Digital Signal Dsp Digital Signal Processor High Speed DsPIC33EP256MC204-I/PT

Product Specification

DSP DSC 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM  Op Amps and Advanced Analog  dsPIC33EP256MC204-I/PT

 Operating Conditions
 • 3.0V to 3.6V, -40°C to +85°C, DC to 70 MIPS
 • 3.0V to 3.6V, -40°C to +125°C, DC to 60 MIPS
 • 3.0V to 3.6V, -40°C to +150°C, DC to 40 MIPS
 Core: 16-Bit dsPIC33E/PIC24E CPU
 • Code Efficient (C and Assembly) Architecture
 • Two 40-Bit Wide Accumulators
 • Single Cycle (MAC/MPY) with Dual Data Fetch
 • Single-Cycle, Mixed-Sign MUL plus Hardware Divide
 • 32-Bit Multiply Support
 Clock Management
 • 1.0% Internal Oscillator
 • Programmable PLLs and Oscillator Clock Sources
 • Fail-Safe Clock Monitor (FSCM)
 • Independent Watchdog Timer (WDT)
 • Fast Wake-up and Start-up
 Power Management
 • Low-Power Management modes (Sleep, Idle, Doze)
 • Integrated Power-on Reset and Brown-out Reset
 • 0.6 mA/MHz Dynamic Current (typical)
 • 30 µA IPD Current (typical)
 High-Speed PWM
 • Up to Three PWM Pairs with Independent Timing
 • Dead Time for Rising and Falling Edges 
• 7.14 ns PWM Resolution
 • PWM Support for:- DC/DC, AC/DC, Inverters, PFC, Lighting- BLDC, PMSM, ACIM, SRM
 • Programmable Fault Inputs
 • Flexible Trigger Configurations for ADC Conversions
 Advanced Analog Features
 • ADC module:- Configurable as 10-bit, 1.1 Msps with four S&H or 
12-bit, 500 ksps with one S&H- Six analog inputs on 28-pin devices and up to 
16 analog inputs on 64-pin devices
 • Flexible and Independent ADC Trigger Sources
 • Up to Three Op Amp/Comparators with 
Direct Connection to the ADC module:- Additional dedicated comparator- Programmable references with 32 voltage points
 • Charge Time Measurement Unit (CTMU):- Supports mTouch® capacitive touch sensing- Provides high-resolution time measurement (1 ns)- On-chip temperature measurement
 Timers/Output Compare/Input Capture
 • 12 General Purpose Timers:- Five 16-bit and up to two 32-bit timers/counters- Four Output Compare (OC) modules, configurable 
as timers/counters- PTG module with two configurable timers/counters- 32-bit Quadrature Encoder Interface (QEI) module, 
configurable as a timer/counter
 • Four Input Capture (IC) modules
 • Peripheral Pin Select (PPS) to allow Function Remap
 • Peripheral Trigger Generator (PTG) for Scheduling 
Complex Sequences 
Communication Interfaces
 • Two UART modules (17.5 Mbps):- With support for LIN/J2602 protocols and IrDA®
 • Two Four-Wire SPI modules (15 Mbps)
 • ECAN™ module (1 Mbaud) CAN 2.0B Support
 • Two I2C modules (up to 1 Mbaud) with SMBus Support
 • PPS to allow Function Remap
 • Programmable Cyclic Redundancy Check (CRC)
 Direct Memory Access (DMA)
 • 4-Channel DMA with User-Selectable Priority Arbitration
 • UART, SPI, ADC, ECAN, IC, OC and Timers
 Input/Output
 • Sink/Source 12 mA or 6 mA, Pin-Specific for 
Standard VOH/VOL, Up to 22 or 14 mA, respectively 
for Non-Standard VOH1
 • 5V Tolerant Pins
 • Peripheral Pin Select (PPS) to allow Digital Function 
Remapping
 • Selectable Open-Drain, Pull-ups and Pull-Downs
 • Up to 5 mA Overvoltage Clamp Current
 • Change Notification Interrupts on All I/O Pins
 Qualification and Class B Support 
• AEC-Q100 REVG (Grade 1, -40°C to +125°C)
 • AEC-Q100 REVG (Grade 0, -40°C to +150°C)
 • Class B Safety Library, IEC 60730
 Debugger Development Support
 • In-Circuit and In-Application Programming
 • Two Program and Two Complex Data Breakpoints
 • IEEE 1149.2 Compatible (JTAG) Boundary Scan
 • Trace and Run-Time Watch

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.