Wireless Network 2 Way Pallet Shuttle For High Density Warehouse Racking Systems

The two-way pallet shuttle is an automated pallet handling unit designed for high-density warehouse racking systems. It travels forward and backward within a single rack lane to complete pallet storage, retrieval, lifting, positioning, and placement.

The WF configuration supports wireless network communication, allowing the shuttle to be used in warehouse automation systems requiring wireless equipment communication. The system supports rated loads of 1200 / 1500 kg, unloaded travel speed of 60–72 m/min, and loaded travel speed of 36–54 m/min.

The shuttle uses a DC servo motor, mechanical screw lifting structure, and LiFePO4 battery, with FIFO/LIFO storage modes and manual or automatic operation.

High-density warehouse racking systems commonly require:

• high-density pallet storage
• wireless equipment communication
• deep-lane pallet storage and retrieval
• FIFO or LIFO inventory management
• automatic pallet handling
• different pallet sizes and rack configurations
• continuous battery-powered operation
• ambient or low-temperature operation

The wireless network version is suitable for warehouse projects where two-way pallet shuttles need to communicate through a wireless network rather than relying only on the standard RF remote-control configuration.

The two-way pallet shuttle operates on dedicated rails installed inside the pallet racking system. After receiving an operating command, the shuttle travels to the designated pallet position and performs storage or retrieval operations.

The vehicle uses a DC servo motor and mechanical screw lifting structure, with a maximum lifting height of 50 mm.

The battery uses LiFePO4 technology with 24 / 48 VDC voltage and 30 / 52 Ah capacity. The WF configuration uses wireless network communication, while the standard configuration uses a 433 MHz RF remote controller.

The shuttle supports automatic storage and retrieval, specified quantity handling, pallet arrangement, inventory counting, emergency braking, automatic return, and low-power standby.

• Rated load capacity: 1200 / 1500 kg
• Unloaded travel speed: 60–72 m/min
• Loaded travel speed: 36–54 m/min
• Maximum lifting height: 50 mm
• Lifting type: Mechanical Screw Lifting
• Motor type: DC Servo
• Battery type: LiFePO4 Battery
• Battery voltage: 24 / 48 VDC
• Battery capacity: 30 / 52 Ah
• Charging time: Approx. 3 h
• Continuous operating time: Approx. 8 h
• Remote frequency: 433 MHz
• Straight-line remote distance: 100 m
• Storage mode: FIFO / LIFO
• Communication mode: RF Remote Control / Wireless Network
• Operating environment: Ambient / Low Temperature
• Control functions: Manual / Automatic
• Customization: Standard / Customized Model

This page refers specifically to the wireless network configuration of a two-way pallet shuttle for high-density pallet racking systems.

It is mainly suitable for:

• high-density pallet warehouses
• deep-lane pallet storage
• automated pallet storage and retrieval
• FIFO or LIFO storage
• food raw material warehouses
• finished goods warehouses
• cold-chain warehouses
• warehouse automation systems requiring wireless communication

The WF designation indicates wireless network communication. Actual network architecture, communication range, system interface, and integration requirements should be confirmed according to the warehouse automation project.

The WF designation indicates wireless network communication, while an unmarked communication configuration uses an RF remote controller.

The available rated load capacities are 1200 kg and 1500 kg.

The unloaded travel speed is 60–72 m/min, while the loaded travel speed is 36–54 m/min.

The battery uses LiFePO4 technology with 24 / 48 VDC voltage and 30 / 52 Ah capacity.

Available pallet configurations include 1200*1000, 1200*800, 1200*1100, 1200*1200, 1000*1200, 1100*1100, 1300*1300, and 1300*1100 mm.

The WF configuration supports wireless network communication for warehouse automation applications.

Available operating functions include:

• wireless network communication
• automatic storage and retrieval
• specified quantity storage and retrieval
• manual forward and reverse travel
• manual lifting and lowering
• emergency braking
• automatic return to initial position
• low-power standby
• inventory quantity counting
• pallet arrangement
• vehicle rescue
• audible positioning

The system also supports RF remote control in the corresponding standard configuration.

1. Wireless Network CommunicationThe WF configuration provides wireless network communication for two-way pallet shuttle applications in automated warehouse systems.
2. High-Density Pallet StorageThe shuttle operates within the rack lane and is suitable for high-density pallet racking systems.
3. 1200–1500 kg Load OptionsThe system provides 1200 kg and 1500 kg rated load configurations.
4. FIFO and LIFO Storage SupportBoth FIFO and LIFO storage modes are available for different warehouse inventory strategies.
5. Flexible Battery ConfigurationThe shuttle uses a LiFePO4 battery with 24 / 48 VDC voltage and 30 / 52 Ah capacity, with approximately 3 hours charging time and approximately 8 hours continuous operating time.

1. What does WF mean in the two-way pallet shuttle model?WF indicates the wireless network communication configuration.
2. Can the wireless network shuttle be used in high-density racking systems?Yes. The two-way pallet shuttle is designed to operate inside rack lanes for high-density pallet storage.
3. What load capacity does the shuttle support?The available rated load capacities are 1200 kg and 1500 kg.
4. What is the travel speed of the shuttle?The unloaded travel speed is 60–72 m/min, while the loaded travel speed is 36–54 m/min.
5. Can the wireless network model be customized?Yes. The PDF provides standard and NS customized configurations, with different pallet sizes, rail specifications, operating environments, and communication modes available.