Changsha Purple Horn E-Commerce Co., Ltd.
| Operation Points | 15mT |
| Operating Current | 3.5mA |
| Release Points | 11mT |
| Operating Temperature | -40℃~+125℃ |
| Output Current | 25mA |
| Voltage - Supply | 4.5V~24V |
| Description | TO-92S Switches (Solid State) RoHS |
| Mfr. Part # | BDH8244 |
| Package | TO-92S |
| Model Number | BDH8244 |
View Detail Information
Explore similar products
Automotive Grade Hall Effect Switch ALLEGRO APS11700LLHALT-0SL1 with Multiple
Micropower Omnipolar Hall Effect Switch IC DIODES AH180N WG 7 for Portable
Magnetic switch sensor Slkor SL1303TE with HBM 8KV ESD protection and industrial
automotive Hall effect switch Infineon TLE4906LHALA1 with wide supply voltage
Product Specification
| Operation Points | 15mT | Operating Current | 3.5mA |
| Release Points | 11mT | Operating Temperature | -40℃~+125℃ |
| Output Current | 25mA | Voltage - Supply | 4.5V~24V |
| Description | TO-92S Switches (Solid State) RoHS | Mfr. Part # | BDH8244 |
| Package | TO-92S | Model Number | BDH8244 |
The BDH8244 is a unipolar Hall-effect switch IC designed for electronic commutation in brushless DC motor applications. It integrates a voltage regulator, temperature compensation circuit, small signal amplifier, and Schmitt trigger. The device features an open-drain output capable of sinking up to 25mA. When the magnetic field perpendicular to the Hall element exceeds the Operating Point threshold (BOP), the BDH8244 outputs a low level (ON). When the magnetic field drops below the Release Point (BRP), the device outputs a high level (OFF). The difference between the magnetic operating point and the release point is the magnetic hysteresis (BHYS). If the device powers up within the hysteresis range (below BOP, above BRP), the output will be in an uncertain state. The output will enter the correct state after first exceeding the BOP or BRP threshold. Key applications include brushless DC motors, motor and fan control, and position and speed sensors.
| Model | Operating Temperature | Voltage Range | Package | Remarks | Ordering Code | Packing | Pinout (8244-T) | Pinout (8244-S) | Pin Name | Pin Type | Description | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BDH8244 | -40~125 | 4.5-24V | TO-92S / SOT23 | Large SOT23 | BDH8244-T | 1000 PCS/Bag | 1 | - | VCC | Power | 4.5V~24V Input Power Supply Voltage | ||
| BDH8244-S | 3000 PCS/Reel | 2 | 3 | GND | Ground | Ground Terminal | |||||||
| 3 | 2 | OUT | Open-Drain Output | Open-Drain Output | |||||||||
| Absolute Maximum Ratings | |||||||||||||
| Parameter | Symbol | Min | Typical | Max | Unit | ||||||||
| Supply Voltage | VCC | - | - | 40 | V | ||||||||
| Output Current | IOUT | - | - | 25 | mA | ||||||||
| Output Off Voltage | VCE | -0.30 | - | 40 | V | ||||||||
| Power Dissipation | PD | - | - | 400 | mW | ||||||||
| Operating Temperature Range | TA | -40 | - | 125 | |||||||||
| Storage Temperature Range | TS | -55 | - | 150 | |||||||||
| Electrical Characteristics (Unless otherwise specified, TA=25) | |||||||||||||
| Parameter | Symbol | Test Condition | Min | Typical | Max | Unit | |||||||
| Operating Voltage | VCC | TJ < TJ (Max.) | 4.5 | - | 24 | V | |||||||
| Operating Current | ICC | VCC=3.5 to 28V, TA=25 | - | 4.5 | 8 | mA | |||||||
| Leakage Current (Shutdown) | ILEAK | Output Hi-Z | - | <0.1 | 10 | uA | |||||||
| Output Saturation Voltage | VSAT | Iout=20mA, TA=25 | - | 110 | 300 | mV | |||||||
| Output Rise Time | tr | R1=1K Co=20pF | - | 0.3 | 1.5 | s | |||||||
| Output Fall Time | tf | R1=1K Co=20pF | - | 0.15 | 1.5 | s | |||||||
| Magnetic Characteristics (Unless otherwise specified, TA=25) | |||||||||||||
| Parameter | Symbol | Min | Typical | Max | Unit | ||||||||
| Operating Point | BOP | - | 120 | 200 | mT | ||||||||
| Release Point | BRP | 10 | - | 85 | mT | ||||||||
| Hysteresis | BHYS | - | 35 | - | mT | ||||||||
Note: The BDH8244 integrates a voltage regulator and can operate over a wide power supply voltage range. When powered by an unregulated supply, external transient protection circuitry is mandatory. For regulated power supplies, it is recommended to connect a capacitor (typically 0.1F) in parallel with the chip's VCC power supply to ground, and optionally a series resistor R1 (typically 100). An output capacitor CL can be used as an output filter (typically 1nF).
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!