We deliver flexible, application-driven OEM & ODM solutions tailored to your unique lighting project scenarios. Our vertical in-house production chain enables us to customize every core parameter of LED light strips from the ground up — starting from LED chip size, bead dimension, IC communication protocol, all the way to finished strip dimensions, LED quantity per meter, working voltage, brightness level, color output, waterproof rating, as well as custom logo packaging and other fine details.

We listen closely to your application requirements, whether for architectural lighting, hotel decoration, cabinet lighting, signage neon, stage lighting, amusement installations or landscape engineering. Our systematic custom workflow covers every stage: requirement communication, technical feasibility evaluation, preliminary quotation, prototype sampling, trial production, formal mass manufacturing and targeted cost optimization.

Beyond LED strips themselves, we also support one-stop integration of matching accessories including power supplies, controllers and wiring harnesses. Instead of you sourcing components separately, we combine all required parts into a complete, ready-to-use lighting set to simplify your procurement and project installation.

Customization Scope

✅ LED Source Customization: Custom LED chip size, bead outline dimension, color bin, brightness grade and luminous color

✅ Intelligent Control Customization: Custom IC models, communication protocols, pixel addressing modes and dynamic lighting effects

✅ Light Strip Parameter Customization: Custom strip width/length, LED quantity per meter, working voltage (12V/24V/48V etc.), CRI, color temperature

✅ Protection Customization: Custom waterproof grades (IP20, IP65, IP67, IP68), extrusion silicone formula and anti-UV performance for indoor or outdoor environments 

✅ Brand & Packaging Customization: Laser marking, printed logo, custom labels, polybags, color boxes and outer cartons with your brand identity

✅ Accessory Integration: Matching power adapters, signal controllers, amplifiers, connectors and pre-wired harnesses for a complete system

Our Custom Service Workflow

1. In-depth requirement discussion: Understand your application environment, performance expectations and target budget
2. Technical review & feasibility assessment by our engineering team
3. Preliminary quotation with multiple options for cost balancing
4. Prototype sampling for function, light effect and reliability verification
5. Trial production to validate stability before bulk order
6. Mass production with full-process QC and mandatory burn-in aging
7. Strict final inspection and consolidated shipment including supporting accessories

We assign a dedicated project engineer for each custom order to keep consistent communication throughout the whole cycle. We help you balance performance, quality and cost to fit your market positioning. Whether you need minor modifications based on our standard models or a fully new custom lighting solution developed for your specific project, we are your reliable one-stop LED strip manufacturer.

LED Strip & Smart LED Manufacturer — Vertical Integration from LED Packaging to Silicone Neon Flex

Digial LED Chip,Addressable LED Strip Manufacturer & COB / Neon Flex Factory for Wholesale and Engineering Buyers

Osmart is a vertically digital LED strip manufacturing factory built for B2B buyers who need consistent batch quality, engineering-ready specifications, and a supply partner that controls the critical processes under one roof. Rather than assembling strips from outsourced components, we operate five dedicated workshops covering LED die packaging, COB strip production, SMT placement, finished strip assembly and aging, and silicone neon tube extrusion. For wholesale distributors, lighting contractors, OEM/ODM brand owners, and project specifiers, this means fewer handoffs between suppliers, tighter traceability from LED bin to finished reel, and a factory audit trail that follows one continuous production path.

Workshop 1: Smart LED Packaging — Dust-free lant Addressable LED Production

Built-in IC Addressable LED Chip Manufacturer — 60 Production Lines, 80KK/Month

Our LED packaging workshop operates as a cleanroom-controlled environment dedicated to high-quality built-in IC addressable LEDs. The line is equipped with die bonding and wire bonding equipment, dispensing stations, color binning and taping machines, and curing ovens. With 60 production lines, monthly capacity reaches 80KKpcs , giving wholesale buyers a reliable base for repeat programs and project ramps without diode-level shortages.

The addressable LED portfolio covers the part numbers most frequently specified by engineering buyers: SK6812, SK9822, APA102-2020, WS2812B, WS2813, WS2815, HD107S, LC8808B, and LC8822. Because packaging is performed in-house, we control binning consistency, IC placement, and phosphor/dispensing parameters at the source—critical for addressable strip projects where one out-of-bin diode can shift color point across an entire run.

