Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | original packing |
| Process Connection / Stem | 1/2-20 UNF / 153 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–100 bar (nominal 1500 psi class) / <±0.5% FS |
| Brand | Gefran |
| Ordering Requirement | Verify F040926, the 100 bar range, full 2130X000X00 suffix, S diaphragm, process thread and controller alarm settings |
| Supply Ability | 2 Units per Month |
| Product Type | KE1-6-M-B01C-1-4-D-S 2130X000X00 / F040926 |
| Electrical Output / Interface | 2-Wire 4–20 mA / 10–30 VDC / 6-Pin Connector |
| Payment Terms | T/T |
| Series / Control Platform | KE Series / Sodium-Potassium (NaK) |
| Delivery Time | 7-14 Days |
| Model | KE1-6-M-B01C-1-4-D-S 2130X000X00 |
| Model Number | KE1-6-M-B01C-1-4-D-S 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran ME1-6-M-B05C-1-4-D Melt Pressure Transmitter 500 Bar
Gefran ME1-6-M-P05M-1-4-D Melt Pressure Transmitter 5000 PSI
Gefran KE1-6-M-P10M-1-4-D-S NaK Melt Pressure Transmitter
Gefran KE1-6-M-P05M-1-4-D-S NaK Melt Pressure Transmitter
Product Specification
| Packaging Details | original packing | Process Connection / Stem | 1/2-20 UNF / 153 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–100 bar (nominal 1500 psi class) / <±0.5% FS | Brand | Gefran |
| Ordering Requirement | Verify F040926, the 100 bar range, full 2130X000X00 suffix, S diaphragm, process thread and controller alarm settings | Supply Ability | 2 Units per Month |
| Product Type | KE1-6-M-B01C-1-4-D-S 2130X000X00 / F040926 | Electrical Output / Interface | 2-Wire 4–20 mA / 10–30 VDC / 6-Pin Connector |
| Payment Terms | T/T | Series / Control Platform | KE Series / Sodium-Potassium (NaK) |
| Delivery Time | 7-14 Days | Model | KE1-6-M-B01C-1-4-D-S 2130X000X00 |
| Model Number | KE1-6-M-B01C-1-4-D-S 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
Gefran KE1-6-M-B01C-1-4-D-S 2130X000X00, Gefran code F040926, is the 100 bar member of this KE1 NaK-filled 4–20 mA transmitter group. Its lower full-scale range is intended for melt processes where normal operating pressure is substantially below the levels associated with 350, 500 or 700 bar transmitters. Selecting a range closer to the actual process window can improve the useful resolution of the controller input, but only when adequate allowance remains for startup and transient pressure.
This model should not be chosen solely to obtain greater display resolution. Review recorded startup peaks, screen-pack loading, cold-material conditions and the machine’s shutdown thresholds before specifying a 100 bar span. The transmitter must not be used as a substitute for mechanical overpressure protection. PLC scaling, high-pressure alarms and recorder ranges must all be changed when migrating from a higher-range model.
| Complete Identification | KE1-6-M-B01C-1-4-D-S 2130X000X00 |
| Gefran Code | F040926 |
| Pressure Span | 0–100 bar; nominal 1500 psi class |
| Accuracy Class | M, less than ±0.5% FS |
| Pressure-Transfer Medium | NaK |
| Output | Two-wire 4–20 mA |
| Power Requirement | 10–30 VDC |
| Electrical Interface | 6-pin connector |
| Process Thread | 1/2-20 UNF |
| Mechanical Length Codes | 153 mm rigid stem and 457 mm flexible capillary |
| Specified Diaphragm | S option, 15-5 PH stainless steel with GTP+ coating |
| Maximum Diaphragm Temperature | 400°C for the S option |
Install only after the line has been cooled and depressurized. Check that the mounting bore, thread and diaphragm seat correspond to the existing installation. Protect the diaphragm from impact and hardened polymer, maintain a gradual bend radius in the flexible capillary and keep the electronics away from direct heater radiation. Confirm the correct mating connector, wiring diagram, loop polarity and 100 bar controller scaling before startup.
KE1-6-M-B35D-1-4-D-S 2130X000X00 (F034502) increases the span to 350 bar. KE1-6-M-B05C-1-4-D-S 2130X000X00 (F046485) is rated for 500 bar. KE1-6-M-P05M-1-4-D-S 2130X000X00 (F049682) uses a 5000 psi order code, while KE1-6-M-P10M-1-4-D-S 2130X000X00 (F036156) is the 10000 psi version. These differences require corresponding changes to control scaling and alarm limits. Related models are provided for family reference only and are not automatically interchangeable.
Provide a clear nameplate photograph when replacing an installed sensor. Confirm F040926, every model character, the 2130X000X00 code, diaphragm suffix, pressure unit, connector, cable requirement and mechanical lengths before ordering.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!