1200kg Remote Controlled Two-Way Pallet Shuttle for Deep-Lane Pallet Storage

The two-way pallet shuttle is an automated pallet handling unit designed for deep-lane and high-density pallet storage systems. It travels forward and backward within a single rack lane to complete pallet storage, retrieval, lifting, positioning, and placement.

This model supports rated loads of 1200 kg and 1500 kg, with unloaded travel speed of 60–72 m/min and loaded travel speed of 36–54 m/min. The standard configuration uses a 433 MHz RF remote controller, with a stated straight-line remote control distance of 100 m.

The shuttle supports FIFO and LIFO storage modes, automatic and manual operation, specified quantity handling, pallet arrangement, inventory counting, vehicle rescue, audible positioning, and low-battery automatic return.

In deep-lane pallet storage systems, common operational requirements usually include:

• high pallet storage density
• multiple pallet positions within the same storage lane
• deep-lane pallet storage and retrieval
• FIFO or LIFO inventory rotation
• reduced forklift movement inside storage lanes
• remote pallet handling
• different pallet sizes and rack configurations
• inventory counting and pallet position adjustment

The two-way pallet shuttle performs pallet movement directly inside the storage lane, making it suitable for warehouse layouts where pallets need to be stored at multiple depths within the racking system.

Remote control also allows operators to issue movement, lifting, lowering, and emergency braking commands without entering the storage lane.

The two-way pallet shuttle operates on dedicated rails installed inside the pallet racking system. After receiving a task from the system or remote controller, the shuttle travels to the target position, lifts or lowers the pallet, completes the storage or retrieval operation, and returns to the initial position after the task.

The shuttle uses a DC servo motor, mechanical screw lifting mechanism, and LiFePO4 battery. The maximum lifting height is 50 mm.

The standard communication configuration uses a 433 MHz RF remote controller. WF models support wireless network communication. When no task is assigned, the shuttle can automatically enter a low-power sleep mode while remaining ready for the next command.

• Rated load capacity: 1200 / 1500 kg
• Unloaded travel speed: 60–72 m/min
• Loaded travel speed: 36–54 m/min
• Maximum lifting height: 50 mm
• Lifting type: Mechanical Screw Lifting
• Motor type: DC Servo
• Battery type: LiFePO4 Battery
• Battery voltage: 24 / 48 VDC
• Battery capacity: 30 / 52 Ah
• Charging time: Approx. 3 h
• Continuous operating time: Approx. 8 h
• Remote frequency: 433 MHz
• Straight-line remote distance: 100 m
• Storage mode: FIFO / LIFO
• Communication mode: RF Remote Control / Wireless Network
• Operating environment: Ambient / Low Temperature
• Control functions: Manual / Automatic
• Customization: Standard / Customized Model

This page refers to a two-way pallet shuttle operating forward and backward within a single deep storage lane.

It is mainly suitable for:

• palletized goods
• deep-lane pallet storage
• high-density pallet racking
• FIFO or LIFO storage
• 1200 kg or 1500 kg pallet loads
• remote controlled pallet handling
• ambient-temperature warehouses
• low-temperature warehouse applications

Actual suitability should be confirmed according to pallet dimensions, total pallet weight, pallet structure, rack rail configuration, storage lane depth, operating environment, communication method, and inventory strategy.

The product is a two-way single-lane shuttle and does not provide the cross-aisle movement associated with four-way pallet shuttle systems.

1200 kg and 1500 kg are the available rated load configurations and should be selected according to the actual pallet and goods weight.

60–72 m/min refers to unloaded travel speed, while 36–54 m/min refers to loaded travel speed.

The shuttle uses mechanical screw lifting with a maximum lifting height of 50 mm.

Available pallet configurations include 1200*1000, 1200*800, 1200*1100, 1200*1200, 1000*1200, 1100*1100, 1300*1300, and 1300*1100 mm.

The model coding system can identify rail specification, pallet size, operating environment, communication mode, and customized configuration. No environment code indicates ambient operation, while C indicates a low-temperature version. No communication code indicates RF remote control, while WF indicates wireless network communication. NS indicates a customized model.

