1250KN Scrap Metal Baler Machine 1.5-2Tons/hour Production Rate With Automatic

Product Specification

1250KN Scrap Metal Baler Machine 1.5-2Tons/hour Production Rate With Automatic Operation Model

Product Overview

The Y83-125 hydraulic metal baler is a compact and practical scrap metal baling machine designed for small and medium-sized recycling yards, metal collection stations, workshops, foundries, and metal processing companies. With a 1250kN nominal force, a 1200×700×600mm compression chamber, and an 18.5kW hydraulic power system, this model provides reliable compression performance for loose metal scrap while keeping the machine structure simple and easy to operate.

This metal baler is suitable for compressing steel scrap, aluminum scrap, copper scrap, stainless steel offcuts, light metal waste, cans, profiles, and mixed recyclable metal materials. It produces compact bales with a bale size of 250–450×250×250mm and a bale density of more than 1800kg/m³. By turning loose scrap into regular high-density bales, the Y83-125 helps customers save storage space, improve loading efficiency, reduce transportation cost, and make scrap easier to sell or remelt.

Compared with larger hydraulic metal balers, the Y83-125 is more suitable for customers who have limited workshop space, moderate daily scrap volume, or a tighter equipment budget. Its 1500–2000kg/h capacity makes it a good choice for businesses that need stable daily processing without investing in a large-scale baling system. The turn-out bale discharging structure and hand valve control system are simple, durable, and easy for operators to learn, which makes this machine especially practical for recycling sites that value low maintenance and straightforward operation.

Cause

Many small recycling businesses and workshops collect loose metal scrap every day, but loose materials are difficult to manage efficiently. Scrap such as metal offcuts, aluminum waste, steel sheets, copper pieces, and mixed industrial scrap often takes up too much space and increases handling difficulty.

When scrap metal is stored without compression, customers may face problems such as:

Limited yard or workshop space

Low truck loading efficiency

Higher transportation cost per ton

Messy material storage

Difficult weighing and material classification

Lower recovery value due to irregular scrap shape

For small and medium scrap processors, choosing a compact hydraulic metal baler is an effective way to improve site management and increase material handling efficiency.

Solution

The Y83-125 hydraulic metal baler provides a cost-effective solution by compressing loose metal scrap into dense, regular bales. With 1250kN pressing force and a compact chamber design, the machine can process common recyclable metal materials into easy-to-handle bales for storage, transportation, resale, or furnace feeding.

Key advantages include:

1250kN hydraulic pressing force for stable scrap compression

Compact 1200×700×600mm chamber suitable for smaller sites

1500–2000kg/h capacity for daily recycling operations

Bale density above 1800kg/m³ for better storage and transport efficiency

250–450×250×250mm bale size for easy stacking and handling

Turn-out bale discharging for convenient operation

Hand valve control for simple use and easy maintenance

18.5kW power system for lower energy consumption

Specifications

Application

The Y83-125 hydraulic scrap metal baler is widely used in:

Small scrap recycling yards

Metal collection stations

Metal fabrication workshops

Foundries and melting plants

Aluminum and copper recycling businesses

Industrial waste metal recovery sites

Auto repair and dismantling workshops

Small steel processing factories

This model is especially suitable for customers who need to compress light and medium scrap metal into small, dense bales before transportation or resale. Its compact structure makes it suitable for workshops and recycling sites where space is limited but daily scrap processing is still required.

How It Works

The operator places loose scrap metal into the compression chamber. After feeding, the hydraulic system drives the pressing plate to compress the material into a dense rectangular bale. The machine completes one cycle within 100 seconds, depending on the material type and feeding condition.

After compression, the finished bale is discharged through the turn-out system. The operator can then remove the bale and continue the next cycle. The hand valve control system makes the machine easy to operate, even for workers without complicated equipment experience.

How To Choose

The Y83-125 metal baler is recommended if:

Your scrap processing volume is around 1.5–2 tons per hour

Your materials are mainly light and medium metal scrap

Your workshop or recycling site has limited space

You need small and easy-to-handle bales

You prefer simple hand valve control

You want a lower power consumption machine

You need a practical and economical baler for daily recycling work

For customers with higher output requirements, larger chamber needs, or heavier scrap materials, a larger model such as Y83-160, Y83-200, or Y83-250 can also be considered.

FAQ

Q1: What materials can the Y83-125 metal baler process?

It can process steel scrap, aluminum scrap, copper scrap, stainless steel offcuts, light metal waste, cans, profiles, and mixed recyclable metal scrap. For harder or thicker scrap materials, the material size and thickness should be confirmed before choosing the model.

Q2: Is the Y83-125 suitable for a small recycling yard?

Yes. The Y83-125 is very suitable for small and medium recycling yards because it has a compact chamber, moderate capacity, simple operation, and lower power demand compared with larger balers.

Q3: What is the advantage of turn-out bale discharging?

Turn-out bale discharging is simple, reliable, and convenient for daily operation. It allows the finished bale to be discharged easily without a complicated automatic pushing system.

Q4: Can the bale size be adjusted?

The standard bale size is 250–450×250×250mm. The final bale length may vary depending on the material feeding volume and compression condition. Customization can be discussed according to customer requirements.

Q5: Why choose hand valve control?

Hand valve control is easy to learn, stable, and cost-effective. It is suitable for customers who want simple operation, easy maintenance, and reliable daily production without complicated electrical control systems.