Workshop 2: COB LED Strip Workshop — High-Density, Dot-Free Flexible COB

COB LED Strip Supplier — Up to 1232 LEDs/m, No Visible Hot Spots

The COB workshop is purpose-built for high-density, dot-free flexible COB LED strip. LED dies are mounted directly onto the flexible PCB substrate, eliminating the discrete SMD package and the “dotted” appearance that appears when standard strips are viewed at close range or through diffusers. Our production range includes 576 LEDs/m, 720 LEDs/m, 864 LEDs/m, and high-density configurations up to 1,232 LEDs/m, covering linear lighting, cove, display, and architectural applications where uniform light output is a specification requirement rather than a preference.

For engineering and wholesale buyers, the practical value of COB is not only visual. Higher density means smoother dimming at low output, reduced hot-spot risk behind shallow profiles, and a more predictable photometric result across longer runs. We supply COB strip to distributors, commercial lighting contractors, and OEM buyers who need a consistent linear light source for repeat installations.

Workshop 3: SMT Workshop — Controlled Component Assembly and In-Process Testing

SMT LED Strip Assembly with Reflow Soldering and Semi-Finished Product Testing

The SMT workshop is where components converge into a functional strip. The process begins with moisture removal via baking ovens, followed by pick-and-place mounting of ICs, LEDs, capacitors, resistors, and other components onto the PCB. Reflow soldering then fuses the assembly under controlled thermal profiles.

What distinguishes this workshop for B2B buyers is the mandatory semi-finished product test after reflow. Every board is checked before it moves to final assembly, screening out major defects—open circuits, shifted components, reverse polarity, and solder anomalies—before the strip is cut, wired, or potted. For wholesale buyers, this in-process gate reduces the risk of downstream failures that only surface after installation, and it supports the batch consistency that distributors need when replenishing the same SKU across multiple orders.-

Workshop 4: LED Strip Assembly and Aging Workshop — 100% Max-Power Burn-In

Finished LED Strip Assembly and 100% Aging Test Before Shipment

The finished strip workshop converts semi-finished boards into customer-ready lengths. Each small unit is assembled to the required run length, wired according to the buyer’s connection and connector specification, and prepared for downstream neon extrusion or direct shipment.

The defining control point in this workshop is 100% aging at maximum power. Every finished strip—not a sampled batch, not a random pull—is run at full rated power through a thermal and electrical burn-in cycle. The purpose is deliberate stress: heat saturation exposes marginal solder joints, weak ICs, voltage-drop issues, and thermal-design weaknesses before the product leaves the factory. For engineering wholesale buyers, full-power aging is one of the clearest differentiators between a factory that tests for show and one that tests for field reliability in commercial and architectural installations.

Workshop 5: Neon Tube Extrusion Workshop — Silicone and Dow Corning UV-Resistant Neon Flex

Silicone LED Neon Flex Factory — Custom Shapes, Bend Directions, Anti-Yellowing Materials

The neon extrusion workshop takes aged, fully tested finished strips and encapsulates them into neon profiles. Extrusion tooling supports multiple shapes and bend directions, including side-bend and top-bend configurations, so wholesale and project buyers can specify the form factor that matches the installation geometry—lettering, contouring, architectural outlines, and curved signage.-33

Material selection is a core control. We extrude in silicone and Dow Corning silicone compounds formulated for UV resistance and anti-yellowing performance. This matters for outdoor and exposed installations where lower-grade jackets chalk, discolor, or degrade under solar load. By extrusion-encapsulating in-house after aging, we keep the optical interface, jacket integrity, and bend performance within one production chain—rather than shipping bare strip to a third-party neon processor who may introduce inconsistencies in wall thickness, gel fill, or curing.

R&D Capability

Our biggest technical advantage lies in end-to-end vertical R&D capability, covering digital LED chip packaging, flexible LED strip design, silicone neon development and reliability validation. Unlike many manufacturers that source LED beads externally, we develop and optimize both the pixel LED components and finished light strips in-house.

