JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Model NO. | 630 |
| Shape | Round |
| Technique | Hot Rolled |
| Surface Treatment | Bright |
| Specification | OD 6-300mm |
| Production Capacity | 50000kgs |
| Tensile Strength | 1105-1310 MPa |
| Yield Strength | 1000-1170 MPa |
| Elongation | 10-16% |
| Hardness | 28-44 HRC |
| Density | 7750 kg/m³ |
| Thermal Conductivity | 18.4-22.7 W/m.K |
| Specific Heat | 460 J/kg.K |
| Electrical Resistivity | 800 nΩ.m |
| Coeff Thermal Expansion | 10.8-11.6 µm/m/°C |
| Certification | ISO, AISI, ASTM, EN, DIN, JIS |
View Detail Information
Explore similar products
ASTM A276 Bright Annealing UNS S17400 Stainless Steel Round Bar with OD 6-300mm
Hot Rolled Bright Surface 17-4PH Stainless Steel Round Bar UNS S17400 with OD 6
Grade 201 Stainless Steel Bright Bar Hot Rolled with Diameter 3mm - 50mm
ASTM 276 Grade 304 Bright Polished Stainless Steel Round Bar Diameter 3-150mm
Product Specification
| Model NO. | 630 | Shape | Round |
| Technique | Hot Rolled | Surface Treatment | Bright |
| Specification | OD 6-300mm | Production Capacity | 50000kgs |
| Tensile Strength | 1105-1310 MPa | Yield Strength | 1000-1170 MPa |
| Elongation | 10-16% | Hardness | 28-44 HRC |
| Density | 7750 kg/m³ | Thermal Conductivity | 18.4-22.7 W/m.K |
| Specific Heat | 460 J/kg.K | Electrical Resistivity | 800 nΩ.m |
| Coeff Thermal Expansion | 10.8-11.6 µm/m/°C | Certification | ISO, AISI, ASTM, EN, DIN, JIS |
| High Light | Hot Rolled SUS630 Round Bar ，Bright Surface Stainless Steel Round Bar ，OD 6-300mm 17-4PH Round Bar | ||
17-4 Precipitation Hardening (Type 630) is a chromium-copper precipitation hardening stainless steel designed for applications requiring high strength and moderate corrosion resistance. This alloy maintains high strength up to approximately 600°F (316°C).
Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with copper and niobium additions. This grade combines high strength, hardness (up to 572°F / 300°C), and excellent corrosion resistance. Mechanical properties can be optimized through heat treatment, achieving very high yield strength up to 1100-1300 MPa (160-190 ksi).
This grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It provides adequate resistance to atmospheric corrosion and diluted acids or salts, with corrosion resistance equivalent to Alloy 304 or 430.
| Standard | Designation |
|---|---|
| ASTM | A693 grade 630 (AMS 5604B) UNS S17400 |
| EURONORM | 1.4542 X5CrNiCuNb 16-4 |
| AFNOR | Z5 CNU 17-4PH |
| DIN | 1.4542 |
Alloy 17-4 PH withstands corrosive attacks better than standard hardenable stainless steels and is comparable to Alloy 304 in most media. For stress corrosion cracking risks, higher aging temperatures above 1022°F (550°C), preferably 1094°F (590°C), should be selected.
The alloy may experience crevice or pitting attack in stagnant seawater but provides excellent corrosion resistance in chemical, petroleum, paper, dairy, and food processing industries (equivalent to 304L grade).
| Element | Content (%) |
|---|---|
| Carbon (C) | 0.07 max |
| Manganese (Mn) | 1.00 max |
| Silicon (Si) | 1.00 max |
| Phosphorus (P) | 0.04 max |
| Sulfur (S) | 0.030 max |
| Chromium (Cr) | 15.0 - 17.5 |
| Nickel (Ni) | 3.0 - 5.0 |
| Copper (Cu) | 3.0 - 5.0 |
| Niobium + Tantalum (Nb+Ta) | 0.15 - 0.45 |
| Condition | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Rockwell C |
|---|---|---|---|---|
| Solution Treated | 1105 (typ) | 1000 (typ) | 15 (typ) | 38 max |
| Condition 900 | 1310 min | 1170 min | 10 min | 40 min |
| Condition 1150 | 930 min | 724 min | 16 min | 28 min |
| Property | Value |
|---|---|
| Density | 7750 kg/m³ |
| Thermal Expansion (0-100°C) | 10.8 µm/m/°C |
| Thermal Conductivity (100°C) | 18.4 W/m·K |
| Specific Heat (0-100°C) | 460 J/kg·K |
| Electrical Resistivity | 800 nΩ·m |
Solution Treatment (Condition A): Heat to 1040°C for 0.5 hours, then air-cool to 30°C. Small sections may be oil quenched.
Age Hardening: Performed at low temperatures to achieve required mechanical properties. Typical conditions include:
| Condition | Temperature (°C) | Time (h) | Typical Hardness (HRC) | Tensile Strength (MPa) |
|---|---|---|---|---|
| H900 | 482 | 1 | 44 | - |
| H925 | 496 | 4 | 42 | 1170-1320 |
| H1150 | 621 | 4 | 33 | 930-1080 |
Welding: Grade 630 can be welded using all conventional methods without pre-heating. Proper design is essential to prevent weldment stresses.
Machining: Best performed in solution-treated condition, with machining rates similar to grade 304 stainless steel.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!