| Description | 10-LCC (8.89x8.89) Accelerometers RoHS |
| Mfr. Part # | 20005837-01 |
| Package | 10-LCC (8.89x8.89) |
| Model Number | 20005837-01 |
View Detail Information
Explore similar products
Highly accurate 2 axis accelerometer system MEMSIC MXC6244AU with programmable
Ultra MEMSIC MXC4005XC three axis thermal accelerometer with no moving parts and
2 axis MEMSIC MXC6245XU accelerometer with 50 000g shock resistance and compact
Programmable 8 angle inclination sensor MEMSIC MXD6241AU with vibration immunity
Product Specification
| Description | 10-LCC (8.89x8.89) Accelerometers RoHS | Mfr. Part # | 20005837-01 |
| Package | 10-LCC (8.89x8.89) | Model Number | 20005837-01 |
The TE Connectivity 820M1 is a low-cost, single-axis, board-mountable piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance applications. It features a stable piezo-ceramic crystal in shear mode, low-power electronics, and a hermetically sealed LCC package. The 820M1 offers superior resolution, dynamic range, and bandwidth compared to MEMS devices, making it ideal for machine health monitoring, predictive maintenance, and impact/shock monitoring. It provides an amplified 1.25V signal output with a flat frequency response up to 10kHz.
| Parameter | Symbol | Min | Typ | Max | Unit | Notes/Conditions |
|---|---|---|---|---|---|---|
| ABSOLUTE MAXIMUM RATINGS | ||||||
| Supply voltage | Vdd | 1.5 | 3.3 | 5.5 | V | (2) With 1.5V-2.5V excitation, full-scale range will be limited. So 2.8V min recommended. |
| Storage temperature | TS | -40 | 125 | C | ||
| Shock limit (any axis) | gmax | 10,000 | g | |||
| ESD | -2 | +2 | kV | Human body model | ||
| OPERATING RANGES & NOISE - ACCELEROMETER | ||||||
| Measurement Range (g) | (Unless otherwise specified, all parameters are measured at 24C @ 3.3V applied) | |||||
| 25 | g | Sensitivity: 50.0 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 2.9 mg RMS | ||||
| 50 | g | Sensitivity: 25.0 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 5.9 mg RMS | ||||
| 100 | g | Sensitivity: 12.5 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 11.7 mg RMS | ||||
| 200 | g | Sensitivity: 5.00 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 23.2 mg RMS | ||||
| 500 | g | Sensitivity: 2.50 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 58.8 mg RMS | ||||
| 6000 | g | Sensitivity: 0.21 mV/g (30%), Non-Linearity: 2 %FSO, Residual Noise: 705 mg RMS | ||||
| Spectral Noise (mg/Hz) at 10Hz | 0.15 | mg/Hz | (For 25g range) | |||
| Spectral Noise (mg/Hz) at 100Hz | 0.07 | mg/Hz | (For 25g range) | |||
| Spectral Noise (mg/Hz) at 1kHz | 0.03 | mg/Hz | (For 25g range) | |||
| Spectral Noise (mg/Hz) at 10kHz | 0.02 | mg/Hz | (For 25g range) | |||
| ELECTRICAL SPECIFICATIONS | ||||||
| Excitation voltage | Vdd | 3.3 | 5.5 | Vdc | (Unless otherwise specified, all parameters are measured at 24C @ 3.3V applied) | |
| Zero g output voltage | Vdd/2 | 50% of applied voltage | ||||
| Average supply current | Iavg | 62 | A | |||
| Output impedance | Rout | 100 | ||||
| Warm-up time | 1 | Sec | ||||
| OPERATING SPECIFICATIONS - ACCELEROMETER | ||||||
| Full scale output | 1.25 | V | (Unless otherwise specified, all parameters are measured at 24C @ 3.3V applied) | |||
| 0.0g output voltage (bias V) | Vdd/2 | |||||
| Frequency response | 1db | Hz | 6 to 10k Hz | |||
| Frequency response | 3db | Hz | 2 to 15k Hz | |||
| Resonant frequency | 30k | Hz | ||||
| Transverse sensitivity | 8 | % | ||||
| Temperature sensitivity | 8 | % | -40 to 125C Refer to typical curve | |||
| ENVIRONMENTAL SPECIFICATIONS | ||||||
| Operating temperature | -40 | 125 | C | |||
| Storage temperature | -40 | 125 | C | |||
| Ambient humidity | 0 | 100 | % | |||
| Ingress protection | IP 68 | Hermetic Package | ||||
| Weight | 1.2 | grams | ||||
| CONNECTION TABLE | ||||||
| Pin Number | Definition | |||||
| 1 | N/C | do not connect to the circuit | ||||
| 2 | GND | |||||
| 3 | X axis output | |||||
| 4 | Vdd | |||||
| 5 | N/C | do not connect to the circuit | ||||
| 6 | N/C | do not connect to the circuit | ||||
| 7 | N/C | do not connect to the circuit | ||||
| 8 | N/C | do not connect to the circuit | ||||
| 9 | N/C | do not connect to the circuit | ||||
| 10 | N/C | do not connect to the circuit | ||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!