3kw Galvanized Steel Shutter Door Roll Forming Machine

Product Specification

Galvanized Steel Roller Shutter Door Lath Roll Forming Machine

Product Description

The roller shutter door forming machine is to produce rolling doors of major equipment, the use of galvanized steel or different colors of color steel or aluminum as a raw material, production of color plate rolling gates brilliant color, do not fade, do not rust, fire cut off, easy deformation, strength 3 times higher than the aluminum door.The machine adopts the cold forming, cold punching, automatic stack, industrial automation controlling system and precision machining technology, therefore is can run full automatically, including decoiling, forming, cutting to length and stacking.ot rust, fire cut off, easy deformation, strength 3 times higher than the aluminum door.

Specifications

175 type rolling door equipment is divided into two voltage models: AC 220V and 380V. A temperature protection switch is embedded inside the motor. When the temperature rises to 110 degrees, it can automatically cut off the power to protect the motor from being burned. When the temperature drops below 70 degrees, the temperature switch automatically resets and can be used again. The motor can be operated electrically and manually. The upper and lower strokes are automatically controlled by limit switches, which are convenient to adjust, precise in positioning, and have low noise during operation. It is matched with the remote control to realize wireless remote control of the opening and closing of the roller shutter; when the power is off, it can be operated manually or can be reserved Power supply to complete the opening and closing of the curtain. It is suitable for opening and closing of various buildings such as shopping malls, factories, garages, etc. It is an ideal accessory product for modern buildings.

Model 175 rolling door equipment is a rolling door with considerable strength and certain rigidity. It uses galvanized steel plate as the material. The thickness of the material is generally determined according to the area of ​​the door opening.

Product main parameters:

Installation size: 3100*500*900 mm

Number of molding channels: 12 groups

Roll material: 45# steel

Forming speed: 7m/min

Motor power: 3KW

Reducer specifications: 250

Sheet thickness: 0.6-1.2

Molding width: 9cm

Practical width: 8.2cm

Feeding width: 12.5cm

Control system: plc control

Cutter material: Cr12

The 175-type rolling door equipment is mainly composed of a feed-in platform, a forming host, a forming and shearing device, a hydraulic station, a computer control system and other parts. It is used in conjunction with the seaming machine. It is connected in series with multi-joint movable doors and is fixed in series. In the slideway, the door is rotated up and down with the reel above the door. The shutter door is horizontally separated like a wall. It consists of a shutter, a seat plate, a guide rail, a support, a reel, a cabinet, a control box, a roller door machine, a limiter, a door lintel, a manual quick release switch device, and a button switch. It is composed of 13 parts, including safety devices, and is generally installed in places where it is inconvenient to use wall separation.