Shenzhen Hanast New Material co.,LTD
| Thermal Conductivity | 2.0 W/mK |
| Payment Terms | T/T |
| Packaging Details | 50KG/Set (Part A: 25KG + Part B: 25KG Drum) |
| Mix Ratio | 1:1 (A:B) |
| Temperature Range | -40℃ ~ 150℃ |
| Supply Ability | 50000 Kilograms per Month |
| Volume Resistivity | >5.0E14 Ohm·cm |
| Cure Time (25℃) | 4-6 Hours |
| Shelf Life | 6 Months |
| Hardness | 45-50 Shore A |
| Accelerated Cure (80℃) | 30-60 Minutes |
| Dielectric Strength | >25 kV/mm |
| Flame Retardant | UL94 V-0 |
| Viscosity (Mixed) | 5000-8000 cP (Customizable to 2000 cP) |
| Delivery Time | 5-7 Days |
| Certification | ROHS, REACH, UL94 V-0, ISO 9001 |
| Model Number | HN-8820-IND |
| Brand Name | Hanast |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
3.0 W/mK Thermally Conductive Silicone Potting Compound for IGBT Power Module
Thermally Conductive Potting Compound HN-8820 | 2.0 W/M·K | V-0 Flame Retardant
2.0 W/M·K Silicone Potting Compound | HN-8820 A/B | RTV Addition Cure
HN-8820 Potting Gel | 1:1 Mix Ratio | High Thermal Conductivity | UL94 V-0
Product Specification
| Thermal Conductivity | 2.0 W/mK | Payment Terms | T/T |
| Packaging Details | 50KG/Set (Part A: 25KG + Part B: 25KG Drum) | Mix Ratio | 1:1 (A:B) |
| Temperature Range | -40℃ ~ 150℃ | Supply Ability | 50000 Kilograms per Month |
| Volume Resistivity | >5.0E14 Ohm·cm | Cure Time (25℃) | 4-6 Hours |
| Shelf Life | 6 Months | Hardness | 45-50 Shore A |
| Accelerated Cure (80℃) | 30-60 Minutes | Dielectric Strength | >25 kV/mm |
| Flame Retardant | UL94 V-0 | Viscosity (Mixed) | 5000-8000 cP (Customizable to 2000 cP) |
| Delivery Time | 5-7 Days | Certification | ROHS, REACH, UL94 V-0, ISO 9001 |
| Model Number | HN-8820-IND | Brand Name | Hanast |
| Place of Origin | Guangdong, China | ||
| High Light | 2.0W/mK Charging Pile Potting Compound ，Low Viscosity LED Driver Encapsulant ，UL94 V-0 PCB Protection Silicone Potting | ||
HN-8820-IND is a low-viscosity two-part addition-cure silicone potting compound specifically formulated for EV charging pile power modules, high-power LED driver encapsulation, industrial power supplies, and telecom equipment. With 2.0W/mK thermal conductivity, UL 94 V-0 flame retardancy, and excellent flow characteristics (5000-8000 cP, customizable to 2000 cP), this PCB protection potting compound fills tight spaces and complex geometries for complete electronic component protection in 24/7 outdoor and industrial environments.
EV Charging Piles & Stacks
High-power DC fast charging module potting with combined thermal management and fire safety. Protects rectifier stacks, power modules, and control boards in 50kW-350kW charging stations exposed to 24/7 outdoor conditions.
High-Power LED Drivers
Outdoor street light and stadium light power supply waterproof encapsulation. 2.0W/mK thermal conductivity extends LED driver service life by efficiently dissipating operational heat through the potting compound.
Industrial Power Supplies
PCB-level protection for factory automation controllers, machinery control units, and industrial SMPS modules requiring vibration resistance and environmental sealing.
Telecom Equipment
RRU (Remote Radio Unit), baseband processing units, and network transformer moisture-proof potting for outdoor telecom infrastructure and 5G base stations.
Motor Drive Inverters
Industrial VFD (Variable Frequency Drive) and servo drive power stage potting. Absorbs mechanical vibration while providing high-voltage insulation for IGBT/MOSFET power modules.
Medical Power Supplies
Low-outgassing formulation compatible with clean room assembly environments for medical device power supply encapsulation.
| Protection Method | Silicone Potting (HN-8820-IND) | Conformal Coating | Epoxy Potting |
|---|---|---|---|
| Coverage | Complete 3D encapsulation | Thin surface film only | Complete but rigid |
| Moisture Barrier | Excellent, full seal | Moderate | Excellent |
| Reworkability | Removable for repair | Difficult to remove | Non-repairable |
| Thermal Management | 2.0W/mK heat dissipation | Minimal | 0.5-1.0W/mK |
| Vibration Protection | Shock absorbing | Minimal | Rigid, may crack |
As a specialized charging pile potting compound manufacturer in Shenzhen, Guangdong, we offer lower viscosity options (2000-4000 cP), faster cure profiles, and bulk competitive factory-direct pricing with 50,000 KG/month capacity. 1KG MOQ for sample testing with complete TDS, MSDS, and RoHS/REACH documentation. Technical application engineering support provided for dispensing process optimization.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
.gtr-container-q7w2e9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-q7w2e9-main-title { font-size: 18px; font-weight: bold; color: #01EDC9; margin-bottom: 20px; tex... .gtr-container-q7w2e9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-q7w2e9-main-title { font-size: 18px; font-weight: bold; color: #01EDC9; margin-bottom: 20px; tex...
Get in touch with us
Leave a Message, we will call you back quickly!