Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T、paypal |
| Supply Ability | 50ton/month |
| Delivery Time | 5-7days |
| Packaging Details | 50KG/set, 25KG/bar |
| Electrical Properties | Excellent dielectric insulation over wide temp/humidity range |
| Physical Properties | Ultra-soft, buffers mechanical and thermal stress |
| Environmental Resistance | Good moisture, aging, and ozone resistance |
| Temperature Range | Approx. -50°C to +150°C long-term |
| Brand Name | Hanast |
| Model Number | HN-6607A/B |
| Certification | FDA/ROHS/REACH |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Two-Part RTV Silicone Gel HN-6607 | Long Pot Life | Precision Potting
Low Viscosity Electronic Silicone Gel rubber Insulation Potting Automotive
Junction Box Electrical Potting Liquid Silicone Gel Insulation Waterproof Igbt
Waterproof Electronic Silicone Gel Liquid 2 Component RTV Potting Compound
Product Specification
| Payment Terms | T/T、paypal | Supply Ability | 50ton/month |
| Delivery Time | 5-7days | Packaging Details | 50KG/set, 25KG/bar |
| Electrical Properties | Excellent dielectric insulation over wide temp/humidity range | Physical Properties | Ultra-soft, buffers mechanical and thermal stress |
| Environmental Resistance | Good moisture, aging, and ozone resistance | Temperature Range | Approx. -50°C to +150°C long-term |
| Brand Name | Hanast | Model Number | HN-6607A/B |
| Certification | FDA/ROHS/REACH | Place of Origin | Guangdong, China |
| High Light | Electronic silicone gel with warranty ，Temperature resistant silicone gel ，Moisture resistant electronic protective gel | ||
Electronic Protective Silicone Gel HN-6607 | Temperature & Moisture Resistant
Product Overview for Electronic Silicone Gel:
HN-6607 silicone gel provides comprehensive "armor-like" protection for electronic assemblies. It effectively resists moisture, dust, salt spray, and other environmental factors while maintaining stable performance over a wide temperature range, significantly extending the service life and reliability of electronic devices.
Product Performance for Electronic Silicone Gel:
- Electrical Properties: Excellent dielectric insulation over wide temp/humidity range.
- Physical Properties: Ultra-soft, buffers mechanical and thermal stress.
- Environmental Resistance: Good moisture, aging, and ozone resistance.
- Temperature Range: Approx. -50°C to +150°C long-term.
Product Highlights for Electronic Silicone Gel:
- ✅ Full Environmental Protection: Excellent moisture, dust, and salt spray resistance.
- ✅ Superior Thermal Stability: Withstands thermal cycling, stable performance.
- ✅ Reliable Electrical Protection: High insulation strength prevents short circuits.
- ✅ Extends Service Life: Protects core components, enhancing product reliability.
Product Applications for Electronic Silicone Gel:
- Potting for outdoor electronics (e.g., GPS trackers, weather stations)
- Electronics in marine or high-humidity industrial environments
- Electronic modules near automotive engine bays
- High-reliability power supplies and inverters
Operation Guide for Electronic Silicone Gel:
1. Ensure components are clean, dry, and free of grease/oxides.
2. Pour the uniformly mixed (1:1) compound to fully cover or pot the areas needing protection.
3. Cure at 120°C for 20-30 minutes to form a durable, soft protective layer.
Precautions for Electronic Silicone Gel:
- Pre-heat and dry components that may condense moisture or are cold before potting to prevent trapping water.
Packaging & Storage for Electronic Silicone Gel:
- Packaging: 25 kg per set (25 kg pail of A + 25kg pail of B)
- Storage: Keep in a sealed container in a cool, dry place below 25°C.
- Shelf Life: 6 months (below 25°C).
- Transportation: Classified as non-hazardous goods; can be transported as general chemicals.
FAQ for Electronic Silicone Gel:
1. Q: What is the long-term operating temperature range?
A: Approximately -50°C to +150°C continuously, with short-term tolerance for higher temperatures.
2. Q: Can a potted component be repaired? Can the gel be removed?
A: Yes. The cured gel is elastic and soft, allowing careful, bulk removal by hand or tool for component replacement and repotting.
3. Q: Does it adhere to plastic enclosures like ABS, PC?
A: Adhesion varies by plastic type and surface. Adhesion to most plastics is moderate. Mechanical locking features (clips, grooves) and adhesion testing are recommended.
4. Q: What is its thermal conductivity? Can it dissipate heat?
A: HN-6607 is a standard electrical insulator with low thermal conductivity (~0.2 W/m·K). It is for insulation, not heat dissipation. Use our thermal conductive gels for heat management.
5. Q: Is it RoHS compliant?
A: Yes, it complies with RoHS. Relevant test reports are available.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat... Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat...
Get in touch with us
Leave a Message, we will call you back quickly!