China factories

China factory - Guangzhou Weitan Trading Co.,Ltd.

Guangzhou Weitan Trading Co.,Ltd.

  • China,Guangzhou ,Guangdong
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement

About Us

Products

Guangzhou Weitan Trading Co.,Ltd.

We are a manufacturer specializing in high-performance carbon fiber automotive parts, focusing on the research and development, mold making, production, and export of dry carbon kits for high-performance vehicles. Our main products are exterior dry carbon parts for BMW G series, F series, and other chassis, including front lips, side skirts, rear diffusers, tailwings, engine covers, air intakes, and interior carbon components.

Since our inception, we have rejected low-cost wet carbon processes and adhered to vacuum hot-pressed dry carbon molding, ensuring lightweight, high strength, consistent texture, and paint stability of our products. We possess independent mold-making capabilities, offering both standardized mass-produced stock and support for OEM/ODM custom development. We undertake exclusive customer styles, brand labeling, small-batch trial orders, and large-scale overseas full container orders.

Our customers span the globe: overseas tuning dealers, independent online sellers, offline tuning shops, performance car clubs, and tuning brands. We prioritize precision alignment, protective packaging, timely delivery, and after-sales support, ensuring every set of carbon components is installed with ease and presents a premium appearance.

  • China Factory - Guangzhou Weitan Trading Co.,Ltd.
  • China Factory - Guangzhou Weitan Trading Co.,Ltd.
  • China Factory - Guangzhou Weitan Trading Co.,Ltd.
  • China Factory - Guangzhou Weitan Trading Co.,Ltd.
  • China Factory - Guangzhou Weitan Trading Co.,Ltd.

Basic Information

Company Name: Guangzhou Weitan Trading Co.,Ltd.
Business Type: Manufacturer
Brands: ZERO
Employee Number: 100~500
Year Established: 2013
Total Sales Annual: 30000000-50000000
Company Location: Next to the Investment Attraction and Operation Center of Tangxia Zhihui PARK, No. 6, Bohui Street, Guangyuan East Road, Tianhe District, Guangzhou City, Guangdong Province, China
Factory Location: Room 401, Building 5, No. 1, Huaxia Third Road, Huaxia Industrial Zone, Langxia Village, Qiaotou Town, Dongguan City, Guangdong Province, China

Trade & Market

Company slogan: Your trusted B2B supplier of high‑performance carbon fiber auto parts. Quality supply, seamless partnership.
Production Line:
END-TO-END IN-HOUSE MANUFACTURING

Inside Our 6-Stage Aerospace Production Line

Every stage is executed under one roof—giving us total control over tooling geometry, resin-to-fiber ratios, autoclave pressure curves, and UV clear-coat depth.

STEP 01 3D Reverse Engineering

3D Laser Scanning & CAD Reverse Engineering

Every aero component begins with a high-precision 3D laser scan of the actual OEM vehicle chassis and mounting clips. Our engineers map every curve and fastener point in CAD down to a ±0.2mm tolerance, eliminating the warping, gaps, and drilling headaches common in low-grade aftermarket parts.

0.02mm Scanner Resolution OEM Clip Mapping
CAD_MESH_SCANNER // OEM_CHASSIS_DATUM ±0.2mm VERIFIED
OEM_CLIP_A OEM_CLIP_B OEM_CLIP_C
???? FACTORY PHOTOGRAPHY BRIEF — STEP 01

Shoot a close-up of the engineer's workstation monitor displaying the 3D point-cloud scan alongside the CAD reverse-engineered surface model, or a handheld red laser scanner projecting grid lines onto an OEM bumper.

???? FACTORY PHOTOGRAPHY BRIEF — STEP 01

Shoot a close-up of the engineer's workstation monitor displaying the 3D point-cloud scan alongside the CAD reverse-engineered surface model, or a handheld red laser scanner projecting grid lines onto an OEM bumper.

5_AXIS_CNC_MILLING // 6061-T6_BILLET ZERO THERMAL WARP
OUR TOOLING
6061 Aircraft Aluminum
1,000+ cycles without deformation. Razor-sharp aero creases.
REPEATABILITY: 99.98%
COMPETITOR FRP MOLD
Cheap Fiberglass Mold
Warps after 30-50 heat cycles, causing wavy reflections & gaps.
HIGH SHRINKAGE
???? FACTORY PHOTOGRAPHY BRIEF — STEP 02

Shoot a crisp macro photo of a freshly milled, bright silver 6061 aluminum mold block with a digital vernier caliper or feeler gauge resting on the machined cavity edge.

STEP 02 Billet Aluminum Tooling

5-Axis CNC Billet Aluminum Mold Milling

Unlike cheap fiberglass molds that warp after a few dozen cycles, we mill our production molds from solid blocks of 6061 aircraft-grade aluminum. This guarantees razor-sharp body lines, mirror-symmetrical weave alignment, and 100% consistency from the first unit to the thousandth.

5-Axis Simultaneous Milling Symmetrical V-Weave Alignment
STEP 03 Aerospace Prepreg Layup

Hand-Laid Japanese Toray® Prepreg Carbon Fiber

We exclusively use genuine 3K 2x2 twill and forged prepreg carbon fiber sourced from Toray®. Because the resin is pre-impregnated at the factory at an exact ratio, our master technicians can hand-lay every sheet with uniform weave tension—achieving maximum strength-to-weight ratio with zero dry spots.

38% Exact Resin Content Zero Fiberglass Fillers
INTERACTIVE WEAVE INSPECTOR
TORAYCA® 3K 2x2 TWILL PREPREG
Classic OEM Motorsport Diagonal Weave
Matched to BMW M, Porsche GT & Ferrari factory carbon weaves
200g/m²
???? FACTORY PHOTOGRAPHY BRIEF — STEP 03

Shoot the authentic TORAY® label inside the raw prepreg roll core, paired with a clean close-up of a technician wearing white lint-free gloves carefully aligning the 2x2 twill weave into the aluminum mold.

AUTOCLAVE_PLC_CONTROLLER // CYCLE_ACTIVE VACUUM SEAL: OK
CORE TEMP
130.0°C
266°F STEADY
CHAMBER PRESS
6.0 BAR
0.60 MPa
VACUUM BAG
-0.98
BAR NEGATIVE
RESIN CONSOLIDATION & AIR EXTRACTION 0% VOID CONTENT

???? FACTORY PHOTOGRAPHY BRIEF — STEP 04

Shoot a wide-angle shot of vacuum-bagged molds being rolled into the massive industrial autoclave chamber, plus a sharp close-up of the digital control screen reading 130°C and 0.6 MPa (6 Bar).

STEP 04 True Dry Carbon Curing

High-Pressure Autoclave Curing (True Dry Carbon)

Sealed in vacuum bags and cured inside our industrial autoclaves at 130°C (266°F) and 6 bar of pressure, excess resin is extracted and microscopic air pockets are completely eliminated. The result is pure, ultra-lightweight dry carbon capable of withstanding extreme engine bay heat and track-day stress.

150°C+ Thermal Stability Zero Pinholes or Bubbling
STEP 05 Trimming & UV Finishing

Robotic Waterjet Trimming & Multi-Stage UV Clear Coat

After demolding, robotic waterjet cutters trim every edge and mounting tab with surgical precision. Each part then receives three layers of automotive-grade, high-solid UV-inhibiting clear coat (available in High-Gloss or Satin Matte), wet-sanded and hand-polished to a deep, glass-like luster that resists yellowing and rock chips.

3-Coat Automotive Clear High-Gloss or Satin Matte
UV CLEAR COAT FINISH SELECTOR
FINISH: 3-LAYER HIGH-GLOSS UV CLEAR UV400 BLOCK
Wet-Sanded & Hand-Polished Show-Car Depth
95+ GU gloss rating with anti-yellowing UV absorbers & stone-chip resistance
???? FACTORY PHOTOGRAPHY BRIEF — STEP 05

Shoot a technician inside the downdraft paint booth spraying clear coat, plus an angled macro shot showing overhead LED light bars reflecting razor-straight across a polished carbon hood or spoiler.

FINAL_QC_PROTOCOL // SERIALIZED_TAG PASSED 12/12
✓ OEM Master Jig Fitment
✓ Weave Symmetry Check
✓ Clear Coat Micron Gauge
✓ Mounting Clip Pull-Test
✓ Zero Pinhole / Optical Scan
✓ Custom EPE Foam Crate
???? FACTORY PHOTOGRAPHY BRIEF — STEP 06

Shoot a QC specialist test-fitting a finished carbon fiber front lip or mirror cap onto an OEM bumper/fixture while checking panel gap uniformity with a precision feeler gauge.

STEP 06 Test-Fitment & Packaging

12-Point QC & Physical Test-Fitment Before Shipping

Before packaging, every single piece undergoes a strict 12-point inspection covering weave symmetry, clear coat thickness, and structural integrity. We test-fit parts directly onto OEM master jigs and donor vehicles—ensuring that when you unbox your order, installation is strictly plug-and-play.

Individual Serialized QC Card Drop-Tested Export Crating
Our Team:
Company Team
History:
Company History
Service:
Company Service

Factory Information

Market name: Worldwide
Contact Person: Mr Liao

Explore more categories

  1. China BMW

    BMW

    1 products available

  2. China G87 M2

    G87 M2

    17 products available

  3. China F87 M2/M2C

    F87 M2/M2C

    5 products available

  4. China Other

    Other

    1 products available

  5. View All Categories

Get in touch with us

  • Reach Us
  • Guangzhou Weitan Trading Co.,Ltd.
  • Next to the Investment Attraction and Operation Center of Tangxia Zhihui PARK, No. 6, Bohui Street, Guangyuan East Road, Tianhe District, Guangzhou City, Guangdong Province, China
  • https://www.zeroinfx.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement