Changsha Purple Horn E-Commerce Co., Ltd.
| Description | Accelerometers RoHS |
| Mfr. Part # | BW20-36P |
| Model Number | BW20-36P |
View Detail Information
Explore similar products
Highly accurate 2 axis accelerometer system MEMSIC MXC6244AU with programmable
Ultra MEMSIC MXC4005XC three axis thermal accelerometer with no moving parts and
2 axis MEMSIC MXC6245XU accelerometer with 50 000g shock resistance and compact
Programmable 8 angle inclination sensor MEMSIC MXD6241AU with vibration immunity
Product Specification
| Description | Accelerometers RoHS | Mfr. Part # | BW20-36P |
| Model Number | BW20-36P |
The D-44 BW Series Area Sensor is a high-performance through-beam type sensor designed for long-distance detection up to 7 meters. It offers a wide range of configurations with 22 product types, featuring optical axis pitches of 20mm or 40mm and sensing heights from 120mm to 940mm. The 20mm optical axis pitch (BW20- models) minimizes unsensing areas. Equipped with high-brightness LEDs for easy visibility from multiple angles and distances, this sensor includes self-diagnosis, mutual interference prevention, and external diagnosis functions. Its robust IP65 protection structure ensures reliable operation in demanding environments.
| Model | Sensing Method | Sensing Distance | Min. Sensing Target | Optical Axis Pitch | Number of Optical Axis | Sensing Height | Response Time | Power Supply | Current Consumption | Operation Mode | Control Output | Protection Circuit | Light Source | Insulation Resistance | Synchronization Type | Interference Protection | Noise Immunity | Dielectric Strength | Vibration | Shock | Ambient Illumination | Ambient Temperature | Ambient Humidity | Weight (Approx.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BW20- (P) | Through-beam type | 0.1 to 7m | Opaque material of min. 30mm | 20mm | 8 to 48 | 140 to 940mm | Max. 10ms | 12-24VDC 10% (ripple P-P: max. 10%) | Emitter: max. 120mA, Receiver: max. 120mA | Light ON fixed | NPN or PNP open collector output Load voltage: max. 30VDC Load current: max. 100mA Residual voltage - NPN: max. 1VDC, PNP: max. 2.5VDC | Reverse polarity protection circuit, output short over current protection circuit | Infrared LED (850nm modulated) | Over 20M (at 500VDC megger) | Timing method by synchronous line | Interference protection by master/slave function | 240V the square wave noise (pulse width 1) by the noise simulator | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Ambient light: max. 100,000lx (receiver illumination) | -10 to 55, storage: -20 to 60 | 35 to 85%RH, storage: 35 to 85%RH | BW20-48: Approx. 2.1kg (approx. 1.4kg) |
| BW40- (P) | Opaque material of min. 50mm | 40mm | 4 to 24 | 120 to 920mm | BW40-24: Approx. 2.1kg (approx. 1.4kg) |
BW Series (unit: mm)
Emitter/Receiver Dimensions:
Overall Dimensions (Emitter/Receiver): 20mm diameter, 50mm length (excluding connector), 10mm mounting holes.
Cable: 5mm, 4-wire, 300mm length, M12 connector.
Input/Output Circuit and Connections
| Indicator | Color | Emitter Status | Receiver Status | Control Output |
|---|---|---|---|---|
| POWER | Green | Stable ON | - | - |
| Stable light ON | Green | - | Stable ON | ON |
| Unstable light ON | Yellow | - | ON | ON |
| Stable light OFF | Red | - | OFF | OFF |
| TEST (M/S) | Red | Flashing | - | - |
| Trouble | Cause | Solution |
|---|---|---|
| Not operating | Power supply | Supply the rated power. |
| Incorrect cable connection or disconnection | Check the wiring. | |
| Rated connection failure | Use within rated sensing distance. | |
| Not operating sometimes | Pollution by dirt of sensor cover | Remove dirt by soft brush or cloth. |
| Connector connection failure | Check the assembled part of the connector. | |
| Control output is OFF even though there is no target object. | Out of rated sensing distance | Use within the rated sensing distance. |
| There is an obstacle to cut off the light emitted between emitter and receiver | Remove the obstacle. | |
| There is a strong electric wave or noise generated by motor, electric generator, high voltage line etc. | Put away the strong electric wave or noise generator. | |
| LED displays for break of light emitting element | Break of light emitting element | Contact Autonics Corp. |
| LED displays for failure of emitter | Break of light emitting circuit | Contact Autonics Corp. |
| LED displays for failure of receiver | Break of light receiving element | Contact Autonics Corp. |
| LED displays for synchronous line | Synchronous line incorrect connection or disconnection | Check the wiring. |
| Break of synchronous circuit of emitter or receiver | Contact Autonics Corp. | |
| LED displays for control output over current | Control output line is shorten | Check the wiring. |
| Over load | Check the rated load capacity. | |
| LED displays for emitter malfunction | Emitter malfunction | Treat after checking the emitter display LED. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!