Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T、paypal |
| Supply Ability | 50ton/month |
| Delivery Time | 5-7days |
| Packaging Details | 50KG/set, 25KG/bar |
| Electrical Properties | Excellent dielectric insulation over wide temp/humidity range |
| Physical Properties | Ultra-soft, buffers mechanical and thermal stress |
| Environmental Resistance | Good moisture, aging, and ozone resistance |
| Temperature Range | Approx. -50°C to +150°C long-term |
| Brand Name | Hanast |
| Model Number | HN-6607A/B |
| Certification | FDA/ROHS/REACH |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Two-Part RTV Silicone Gel HN-6607 | Long Pot Life | Precision Potting
Low Viscosity Electronic Silicone Gel rubber Insulation Potting Automotive
Junction Box Electrical Potting Liquid Silicone Gel Insulation Waterproof Igbt
Waterproof Electronic Silicone Gel Liquid 2 Component RTV Potting Compound
Product Specification
| Payment Terms | T/T、paypal | Supply Ability | 50ton/month |
| Delivery Time | 5-7days | Packaging Details | 50KG/set, 25KG/bar |
| Electrical Properties | Excellent dielectric insulation over wide temp/humidity range | Physical Properties | Ultra-soft, buffers mechanical and thermal stress |
| Environmental Resistance | Good moisture, aging, and ozone resistance | Temperature Range | Approx. -50°C to +150°C long-term |
| Brand Name | Hanast | Model Number | HN-6607A/B |
| Certification | FDA/ROHS/REACH | Place of Origin | Guangdong, China |
| High Light | Electronic silicone gel with warranty ，Temperature resistant silicone gel ，Moisture resistant electronic protective gel | ||
Electronic Protective Silicone Gel HN-6607 | Temperature & Moisture Resistant
Product Overview for Electronic Silicone Gel:
HN-6607 silicone gel provides comprehensive "armor-like" protection for electronic assemblies. It effectively resists moisture, dust, salt spray, and other environmental factors while maintaining stable performance over a wide temperature range, significantly extending the service life and reliability of electronic devices.
Product Performance for Electronic Silicone Gel:
- Electrical Properties: Excellent dielectric insulation over wide temp/humidity range.
- Physical Properties: Ultra-soft, buffers mechanical and thermal stress.
- Environmental Resistance: Good moisture, aging, and ozone resistance.
- Temperature Range: Approx. -50°C to +150°C long-term.
Product Highlights for Electronic Silicone Gel:
- ✅ Full Environmental Protection: Excellent moisture, dust, and salt spray resistance.
- ✅ Superior Thermal Stability: Withstands thermal cycling, stable performance.
- ✅ Reliable Electrical Protection: High insulation strength prevents short circuits.
- ✅ Extends Service Life: Protects core components, enhancing product reliability.
Product Applications for Electronic Silicone Gel:
- Potting for outdoor electronics (e.g., GPS trackers, weather stations)
- Electronics in marine or high-humidity industrial environments
- Electronic modules near automotive engine bays
- High-reliability power supplies and inverters
Operation Guide for Electronic Silicone Gel:
1. Ensure components are clean, dry, and free of grease/oxides.
2. Pour the uniformly mixed (1:1) compound to fully cover or pot the areas needing protection.
3. Cure at 120°C for 20-30 minutes to form a durable, soft protective layer.
Precautions for Electronic Silicone Gel:
- Pre-heat and dry components that may condense moisture or are cold before potting to prevent trapping water.
Packaging & Storage for Electronic Silicone Gel:
- Packaging: 25 kg per set (25 kg pail of A + 25kg pail of B)
- Storage: Keep in a sealed container in a cool, dry place below 25°C.
- Shelf Life: 6 months (below 25°C).
- Transportation: Classified as non-hazardous goods; can be transported as general chemicals.
FAQ for Electronic Silicone Gel:
1. Q: What is the long-term operating temperature range?
A: Approximately -50°C to +150°C continuously, with short-term tolerance for higher temperatures.
2. Q: Can a potted component be repaired? Can the gel be removed?
A: Yes. The cured gel is elastic and soft, allowing careful, bulk removal by hand or tool for component replacement and repotting.
3. Q: Does it adhere to plastic enclosures like ABS, PC?
A: Adhesion varies by plastic type and surface. Adhesion to most plastics is moderate. Mechanical locking features (clips, grooves) and adhesion testing are recommended.
4. Q: What is its thermal conductivity? Can it dissipate heat?
A: HN-6607 is a standard electrical insulator with low thermal conductivity (~0.2 W/m·K). It is for insulation, not heat dissipation. Use our thermal conductive gels for heat management.
5. Q: Is it RoHS compliant?
A: Yes, it complies with RoHS. Relevant test reports are available.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
.gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ... .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ...
Get in touch with us
Leave a Message, we will call you back quickly!