Scratch Resistant Coextrusion WPC Fencing Panels 20mm Long Lifespan

Product Specification

Scratch resistant long lifespan coextrusion WPC fence

Product Summary

This premium breakdown introduces the scratch resistant, long lifespan coextrusion WPC fence designed for high-traffic and high-standard projects. Utilizing a modified engineering-grade polymer cap, the surface delivers exceptional Shore hardness to withstand pet scratching and daily impacts. This overview directly addresses common points like surface wear and premature aging, providing a long-term property appreciation solution for premium residential boundaries and public commercial landscapes.

Product Features

• Heavy Duty Scratch Resistance

•  The outer co-extruded shield features a modified high-density polymer matrix. This engineering-grade surface provides exceptional scratch and scuff resistance, ensuring that wind-blown debris, backyard pets, and lawn maintenance tools will not leave permanent, unsightly marks. 

• Ultra Long Engineering Lifespan

•  Built to outperform, this second-generation composite fence delivers a lifespan of 25 to 30+ years. The chemical and physical bonding between the shield and the composite core prevents structural degradation, rotting, and warping, eliminating the need for replacement every few years. 

• Structural Integrity Under Impact

•  Combining a high-strength wood-fiber core with a durable resilient cap, the fence profiles maintain high dimensional stability. It resists sag, bending, and structural fatigue under high winds or accidental impacts, proving its worth as a long-lifespan perimeter.

Technical Specification

Certification

How to Install

Method 1: In-Ground / Dig-In Installation

[Applicable Scenario] Soft ground surfaces such as gardens, lawns, soil, or sandy ground. This is the most stable method for outdoor fencing.

1. Measurement, Layout, and Alignment: Stretch a string line according to the standard span of the fence (typically 1.8 m) to mark the exact center point of each post. Precision in spacing is critical; otherwise, the fence boards will not fit into the post slots.

2. Digging Post Holes: Dig foundation holes at the marked locations. Standard requirement: Hole diameter is generally 300 mm, with a depth of 500 mm - 600 mm (in cold regions, the depth must extend below the frost line).

3. Setting Posts and Pouring Concrete: Insert the WPC posts (or composite posts with internal steel/aluminum reinforcements) into the holes. Pour in mixed concrete (Grade C20 or above). Key Step: Use a spirit level to repeatedly check and adjust the post in two vertical directions to ensure it is 100% plumb.

4. Curing and Waiting: Temporarily secure the leveled posts with bracing timber and allow the concrete to cure. Typically, a waiting period of 24 to 48 hours is required to ensure the concrete has fully hardened before proceeding with board assembly.

Method 2: Bolt-Down with Base Plate

[Applicable Scenario] Pre-hardened ground surfaces such as concrete slabs, concrete foundations, or brick/stone patios.

1. Positioning and Marking: Align the string line on the hardened ground. Determine the exact position of the post base plates based on the net length of the fence board (e.g., 1750 mm plus the post slot depth). Mark the drill holes through the base plate using a marker.

2. Drilling: Use an impact drill equipped with a drill bit that matches the expansion anchors (usually 12 mm or 14 mm in diameter). Drill vertically into the concrete to a depth of 80 mm - 100 mm. Clean out all dust and debris from the holes.

3. Installing and Securing the Metal Base: Align the galvanized steel or aluminum post support base over the drilled holes. Insert the metal expansion anchor bolts or chemical anchors, and tighten them securely using a socket wrench to anchor the base firmly to the concrete.

4. Sleeving the WPC Post: Slide the outer hollow WPC post sleeve from top to bottom over the fixed metal base plate, then lock the inner and outer layers together at the bottom using self-tapping screws.

Application Gallery

Colors

Our Factory

FAQ

Q1: How does a scratch resistant cap protect the coextrusion WPC fence from big pets?

A1: The outer polymer shield is engineered with a high Shore D hardness rating, making it significantly tougher than cedar or pine. Large dogs' claws might scuff ordinary wood, but they cannot break through this hardened co-extruded layer, keeping the perimeter looking immaculate. 

Q2: What design features contribute directly to the long lifespan of this WPC fence?

A2: The long lifespan is achieved because the 360-degree cap completely encapsulates the inner core, shielding it from moisture, UV rays, and biological threats. By removing the root causes of wood rot and composite breakdown, the fence structurally outlasts traditional fencing by decades. 

Q3: Will the scratch resistant surface become brittle and crack as it approaches its maximum lifespan?

A3: No. The engineering outer shell includes advanced anti-aging agents and flexible polymers that maintain elasticity over time. It will not become brittle, crack, or peel, even after decades of seasonal freeze-thaw cycles and hot summer exposure. 

Q4: Is a long lifespan coextrusion fence a better commercial investment than standard vinyl fencing?

A4: Yes. While vinyl fencing can become brittle, yellow, and crack under severe sun or physical impacts, coextrusion WPC offers far superior impact resistance and thermal stability. Its 30-year lifespan and premium aesthetics deliver a much higher commercial property ROI with zero repair costs.