Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | original packing |
| Process Connection / Installation | 1/2-20 UNF, 6-Pin Connector, 6-Inch Rigid Stem with 18-Inch Flexible Section |
| Pressure Range | 0 to 700 bar |
| Brand | Gefran |
| Ordering Requirement | Verify F007714, 700 bar controller scaling, loop wiring, stem lengths and full nameplate |
| Supply Ability | 2 Units per Month |
| Product Type | High-Range Melt Pressure Transmitter |
| Output / Accuracy Class | 4–20 mA / 0.5% FSO |
| Payment Terms | T/T |
| Series / Control Platform | ME1 Series / Mercury Filled |
| Delivery Time | 7-14 Days |
| Model | ME1-6-M-B07C-1-4-D 2130X000X00 |
| Model Number | ME1-6-M-B07C-1-4-D 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran ME1-6-M-B05C-1-4-D Melt Pressure Transmitter 500 Bar
Gefran ME1-6-M-P05M-1-4-D Melt Pressure Transmitter 5000 PSI
Gefran KE1-6-M-P10M-1-4-D-S NaK Melt Pressure Transmitter
Gefran KE1-6-M-P05M-1-4-D-S NaK Melt Pressure Transmitter
Product Specification
| Packaging Details | original packing | Process Connection / Installation | 1/2-20 UNF, 6-Pin Connector, 6-Inch Rigid Stem with 18-Inch Flexible Section |
| Pressure Range | 0 to 700 bar | Brand | Gefran |
| Ordering Requirement | Verify F007714, 700 bar controller scaling, loop wiring, stem lengths and full nameplate | Supply Ability | 2 Units per Month |
| Product Type | High-Range Melt Pressure Transmitter | Output / Accuracy Class | 4–20 mA / 0.5% FSO |
| Payment Terms | T/T | Series / Control Platform | ME1 Series / Mercury Filled |
| Delivery Time | 7-14 Days | Model | ME1-6-M-B07C-1-4-D 2130X000X00 |
| Model Number | ME1-6-M-B07C-1-4-D 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran ME1-6-M-B07C-1-4-D 2130X000X00, ordering code F007714, is a high-range melt pressure transmitter calibrated from 0 to 700 bar. It is intended for pressure monitoring in extrusion systems where the expected operating and protective limits exceed the capacity of common 350 or 500 bar transmitters. The transmitter supplies a two-wire 4–20 mA signal and requires a compatible 10–30 VDC current loop.
| Complete Model | ME1-6-M-B07C-1-4-D 2130X000X00 |
| Ordering Code | F007714 |
| Pressure Range | 0 to 700 bar |
| Output Signal | 4–20 mA |
| Supply Voltage | 10–30 VDC |
| Accuracy | Less than ±0.5% FSO |
| Response Time | Approximately 1 ms |
| Process Connection | 1/2-20 UNF |
| Stem Configuration | 153 mm rigid plus 457 mm flexible |
| Protection | IP65 with the correct mating connector |
This model can serve high-pressure melt locations such as melt-pump discharge, restrictive filtration sections and extrusion dies, provided that the machine design permits a 700 bar measuring range. The control system should interpret 4 mA as zero and 20 mA as 700 bar. Using an incorrectly configured analog scale can conceal an overpressure condition or cause nuisance shutdowns.
Before removing the installed transmitter, record the engineering units, full-scale setting, alarm thresholds and shutdown logic. Seven hundred bar is approximately 10,153 psi and is therefore not the same calibration as a 10,000 psi P10M model. Inspect the pressure port for contamination and confirm that the sensing diaphragm will not contact the bottom of the mounting hole. Maintain the flexible section above its minimum safe bend radius and protect the connector from moisture and polymer residue.
ME1-6-M-P10M-1-4-D F007744 is calibrated to exactly 10,000 psi rather than 700 bar. ME1-6-M-B05C-1-4-D F007704 is the lower 500 bar version. ME2-6-M-B07C-1-5-D F007779 adds a type J thermocouple and uses a longer rigid-stem code. ME1-6-H-B07C-1-4-D F044832 changes the accuracy class from M to H. Related models are provided for family reference only and are not automatically interchangeable.
State F007714 and the complete 2130X000X00 model when requesting supply. Confirm the 700 bar calibration, six-pin connector, 4–20 mA output, process thread, mechanical lengths and nameplate condition. Suggested pricing does not establish current inventory or delivery time.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!