DSS uses a 50*148 mm rail with double deceleration holes. DSSA uses a 70*163 mm rail, DSSC uses a 70*130 mm rail, and DSSD uses a 50*148 mm rail with baffle-scanning deceleration.

• Deep-Lane Pallet Storage
  Suitable for storage systems with multiple pallet positions arranged within the same rack lane.
• Food Raw Material Storage
  Suitable for palletized food ingredients requiring organized FIFO or LIFO storage.
• Grain and Edible Oil Warehousing
  Used for palletized grain, edible oil, and related raw materials requiring high-density storage.
• Beverage and Daily Consumer Goods Warehousing
  Suitable for palletized beverages, household products, and other finished goods.
• Finished Goods Warehousing
  Applicable to manufacturing and finished-goods warehouses using dense pallet storage lanes.
• Heavy-Duty Panel Storage
  Suitable for palletized panel products where the total pallet load remains within the selected rated capacity.
• Agricultural Materials Storage
  Used for palletized agricultural materials and reserve goods.
• Cold Chain Storage
  A low-temperature shuttle configuration is available for cold-chain and low-temperature warehouse projects.

The two-way pallet shuttle can receive operating commands from a warehouse system or RF remote controller.

Available operating and communication functions include:

• 433 MHz RF remote control
• wireless network communication
• manual forward and reverse travel
• manual lifting and lowering
• emergency braking
• automatic storage and retrieval
• specified quantity storage and retrieval
• automatic return to initial position
• low-power standby mode

The shuttle also supports pallet arrangement, inventory quantity counting, rescue towing, audible positioning, and low-battery automatic return and alarm.

Different pallet sizes, rail specifications, operating environments, communication modes, and customized configurations can be selected according to project requirements.

1. Remote Controlled Deep-Lane Pallet Handling
   The standard 433 MHz remote controller provides a stated straight-line control distance of 100 m and supports forward, reverse, lifting, lowering, and emergency braking operations.
2. High-Density Pallet Storage
   The shuttle travels inside the rack lane, making it suitable for deep-lane storage systems with multiple pallet positions.
3. 1200 kg and 1500 kg Load Options
   Two rated load configurations allow selection according to the total weight of the pallet and stored goods.
4. FIFO and LIFO Storage Support
   The shuttle supports both FIFO and LIFO inventory modes according to the rack layout and pallet access direction.
5. LiFePO4 Battery and Continuous Operation
   The system uses a 24 / 48 VDC LiFePO4 battery with 30 / 52 Ah capacity, approximately 3 hours charging time, and approximately 8 hours continuous operating time.

• Choose by load capacity
  Select 1200 kg or 1500 kg according to the total weight of the pallet and goods.
• Choose by pallet size
  Confirm pallet fork-entry direction and depth and select the corresponding shuttle dimensions.
• Choose by storage lane
  Check rack depth, rail structure, pallet spacing, and access direction before selecting the shuttle configuration.
• Choose by control method
  Use standard 433 MHz RF remote control or select the WF wireless network version according to the project control architecture.
• Choose by operating environment
  For low-temperature warehouse projects, select the C low-temperature configuration and confirm the required operating temperature before final selection.

1. What is the rated load of this two-way pallet shuttle?
   The available rated load capacities are 1200 kg and 1500 kg.
2. How is the shuttle remotely controlled?
   The standard configuration uses a 433 MHz RF remote controller with a stated straight-line control distance of 100 m.
3. Is it suitable for deep-lane pallet storage?
   Yes. The shuttle travels forward and backward within a single rack lane and is designed for multiple pallet positions arranged in depth.
4. Does it support FIFO and LIFO storage?
   Yes. Both FIFO and LIFO modes are supported according to the rack layout and pallet access direction.
5. Can the pallet shuttle be customized?
   Yes. Pallet size, rail configuration, operating environment, communication mode, and non-standard configurations can be selected according to project requirements.