Product Specification

Stainless steel flat head rivets, thin head rivets, hinge sliding support components - high-quality precision hardware products

I. Optimal Rivet Selection Strategy

1. Process: Precise positioning + stable pressure + anti-deformation molds
2. Material: Same-material pairing to reduce electrochemical corrosion
3. Structure: Prioritize stainless steel flat head semi-hollow rivets / pan head rivets / step rivets
4. Cost: Improving first-pass yield > saving on rivet costs

II. Three Major Concerns for Factories

1. Unstable riveting process easily leads to scrapped hinge semi-finished products

    

   Common issues:
    
   • Hinge plate deformation, warping, hole cracking
   • Incomplete, eccentric or cracked rivet heads
   • Misalignment between two hinge plates, stiff or stuck operation
    
   Impact on the factory:

    

   Lower yield, increased rework, insufficient production capacity, higher costs.
    
2. Material mismatch between hinges and rivets causes potential corrosion in later use

    

   Common materials in hinge factories:
    
   • Steel hinges (electroplated)
   • 201/304 stainless steel hinges
   • Aluminum profile accessories
    
   Problems with stainless steel flat head solid rivets:
    
   • Steel hinges + stainless steel rivets → electrochemical corrosion
   • Coastal / humid environments → rust around rivets → customer complaints
   • Semi-finished hinges appear fine when leaving the factory, but rust occurs after 3–12 months of installation
    
   Consequences for the factory:

    

   High after-sales costs, damaged brand reputation, lost customers.
    
3. Finished hinges fail to meet strength and durability requirements

    

   Window and door hinges must withstand:
    
   • Repeated opening and closing (≥50,000 cycles)
   • Sash weight
   • Wind load and vibration
    
   Weaknesses of ordinary solid rivets:
    
   • Insufficient shear strength, easy to loosen over time
   • No buffer in solid structure, leading to noise and play
   • Stress concentration after riveting, easy fatigue fracture of hinge arms
    
   Consequences for the factory:

    

   Failure to pass testing, inability to win project orders, elimination by hardware system suppliers.
    

III. Practical Solutions for Factories (Applicable directly on production lines)

1. Optimize riveting process to reduce hinge deformation
    
   • Control hole diameter: 0.1~0.2mm larger than rivet diameter
   • Use precision positioning molds to ensure riveting concentricity
   • Adopt progressive riveting to avoid excessive one-time impact
   • For thin material hinges: add washers / support blocks to prevent deflection
    
   Goal: No hinge deformation, no rivet cracking, improved first-pass yield.
    
2. Material matching to solve corrosion at the source
    
   • Steel hinges → prefer galvanized steel rivets
   • 201 hinges → match with 201 rivets
   • 304 hinges → match with 304 rivets
   • Aluminum accessories → use aluminum rivets or stainless steel + insulating washers
    
   Principle: Prioritize same materials to reduce potential difference.
    
3. Replace with more suitable rivet types (highly recommended)

    

   From the perspective of window and door hinge semi-finished factories,

    

   stainless steel flat head solid rivets are not the optimal choice.
    
   More suitable structures:
    
   • Semi-hollow / hollow rivets
      
     • Low riveting pressure
     • No hinge deformation
     • Suitable for mass automated production
      
   • Pan head / round head rivets
      
     • Higher shear resistance
     • Less likely to loosen
     • More durable hinges
      
   • Stainless steel two-point rivets / step rivets
      
     • Accurate positioning
     • Smooth opening and closing
     • Commonly used in high-end hinges

IV. Factory Summary (Concise version for reports)

• Process: Precise positioning + stable pressure + anti-deformation molds
• Material: Same-material pairing to reduce electrochemical corrosion
• Structure: Prioritize semi-hollow / pan head / step rivets
• Cost: Improving first-pass yield > saving on rivet costs

We have introduced advanced equipment and technology from Japan and Germany (CNC 5-axis and 6-axis machines) to better serve our customers' needs.

Our maximum processing outer diameter is 60, and the minimum control tolerance is 0.001. We have Japanese CNC Tsugami, CNC Citizen, multi-station cold extrusion forming machines, 500T press machines, casting equipment, and various process equipment, which can effectively provide customers with the best technical solutions.

Our company has a total of 300 employees, including 20 technicians, 10 engineers, and 15 quality control personnel. We have over 300 pieces of equipment.

Our company implements 8S management and has passed ISO9001 and TS16949 automotive certifications.

Our customers include , bo-sch, Foxconn, Motors, Husqvarna, Shimano, NVIDIA, DJI Drones, Siegenia, and Cater-pillar.