5430t4 543093 GMC Terrain Tire Pressure Sensor Tpms For CitroëN Peugeot DS

5430t4/543093 Tpms Tire Pressure Sensor For Citroën / Peugeot / Fiat / Ds Automobiles / Fiat / Lancia / Alfa Rome

This TPMS sensor is cross-referenced with the following OEM part numbers and equivalents:

This TPMS sensor is compatible with a broad range of vehicles. Below is a comprehensive compatibility list:

This OE part number is also compatible with vehicles from:

• DS Automobiles

• FIAT (including 124 Spider, Scudo, Ulysse)

• LANCIA

• ALFA ROMEO

Note: This sensor may also be compatible with additional vehicle models not listed above. According to the manufacturer, these sensors are universal and compatible with up to 95% of car models. Always verify your original sensor part number and confirm compatibility with your specific vehicle before purchasing.

When the TPMS sensor begins to fail or its battery reaches the end of its service life, drivers may experience one or more of the following symptoms:

The most common indicator of a failing sensor is the persistent illumination of the TPMS warning light on the dashboard. If tire pressures are confirmed to be correct and the light remains on, the sensor itself is likely the issue.

The vehicle's display may show specific error messages indicating that the tire pressure monitoring system is inoperative or that wheel sensors are not detected.

The tire pressure display on the instrument cluster may show incorrect values, fail to update, or display dashes (—) instead of pressure readings.

The TPMS system may work intermittently, with the warning light turning on and off randomly during driving. This often indicates a weak sensor battery or internal component degradation.

A constantly flashing TPMS light (typically for 60 to 90 seconds upon startup) indicates a component is physically damaged or has permanently failed, making professional service mandatory.

Modern TPMS systems are designed to automatically recognize sensor positions after tire rotation. If the system fails to auto-learn or requires manual reprogramming after every tire service, one or more sensors may be malfunctioning.

The sensor is equipped with an automotive-grade battery with an expected service life of 4 to 6 years (or up to 5 years / 150,000 km) under normal operating conditions. The battery is non-replaceable, meaning the entire sensor unit must be replaced when the battery is depleted. The recommended change interval is 160,000 km or 5 years.

Before purchasing, confirm that your vehicle's original sensor carries part number 5430T4. This number can typically be found:

• Printed on the sensor body itself

• In the vehicle’s service documentation

• Through the vehicle manufacturer's parts catalog

This sensor may also be listed under alternate numbers including 543065, 543093, 9681102280, and 9673198580.

This sensor operates at 433 MHz for the European market and 315 MHz for the US market. Verify which frequency your vehicle's TPMS system requires before purchasing.

Important: This sensor requires proper programming for vehicle integration. Key points to consider:

• Cloning Method (Recommended): Copying the ID numbers from the original sensors to the new ones eliminates the need for a relearn procedure. The vehicle will not detect any difference between the old and new sensors.

• OE Diagnostic Tool Required: For certain vehicle models (e.g., Peugeot 807, Citroën C6), an OE diagnostic tool is required when sensor IDs are changed. The vehicle must be returned to a local dealership for this procedure.

• Alternative: When using supported configurable or programmable sensors, the IDs can be copied from the original sensors to avoid the need to perform a relearn.

• Programming Devices: The sensor can be programmed using AUTEL diagnostic devices.

• Pre-programmed Options: Some suppliers offer fully programmed sensors ready for installation, requiring no complex sensor programming.

• Professional Installation: Installation of TPMS sensors is recommended to be performed by trained professionals. Tire installation specialists should be aware of the sensor's presence to avoid damage during tire mounting and demounting procedures.

This sensor is supplied with a complete valve assembly. The standard configuration includes:

• Aluminium valve stem

• Air Valve with screw attachment

• Suitable for both light alloy rims and steel rims

Sensors can be replaced individually as they fail, or as a complete set of four. The choice depends on:

• The age of the remaining sensors (if approaching 4–6 years, consider full set replacement)

• Budget considerations

• The specific failure pattern (single sensor vs. multiple failures)

This sensor is designed for any wheel position and does not require position-specific programming. The vehicle's TPMS system will automatically learn which sensor is at which wheel position after driving.

The sensor is designed to withstand extreme operating conditions:

• Operating Temperature: -40°C to +125°C

• Storage Temperature: -40°C to +35°C

• Operating Humidity: Up to 90%

When purchasing replacement sensors:

• Choose sensors that meet or exceed OEM specifications

• Verify the product includes a warranty (typically 12 months or more)

• Ensure the sensor is supplied new and in original packaging

• Confirm the sensor includes the appropriate valve stem configuration

After installation:

• If the cloning method was used, the sensors will work immediately without additional steps

• If new IDs were programmed, drive the vehicle to allow the sensor to communicate with the TPMS receiver

• Monitor the TPMS display to confirm pressure readings are appearing correctly

• If the warning light persists, a diagnostic scan may be required to identify any remaining issues

When ordering this sensor, provide the following vehicle information to ensure correct programming:

• Make and model

• Year and month of production

• Target market (European or US market, as frequencies differ)

When installing the sensor, ensure the mounting nut is tightened to the specified torque of 4 Nm to prevent damage or improper sealing.

This sensor can be reprogrammed up to 100,000 times, making it a durable and long-lasting solution for vehicles requiring multiple sensor replacements over their lifetime.