Air Cooled Hybrid ESS 20 Ft Containerized Battery Storage 625-1250 KW / 1300

Product Overview

A 20-ft platform for factories, larger commercial campuses and energy-intensive sites that need 1300-2600 kWh of storage. Four configurations allow project teams to compare output power, energy, solar interfaces and installation weight within one product family.

YINTU is an energy storage solution provider. We work with capable manufacturing partners to select equipment, coordinate technical information and develop a configuration around the customer's site requirements. The listed product is a configurable platform; the supply and service boundaries are agreed for each project.

How Solar, Storage and Charging Work Together

Solar generation can serve site demand while storage shifts selected energy to later periods. The PCS connects the DC battery system with AC loads, and EMS coordination supports the chosen operating schedule and reserve policy. External EV charging equipment can be included in the site solution after its rating, quantity, charging interface and control compatibility are selected.

The 1250 kW configuration uses an external PV inverter. Other configurations use integrated MPPT; internal MPPT limits do not apply to the external-inverter version.

The generator port provides an interface for an external diesel generator where required. Grid and generator operation, switchgear and source-transfer logic follow the approved electrical design. AC/DC integration here describes the storage and conversion architecture; the specification does not state built-in EV charging guns or a direct DC EV charging output.

Key Features

AC and DC equipment integrated around one control platform

LiFePO4 batteries, BMS, PCS and EMS are integrated with a generator port. The battery operates on the DC side and the PCS provides the AC interface. This creates a coordinated equipment platform for solar-storage charging projects while the site distribution, protection and external chargers are designed as part of the complete solution.

PV integration matched to the selected configuration

The 1250 kW configuration uses an external PV inverter. Other configurations use integrated MPPT; internal MPPT limits do not apply to the external-inverter version.

On-grid and off-grid operation

The datasheet lists rated power for both modes and a switching time below 10 ms. The project design coordinates the grid connection, generator, essential loads and transfer arrangement. This rating should not be treated as a universal no-interruption guarantee for every load.

Thermal management and protection

The IP54 enclosure combines air conditioning for the battery with intelligent PCS cooling and an integrated fire protection system. The quoted operating temperature is -10 to +55 C, with humidity from 5% to 95% and altitude <2000 m.

Expandable project architecture

The series supports multiple units in parallel; the datasheet does not specify a universal maximum count. Parallel operation requires a coordinated control, communication, cable and protection design.

Applications and Project Value

Industrial parks and large factories

Match one of four power-and-energy combinations to production demand and solar availability. Storage can shift PV energy toward later processes, help manage demand peaks and reserve capacity for selected essential loads.

Logistics depots and fleet charging

Combine warehouse or carport PV with external charging equipment. The operating plan balances vehicle schedules, charger concurrency and other facility loads, using storage to redistribute energy across the day rather than assuming every charger can run at full power simultaneously.

Large commercial and retail facilities

Coordinate air conditioning, refrigeration, lighting and charging demand across a larger site. Select the required 625-1250 kW output and 1300-2600 kWh energy combination from the table, then validate dispatch against the electricity tariff and connection limits.

Remote industrial and island microgrids

Integrate solar, storage and generator support to serve a site beyond a strong grid. Multiple containers can be considered in an engineered parallel arrangement; reserve policy, fault protection and generator operation are project-specific.

Configuration Comparison

The 1250 kW configuration uses an external PV inverter. Other configurations use integrated MPPT; internal MPPT limits do not apply to the external-inverter version.

Power and energy are paired configurations, not independent values that can be freely mixed. Battery energy, voltage and ampere-hour values are reproduced as specified; practical usable energy and backup time depend on the final operating limits and site load. PV current notation is preserved as 200 A multiplied by the stated channel count.

System and Installation Parameters

Dimensions retain the order used in the supplied datasheet; axis labels are not inferred. Weights are approximate and vary with configuration. Confirm the final installation drawing, lifting plan, foundation loading, service clearances and cable routing before deployment.

YINTU Project Selection and Supply Scope

Start with the country and site environment, grid voltage, interval load profile, PV array or existing inverter information, generator details and backup priorities. For a charging project, add charger power, vehicle schedule and expected simultaneous demand. YINTU coordinates configuration selection and technical clarification with the manufacturing partner.

The proposal defines the selected storage configuration, controls, switchgear and any project accessories. PV modules, external PV inverters where needed, diesel generators, EV chargers, civil works, transport, installation and commissioning are included only when listed in the agreed scope. Certification documents, warranty, pricing, lead time and payment terms are confirmed for the selected model and destination.

Frequently Asked Questions

Are EV chargers built into the container?

The supplied datasheet describes a PV-storage-diesel microgrid platform and does not specify built-in charging guns or charger ratings. YINTU can coordinate a solar-storage charging solution using separately selected EV chargers and a suitable site distribution and control design.

Can PV strings connect directly?

The 1250 kW configuration uses an external PV inverter. Other configurations use integrated MPPT; internal MPPT limits do not apply to the external-inverter version.

Can it operate when the grid is unavailable?

The series includes off-grid ratings and a stated switching time below 10 ms. The final design must establish the supported loads, reserve, source-transfer arrangement and generator coordination where used.

How many units can be connected in parallel?

Multiple units; project-specific quantity. The final quantity and control arrangement must be confirmed for the project.

What determines backup duration?

The selected energy configuration, usable SOC window, reserve policy, conversion and auxiliary losses, temperature and changing site demand all affect runtime. Nominal kWh alone is not a guaranteed AC energy delivery or backup duration.

Technical source: YT-Hybrid ESS-625-1250kW-1300-2600kWh-Air datasheet, V1.0, October 2026. Final specifications and included equipment follow the approved project configuration.