✅ LED Packaging Engineering Team,They master chip selection, die attach & wire bonding process optimization, encapsulation dispensing formula tuning, color bin control and signal stability optimization for addressable IC pixels. Technical strengths: They can customize LED chip size, bead dimension, luminous spectrum and binning tolerance to match your brightness, color consistency and anti-interference requirements for programmable projects. They also develop new pixel IC solutions and upgrade packaging structures to reduce light decay and signal drop-out issues.

✅ LED Strip Development Team ,They handle flexible PCB layout, circuit design, thermal dissipation structure, COB high-density layout, IC protocol compatibility, light effect programming and silicone neon extrusion structure design. Technical strengths: Able to customize ultra-high-density COB strips, develop new communication protocol matching, optimize heat path design for long-lifespan operation, and design special neon cross-section shapes for signage and architectural lighting. They translate your scene requirements into manufacturable circuit and optical solutions.

✅ Reliability & Quality Engineering Team,They build design-for-reliability standards from the R&D phase, not only testing finished goods. Technical strengths: Define accelerated test schemes: high-low temperature cycling, UV aging, waterproof pressure test, full-power burn-in, voltage surge test. They identify hidden risks of circuit, packaging and silicone material before sampling, greatly reducing field failure rate for your engineering projects.

✅ Production Technical Specialists, They act as the bridge between R&D and mass production. Technical strengths: Transfer new designs into stable production processes, optimize SMT, packaging, neon extrusion parameters, solve trial-production bottlenecks, control yield and keep consistent performance from prototypes to bulk orders.

This full-stack technical layout enables us to deliver fast feasibility assessment, custom parameter tuning, prototype validation and continuous new product iteration. Whether you need a minor modification based on our existing products, or a fully customized solution with special LED chip specs, exclusive IC protocol, custom optical performance and outdoor material requirements, our R&D team can support your project and balance performance, reliability and target cost.

Technology, Manufacturing and Global Support

Our team of approximately 120–160 employees covers product development, LED technology, manufacturing, quality management, international business and customer support.

Technology & R&D

Our technical team focuses on Digital LED Chips, addressable LED strip,Flexible LED neon lights, and transparent LED displays.

Manufacturing & Quality

Our production and quality teams manage manufacturing processes and product quality according to specific product requirements.

International Business

Our international team works with B2B customers across North America, South America, Europe and Oceania, supporting product communication, technical discussions and order coordination.

Customer Collaboration

We work across technical, manufacturing and business teams to understand customer requirements and develop LED solutions for specific applications.

Together, we focus on delivering reliable products and practical LED solutions for global customers.

From LED Technology to Intelligent Visual Solutions

Established in 2016, we focus on the development and manufacturing of LED products and intelligent lighting solutions for global B2B customers.

Over the years, our product capabilities have expanded from intelligent IC LEDs and addressable LED strips to transparent LED displays and holographic visual solutions.

Our brand Osmart focuses on intelligent LED technology and innovative visual applications. By combining digital IC technology, ultra-small LEDs and transparent mesh PCB structures, we develop solutions for electronics, lighting, automotive, IoT, retail and commercial applications.

Today, our products serve markets across North America, South America, Western Europe, Eastern Europe and Oceania, with approximately 70%–80% of our sales coming from international markets.

We continue to explore new LED technologies and applications to provide practical and flexible solutions for customers worldwide.

Intelligent LED Solutions for B2B Applications

We provide LED products and application solutions for customers in electronics, lighting, automotive, IoT, retail and commercial industries.

Built-in IC Digital LED Chips

Integrated IC technology helps support compact designs, flexible control and efficient PCB layouts.

Addressable LED Strips

Our ultra-small addressable LED strips are suitable for ambient lighting, smart home appliances, computers, gaming devices, automotive and IoT applications.

Transparent LED Displays

We develop transparent LED displays using intelligent LEDs and transparent mesh PCB structures for retail stores, advertising, brand displays and commercial spaces.

Customized LED Solutions

We work with customers on product requirements, technical communication, production and delivery to develop solutions based on specific applications.

Our focus is to provide practical, flexible and application-oriented LED solutions for global B2B customers.