ;
2 tightly cover, fastening buckle
3 pole bracket adjustment , the fixture into the pole , tightening three set screws by hex wrench in sequence.
4. The luminaire can not be adjusted after installation.

Note
1 ) with the required two operations ;
2) Under no circumstances , tighten the set screw torque must not be exceeded 16N.m prevent structural failure resulting in injury ;
3 ) shall be preset at least 18AWG cables inside poles .

Maintenance / replacement lamps
In order to maintain the high efficiency of the lens hood should be cleaned regularly , the specific frequency should be based on local conditions. Need to use a mild soap or neutral, non- abrasive ingredients and does not contain chlorides or aromatic cleaning agent (PH value between 6-8 ) . Should be thoroughly cleaned with a soft cloth or brush when necessary. Need to use clean cold water, then wipe dry.
If necessary, check and replace any damaged lens cover or seal.
If you check discovered light is off, the flash or cycle to deal with faulty parts replaced. Separate order replacement parts, please contact the manufacturer for repair .

Warning
Please note that a consistent source type , power and lighting product label and package insert .
If the light just after the operation , use isopropyl alcohol to remove light on the fingerprint , oil and so on. Avoid these substances cause white spots and cause premature lamp failure. Use a clean cotton cloth or light carefully clean.

Factory Information

Market name: North America,South America,Western Europe,Eastern Europe,Eastern Asia,Southeast Asia,Middle East,Africa,Oceania,Worldwide
Contact Person: Ms Kellyxia

Explore more categories

  1. China UFO LED high bay

    UFO LED high bay

    10 products available

  2. China LED linear pendant light

    LED linear pendant light

    5 products available

  3. China LED troffer panel light

    LED troffer panel light

    6 products available

  4. China LED down light

    LED down light

    7 products available

  5. China LED batten triproof light

    LED batten triproof light

    5 products available

  6. View All Categories

Get in touch with us

  • Reach Us
  • Shenzhen ENM Eletronic Technology Co.,Ltd
  • No.6 Building, Sanlian Industrial Park, Songbai Road, Shiyan Town, Bao’an District, Shenzhen City, Guangdong Province, China
  • MsKellyxia
  • 15816421796
  • https://kelly2014.ecer.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement