| Packaging Details | Export-grade wooden case with stretch film and shock-proof foam, apex and vortex finder packed separately |
| Payment Terms | T/T,L/C,PayPal,Western Union |
| Feed Head | Replaceable PU, tangential inlet |
| Vortex Finder Range | 65 / 75 / 85 mm replaceable |
| Body Weight | 38 kg assembled |
| Delivery Time | 7-15 days for stock, 20-30 days for production |
| Supply Ability | 300 Sets per Month |
| Cone Diameter | 250 mm (10 inch) |
| Installation | Bolt-on flange or quick clamp, frame or skid mounted |
| Wearing Parts | Apex spigot, vortex finder, one-piece liner, gaskets |
| Nominal Feed Capacity | 25 - 35 t/h at 0.1 MPa |
| Apex Spigot Range | 25 / 32 / 40 mm replaceable |
| Model Number | HC-PU-250 |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
| Place of Origin | Chengdu, China |
View Detail Information
Explore similar products
500mm Dewatering Hydrocyclone Wear Resistant Underflow Spigot PU Liner Tailings
125mm Hydrocyclone Cluster Lightweight PU Liner Fine Particle Classification 8
Mineral Slurry Classification 60m3/H Hydrocyclones 380mm Desanding Hydrocyclone
75mm Desliming Hydrocyclone Hydrolysis Resistant PU Liner Clay
Product Specification
| Packaging Details | Export-grade wooden case with stretch film and shock-proof foam, apex and vortex finder packed separately | Payment Terms | T/T,L/C,PayPal,Western Union |
| Feed Head | Replaceable PU, tangential inlet | Vortex Finder Range | 65 / 75 / 85 mm replaceable |
| Body Weight | 38 kg assembled | Delivery Time | 7-15 days for stock, 20-30 days for production |
| Supply Ability | 300 Sets per Month | Cone Diameter | 250 mm (10 inch) |
| Installation | Bolt-on flange or quick clamp, frame or skid mounted | Wearing Parts | Apex spigot, vortex finder, one-piece liner, gaskets |
| Nominal Feed Capacity | 25 - 35 t/h at 0.1 MPa | Apex Spigot Range | 25 / 32 / 40 mm replaceable |
| Model Number | HC-PU-250 | Certification | ISO 9001, ISO 14001, ISO 45001 |
| Place of Origin | Chengdu, China | ||
| High Light | 250mm Hydrocyclone Sand Washing ,Hydrocyclone Sand Washing 30t/H ,30t/H Hydrocyclone In Mineral Processing | ||
250mm Hydrocyclone PU One Piece Liner Sand Washing Desliming 30 t/h Feed Capacity
Sand washing plants lose money twice when a cyclone liner fails: once on the spare itself, and again on the downtime while a crew cuts out a worn section and patches it. This 250 mm unit removes the second loss by casting the whole inner chamber as a single polyurethane body, so there is no joint, no seam and no patch line for fine sand to attack.
The inlet head, cylindrical section, cone and apex seat are moulded from one continuous cast, then bonded into a steel shell. Slurry never meets a bonded overlap, which is where conventional sectional liners start to peel. Because the liner carries the wear, the outer shell stays clean and can be reused across two or three liner life cycles.
Apex and vortex finder are both replaceable PU parts with matching seat geometry. Operators can shift the cut point to follow changes in feed solids without swapping the whole cyclone, and the PU surface keeps the internal diameter true far longer than steel, so the grading curve drifts little between shutdowns.
The PU liner and thin-wall shell bring the bare unit into a two-person lift on most skid frames. Flange or quick clamp connection means a unit can be changed out during a normal maintenance window rather than a planned plant stop. Polyurethane also shrugs off the constant water contact of a washing circuit, so hydrolysis is not a service factor.
Shipments can combine assembled cyclones with a matching spares kit: apex spigots, vortex finders, liners, feed chambers and gaskets. Every unit is built under ISO 9001, ISO 14001 and ISO 45001 certified production.
| Liner Type | One-piece hot cast polyurethane (PU) liner |
| Liner Hardness | 88 - 92 Shore A |
| Housing Material | Carbon steel with anti-corrosion coating, SS304 optional |
| Feed Pressure | 0.06 - 0.25 MPa |
| Separation Range | 10 - 150 µm |
| Classification Efficiency | ≥ 85% |
| Underflow Spigot | Replaceable PU spigot, ceramic option |
| Overflow Vortex Finder | Replaceable PU vortex finder |
| Hydrolysis Resistance | ≥ 85% tensile retention after 168 h immersion at 70 ℃ |
| Corrosion Resistance | pH 2 - 13 slurry with chloride bearing water |
| Process Connection | Bolt-on flange / quick clamp, DN50 - DN200 |
| Spare Parts Kit | Apex spigot, vortex finder, inner liner, feed chamber, gaskets |
Silica and natural sand washing, desliming ahead of a dewatering screen, and fines recovery where a steady 10 - 150 µm cut matters more than raw throughput.
Send your feed curve, solids content and target cut size, and we will confirm the apex and vortex finder combination for your circuit.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!