Shenzhen Ruicom Technology Co.,Ltd.
| Payment Terms | T/T |
| Supply Ability | 100000 pieces/year |
| Delivery Time | 7-15days |
| Model Number | GHA360 |
| Certification | CE、RoHS |
| Brand Name | RUICOM |
| Place of Origin | China |
View Detail Information
Explore similar products
GKM392 MEMS Digital Vibration Sensor RS232/485/TTL Signal Output
GKC378 Triaxial MEMS Vibration Sensor Low Frequency Current Type
GKC370 MEMS Triaxial Vibration Sensor 0.5-4.5V Output Signal
GKM398 MEMS Vibration Sensor Current Type For Vehicle Vibration Testing
Product Specification
| Payment Terms | T/T | Supply Ability | 100000 pieces/year |
| Delivery Time | 7-15days | Model Number | GHA360 |
| Certification | CE、RoHS | Brand Name | RUICOM |
| Place of Origin | China | ||
| High Light | Ethernet High frequency Vibration Sensor ，GHA360 High frequency Vibration Sensor ，High Frequency Vibration Sensor IP67 | ||
GHA360 three-axis Ethernet high-frequency vibration sensor, integrated with X/Y/Z three-way transient acceleration synchronous acquisition capability, with a maximum single axis response frequency of 10 kHz, fully covering the fault characteristic frequency bands of mainstream industrial rotating machinery such as gear meshing frequency, bearing characteristic frequency, and blade passing frequency. Built in 20 bit high-resolution analog-to-digital conversion architecture, with fine sensitivity up to 0.095 mg/LSB, combining excellent linearity and the ability to pick up small vibration signals, ensuring accurate restoration of time-domain waveforms even under strong background noise. At the network communication level, it comes standard with a 10/100Mbps adaptive Ethernet interface * *, which supports pushing raw waveform data directly to upper level servers in the form of data packets without the need for intermediate gateways or protocol conversion devices, achieving end-to-end low latency data transmission. The decentralized design concept is particularly suitable for online status monitoring and full lifecycle health quantification evaluation of key rotating components such as motors, water pumps, fans, reducers, gearboxes, etc. It can provide a high fidelity and high reliability data base for predictive maintenance.
Technical Characteristics
❖ Measuring range ±50g;
❖ Power supply 12V;
❖ Operating temperature: -10 ℃ to+70 ℃;
❖ IP67 protection rating;
❖ Bandwidth DC~10kHz, low noise 35µg/√Hz.
Application Field
❖ Vibration monitoring of industrial equipment
❖ Monitoring of rotating machinery such as industrial pumps, motors, fans, air compressors, gas engines, generators, reducers, and gearboxes
Performance Parameters
| GHA360 | Parameter |
| Measurement Range | ±50g |
| Sensitivity | 0.095 mg/LSB |
| Measuring Axis | X / Y / Z Axis |
| Response Frequency | DC~10 kHz |
| Sampling Frequency | 80kHz |
| Transient Data | Transient data of X, Y, Z axes |
| Communication Interface | Ethernet |
| Default Server Address/Port | |
| Default Device Address | 192.168.1.164 |
| Device Address | The factory default address is "1" |
| Operating Ambient Temp | -40℃ ~ +85℃ |
| Installation Method | Magnetic or double-ended screw mounting (bottom hole M5*6) |
| Protection Rating | IP67 |
| Dimensions | Ø23.6×H60.6mm |
| Product Weight | ≤105g |
Spatial Coordinate System
Installation Method
Magnetic type: The sensor is directly attached to the vibration measurement position of the equipment, and the measurement direction is adjusted.
Screw type: The M5×10mm double-ended screw or M5×6mm to M8*8mm double-ended screw on the bottom of the sensor is tightened to the measurement position of the equipment, and the measurement direction is adjusted. After evenly applying silicone grease to the bottom of the sensor, it is fixed to the test platform by tightening the double-ended screw.
Wiring Diagram
The DC12V powered version of the sensor connects to the network power combiner via the included M12-8-pin aviation connector to an RJ45 adapter cable. Then, connect the network cable to the PC and connect the power supply to a DC 12V source, as shown in the figure as follow:
Schematic diagram of network cable power supply combiner connection
Product Dimensions
Shell size: Ø23.6×H60.6mm
Company Details
Business Type:
Manufacturer
Year Established:
2
Total Annual:
10000000USD-15000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom... Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom...
Get in touch with us
Leave a Message, we will call you back quickly!