DSP DSC 16-bit Digital Signal Controllers 256KB Flash And 30KB SRAM With

Product Specification

DSP DSC 16-bit Digital Signal Controllers 256KB Flash and 30KB SRAM with Advanced Analog processors DSPIC33FJ256GP710A-I/PF

Operating Conditions
 • 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
 • 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
 Core: 16-bit dsPIC33F CPU
 • Code-efficient (C and Assembly) architecture
 • Two 40-bit wide accumulators
 • Single-cycle (MAC/MPY) with dual data fetch
 • Single-cycle mixed-sign MUL plus hardware 
divide
 Clock Management
 • ±2% internal oscillator
 • Programmable PLLs and oscillator clock sources
 • Fail-Safe Clock Monitor (FSCM)
 • Independent Watchdog Timer (WDT)
 • Fast wake-up and start-up
 Power Management
 • Low-power management modes (Sleep, Idle, 
Doze)
 • Integrated Power-on Reset and Brown-out Reset
 • 2.1 mA/MHz dynamic current (typical)
 • 50 μA IPD current (typical)
 Advanced Analog Features
 • Two ADC modules:- Configurable as 10-bit, 1.1 Msps with four 
S&H or 12-bit, 500 ksps with one S&H- 18 analog inputs on 64-pin devices and up to 
32 analog inputs on 100-pin devices
 • Flexible and independent ADC trigger sources
 Timers/Output Compare/Input Capture
 • Up to nine 16-bit timers/counters. Can pair up to 
make four 32-bit timers.
 • Eight Output Compare modules configurable as 
timers/counters
 • Eight Input Capture modules
 Communication Interfaces
 • Two UART modules (10 Mbps)- With support for LIN 2.0 protocols and IrDA®
 • Two 4-wire SPI modules (15 Mbps)
 • Up to two I2C™ modules (up to 1 Mbaud) with 
SMBus support
 • Up to two Enhanced CAN (ECAN) modules 
(1 Mbaud) with 2.0B support
 • Data Converter Interface (DCI) module with I2S 
codec support
 Input/Output
 • Sink/Source up to 10 mA (pin specific) for stan
dard VOH/VOL, up to 16 mA (pin specific) for 
non-standard VOH1
 • 5V-tolerant pins
 • Selectable open drain, pull-ups, and pull-downs
 • Up to 5 mA overvoltage clamp current
 • External interrupts on all I/O pins
 Qualification and Class B Support
 • AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
 • AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
 • Class B Safety Library, IEC 60730
 Debugger Development Support
 • In-circuit and in-application programming
 • Two program and two complex data breakpoints
 • IEEE 1149.2-compatible (JTAG) boundary scan
 • Trace and run-time watch

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.