Henan Senyao Heavy Truck International Trade Co., Ltd.
| Compartments | Single chamber with surge baffles |
| Gaskets | PTFE / Viton, chemical-resistant |
| Engine Model | Weichai WP10.340E32 |
| Chassis Brand | SHACMAN F3000 6x4 |
| Supply Ability | 30 Units per Month |
| Tank Capacity | 22,000 Liters |
| Emission Standard | Euro 2 / Euro 3 |
| Discharge System | Pneumatic (compressed air), 3 bar max |
| Payment Terms | T/T,L/C |
| Tank Material | Carbon Steel Outer + SS316L Inner Liner (3mm) |
| Safety | Pressure relief valve, burst disc, grounding |
| Driving Type | LHD / RHD Available |
| Packaging Details | Nude packing with anti-rust coating; optional shrink-wrap for ocean freight |
| Transmission | FAST 9-speed Manual |
| Delivery Time | 35-55 working days after deposit |
| Discharge Rate | ~45 m3/h at 2 bar |
| Engine Power | 340 HP |
| Certification | ISO 9001:2015, CCC |
| Model Number | F3000 6x4 22KL-CT |
| Brand Name | SHACMAN |
| Place of Origin | Shaanxi, China |
View Detail Information
Explore similar products
Water Tanker Truck for Road Cleaning Brand New Shacman 20 M3 6X4 300HP Water
18000L SHACMAN F3000 6x4 Crude Oil Transport Tanker Truck 340HP Discharge Pump
28000L SHACMAN F3000 6x4 Gasoline Petrol Transport Tanker Truck 340HP Explosion
10000L SHACMAN F3000 6x4 Waste Oil Recovery Vacuum Tanker Truck 340HP Suction
Product Specification
| Compartments | Single chamber with surge baffles | Gaskets | PTFE / Viton, chemical-resistant |
| Engine Model | Weichai WP10.340E32 | Chassis Brand | SHACMAN F3000 6x4 |
| Supply Ability | 30 Units per Month | Tank Capacity | 22,000 Liters |
| Emission Standard | Euro 2 / Euro 3 | Discharge System | Pneumatic (compressed air), 3 bar max |
| Payment Terms | T/T,L/C | Tank Material | Carbon Steel Outer + SS316L Inner Liner (3mm) |
| Safety | Pressure relief valve, burst disc, grounding | Driving Type | LHD / RHD Available |
| Packaging Details | Nude packing with anti-rust coating; optional shrink-wrap for ocean freight | Transmission | FAST 9-speed Manual |
| Delivery Time | 35-55 working days after deposit | Discharge Rate | ~45 m3/h at 2 bar |
| Engine Power | 340 HP | Certification | ISO 9001:2015, CCC |
| Model Number | F3000 6x4 22KL-CT | Brand Name | SHACMAN |
| Place of Origin | Shaanxi, China | ||
| High Light | 22000L Chemical Liquid Tanker ，SS316L Stainless Steel Liner ，Corrosion Resistant ISO Tank | ||
Corrosion-resistant chemical transport — stainless steel lined, compressed air discharge, ADR-ready
Chemical tanker — SS316L lined, built for corrosive cargo transport
Rear control station with pneumatic valves and pressure gauges
This tanker is designed for industrial chemical logistics — solvents, mild acids, caustic solutions, liquid fertilizers, and similar cargo that would eat through a standard carbon steel tank in months. The inner tank is 3mm 316L stainless steel, fully seam-welded and passivated, with a carbon steel outer shell for structural strength and impact protection. Total capacity is 22,000 liters in a single compartment with internal surge baffles.
Discharge is pneumatic rather than pumped — compressed air at up to 3 bar pushes the product out through the bottom outlet. Why air? No pump seals to fail from chemical attack, no product contamination from pump lubricants, and you can throttle the discharge rate by adjusting air pressure. At 2 bar you are moving about 45 cubic meters per hour. The on-board compressor is PTO-driven with a 200-liter air receiver tank. All gaskets and seals are PTFE or Viton, selected based on the chemical compatibility chart for your cargo type.
| Tank Capacity | 22,000 Liters |
| Inner Material | 3mm Stainless Steel 316L |
| Outer Shell | Carbon Steel, structural |
| Discharge | Pneumatic, 3 bar max, 45 m3/h |
| Gaskets/Seals | PTFE / Viton, chemical-resistant |
| Safety | PRV 3.5 bar + burst disc + grounding |
SHACMAN F3000 chassis — proven 340HP platform for hazmat logistics
The tank can be configured with an optional steam heating jacket (half-pipe coil on the lower third) for products that need to stay above a certain temperature. Safety is a priority: pressure/vacuum relief valve set at 3.5 bar, a burst disc as secondary overpressure protection, and a dedicated earthing point with a 10-meter grounding cable. For hazmat certification, we can supply the tank with ADR plate, UN markings, and the required documentation package. This is the kind of truck that chemical distributors in Southeast Asia and East Africa use to move bulk solvents between ports and industrial parks.
Company Details
Business Type:
Trading Company
Year Established:
2025
Total Annual:
15000-20000
Employee Number:
10~20
Ecer Certification：
Verified Supplier
Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin... Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin...
Get in touch with us
Leave a Message, we will call you back quickly!