Popula Group Company Limited
| Operatingtemperature | -20°C to 80°C |
| Productname | Industrial Centrifugal Fan |
| Speed | 500 - 3600 RPM |
| Noiselevel | 65 - 85 dB |
| Pressurerange | 500 - 5000 Pa |
| Mountingtype | Horizontal / Vertical |
| Supply Ability | 100000 Sets/week |
| Motorpower | 0.5 kW - 30 kW |
| Type | Centrifugal |
| Delivery Time | 2 two days for sampe order and 10 days for bulk order |
| Outletdiameter | 150 - 1000 mm |
| Application | Ventilation, Dust Collection, Material Handling |
| Airflowcapacity | 1000 - 50000 CFM |
| Material | Steel / Stainless Steel |
| Protectionclass | IP54 / IP55 |
| Payment Terms | T/T |
| Powersupply | 220V / 380V / 440V |
| Inletdiameter | 200 - 1200 mm |
| Certification | CE, UL, Rohs |
| Place of Origin | China |
| Brand Name | Popula |
View Detail Information
Explore similar products
High Heat Resistanc Boiler Centrifugal Induced Draft Fan ID Fan Corrosion
A Type Direct Drive Boiler Centrifugal Fan With Heavy Duty Motor For Demanding
High Volume Centrifugal Induced Draft Fan Coupling Drive Anti Abrasion For
OEM Boiler Centrifugal Induced Draft Fan For Boiler Ventilation Systems High
Product Specification
| Operatingtemperature | -20°C to 80°C | Productname | Industrial Centrifugal Fan |
| Speed | 500 - 3600 RPM | Noiselevel | 65 - 85 dB |
| Pressurerange | 500 - 5000 Pa | Mountingtype | Horizontal / Vertical |
| Supply Ability | 100000 Sets/week | Motorpower | 0.5 kW - 30 kW |
| Type | Centrifugal | Delivery Time | 2 two days for sampe order and 10 days for bulk order |
| Outletdiameter | 150 - 1000 mm | Application | Ventilation, Dust Collection, Material Handling |
| Airflowcapacity | 1000 - 50000 CFM | Material | Steel / Stainless Steel |
| Protectionclass | IP54 / IP55 | Payment Terms | T/T |
| Powersupply | 220V / 380V / 440V | Inletdiameter | 200 - 1200 mm |
| Certification | CE, UL, Rohs | Place of Origin | China |
| Brand Name | Popula | ||
| High Light | Large Air Volume Induced Draft Fan ，Induced Draft Fan For Power Plants | ||
* Model No.8D to No.20D of Y4-73 D-type boiler induced draft fan is composed of high temperature resistant backward curved impeller, reinforced thick steel welded volute casing, streamlined circular air inlet and separate base driving unit connected via flexible coupling. ·
* The impeller is assembled with multiple high-temperature backward curved airfoil blades, front disc and rear hub plate; all wheel assemblies pass strict static & dynamic balance calibration to guarantee stable low-vibration operation under high-temperature flue gas working condition. ·
* These boiler exhaust induced draft fans are fabricated with heat-resistant carbon steel plate, optimized internal volute flow path reduces flue gas flow loss to achieve high exhausting efficiency and stable performance under variable boiler load. ·
* The fan casing adopts integral reinforced welding structure, and D-type split base design separates fan casing base and motor pedestal for convenient equipment disassembly, maintenance and bearing replacement. ·
* The air inlet is one-piece curved streamline structure, which guides high-temperature flue gas evenly into impeller and improves overall exhausting efficiency.
Featured by high temperature resistance, large air volume, stable pressure output and reliable long-term continuous operation, Y4-73 induced draft fans are specialized supporting exhaust equipment for 2~670t/h steam boiler flue gas exhausting system of large thermal power plants.
All D-type models ranging from 8D to 20D can be equipped with standard Y-series three-phase asynchronous motor or YB flameproof motor for special fuel boiler on request, installation dimension follows D-type coupling mounting standard.
F-Y4-73 anti-corrosion variant is fully made of stainless steel material, customized for corrosive acidic flue gas exhausting from special industrial boilers, keeping identical airflow parameters and foundation mounting dimension as standard carbon steel Y4-73 fan.
Standard Y4-73 fan is used for conveying boiler high-temperature flue gas; equipped with explosion-proof flameproof motor, B-Y4-73 explosion-proof type can exhaust volatile flammable flue gas from fuel-fired boiler. The conveyed flue gas shall not contain sticky adhesive substance, bulky solid grit; dust particle concentration shall be controlled below 150mg/m³, the highest allowable medium temperature shall not exceed 250℃, and dust removal equipment with dust removing efficiency ≥85% must be installed at fan inlet.
B-Y4-73 explosion-proof centrifugal induced draft fan can exhaust volatile combustible flue gas; its technical performance, parameter selection, overall outline dimension and foundation installation size are completely consistent with standard Y4-73 fan, only the driving motor is replaced with explosion-proof specification.
Y4-73 D-type series covers full specifications from 8D to 20D with optional rotating speeds of 590/730/960/990/1450/1470/1480r/min and matched power from 9kW up to 355kW to satisfy different tonnage boiler’s flue exhausting resistance and flow requirement; detailed matching data is recorded in Y4-73 D-type product technical manual.
| Model | Power(kW) | Rotation(r/min) | Volume(m³/h) | Pressure(Pa) |
|---|---|---|---|---|
| 8D | 15/30 | 1450/1470 | 20442~44128 | 1284~1100 |
| 9D | 7.5/45 | 960/1480 | 15229~60533 | 721~1867 |
| 10D | 11/5.5/75 | 960/720/1480 | 15886~80570 | 891~2437 |
| 11D | 18.5/11/110 | 980/730/1480 | 27806~104600 | 1079~2829 |
| 12D | 30/15/220 | 980/730/1490 | 28282~166100 | 1285~3864 |
| 14D | 75/30/132 | 990/730/990 | 43591~164150 | 1681~2097 |
| 16D | 55/45/220 | 740/590/990 | 51699~233730 | 1302~2659 |
| 18D | 110/55 | 740/590 | 112160~177730 | 1532~965 |
| 20D | 355/160/90 | 990/740/590 | 153860~320610 | 3598~1192 |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
1996
Total Annual:
5000000-8000000
Employee Number:
1000~1200
Ecer Certification：
Verified Supplier
Popula Group Company Limited – Corporate Profile Founded in 1996 in Nanhai District, Foshan City, Popula Group Company Limited has grown into a leading manufacturer in the ventilation industry. Our state‑of‑the‑art campus spans 115,000 m², including 80,000 m²&nb... Popula Group Company Limited – Corporate Profile Founded in 1996 in Nanhai District, Foshan City, Popula Group Company Limited has grown into a leading manufacturer in the ventilation industry. Our state‑of‑the‑art campus spans 115,000 m², including 80,000 m²&nb...
Get in touch with us
Leave a Message, we will call you back quickly!