Eco Composite Wood Textured WPC Fence Panel 160*20mm

Product Specification

160mm*20mm Classic Eco-Composite Wood-Textured Outdoor WPC Fence Panel

Product Summary

This specification details a first-generation classic composite fencing system engineered to provide a cost-effective, solid perimeter solution for large-scale landscape developments and residential properties. Manufactured under high temperature and pressure, the homogeneous core blends recycled natural hardwood fibers with premium polymers into a single-layer matrix without an outer cap. This classic composite profile eliminates the severe rotting, twisting, and cracking common to traditional pressure-treated timber fences. Featuring uniform multi-tonal pigmentation throughout the entire thickness and a brushed matte dual-sided finish, this product serves as the definitive budget-friendly, low-maintenance upgrade for modern green building and site perimeters.

About this Product

• Homogeneous Multi-Tonal Solid Structure 

  • Formulated as a single-layer composite matrix, the fence features uniform coloration from the surface to the core, allowing for effortless localized sanding or trimming during site installation without losing its tone.

• Optimized High Cost-Efficiency 

  • Providing heavy-duty physical strength at a highly competitive pricing point, this first-generation fence serves as the perfect substitute for natural wood, squeezing project material costs down for large boundaries.

• Splinter-Free Pedestrian Safety 

  • Unlike pressure-treated pine that dries, cracks, and forms sharp needles, this WPC matrix locks wood fibers inside a plastic web, eliminating dangerous wood splinters to protect children and pets.

•  Zero-Paint Fungal Resistant Core

  • Infused with deep chemical-stabilizers during raw mixing, the profile entirely avoids annual painting or oiling cycles while naturally deterring boring pests and subterranean termites.

Technical Specification

Certification

How to Install

Method 1: In-Ground / Dig-In Installation

[Applicable Scenario] Soft ground surfaces such as gardens, lawns, soil, or sandy ground. This is the most stable method for outdoor fencing.

1. Measurement, Layout, and Alignment: Stretch a string line according to the standard span of the fence (typically 1.8 m) to mark the exact center point of each post. Precision in spacing is critical; otherwise, the fence boards will not fit into the post slots.

2. Digging Post Holes: Dig foundation holes at the marked locations. Standard requirement: Hole diameter is generally 300 mm, with a depth of 500 mm - 600 mm (in cold regions, the depth must extend below the frost line).

3. Setting Posts and Pouring Concrete: Insert the WPC posts (or composite posts with internal steel/aluminum reinforcements) into the holes. Pour in mixed concrete (Grade C20 or above). Key Step: Use a spirit level to repeatedly check and adjust the post in two vertical directions to ensure it is 100% plumb.

4. Curing and Waiting: Temporarily secure the leveled posts with bracing timber and allow the concrete to cure. Typically, a waiting period of 24 to 48 hours is required to ensure the concrete has fully hardened before proceeding with board assembly.

Method 2: Bolt-Down with Base Plate

[Applicable Scenario] Pre-hardened ground surfaces such as concrete slabs, concrete foundations, or brick/stone patios.

1. Positioning and Marking: Align the string line on the hardened ground. Determine the exact position of the post base plates based on the net length of the fence board (e.g., 1750 mm plus the post slot depth). Mark the drill holes through the base plate using a marker.

2. Drilling: Use an impact drill equipped with a drill bit that matches the expansion anchors (usually 12 mm or 14 mm in diameter). Drill vertically into the concrete to a depth of 80 mm - 100 mm. Clean out all dust and debris from the holes.

3. Installing and Securing the Metal Base: Align the galvanized steel or aluminum post support base over the drilled holes. Insert the metal expansion anchor bolts or chemical anchors, and tighten them securely using a socket wrench to anchor the base firmly to the concrete.

4. Sleeving the WPC Post: Slide the outer hollow WPC post sleeve from top to bottom over the fixed metal base plate, then lock the inner and outer layers together at the bottom using self-tapping screws.

Colors

Our Factory

FAQ

Q1: As a first-generation outdoor WPC fence without a co-extrusion shield, will its color fade when exposed to the sun?

A1: Yes, all first-generation WPC products will experience a natural "color weathering" process during the first 3 to 6 months of outdoor exposure as the surface wood fibers adapt to UV light. After this short period, the color stabilizes completely, reaching its permanent, natural matte tone that will look beautiful and consistent for the rest of its lifespan.

Q2: Does this classic composite fencing board feel plastic-like or look artificial under natural outdoor daylight?

A2: Not at all. Because our first-generation formulation contains a high proportion of real hardwood waste fibers (≥ 55%) and the surface is finished with professional steel-wire brushing, it has a distinctly rich, organic timber texture. It diffuses natural sunlight perfectly, offering an authentic, warm wood feel without any synthetic plastic shine.

Q3: Can we install these first-generation WPC panels directly horizontally between brick masonry pillars?

A3: Yes, you can. When installing horizontally between brick masonry or concrete columns, you must use our dedicated aluminum or WPC side-u-channels fixed to the pillars. Because first-generation profiles expand and contract slightly with temperature shifts, you must leave a 5mm-8mm expansion gap inside the channels to keep the fence perfectly flat.

Q4: How do I clean stubborn mud stains or bird droppings off this non-capped WPC fence?

A4: Cleaning is very straightforward. For daily dust and light dirt, a simple rinse with a garden pressure hose or a power washer will do the trick. For stubborn dried mud or organic bird droppings, you can easily scrub the spots with a stiff-bristled brush using warm soapy water along the direction of the brushed grain, and it will wash clean away.