32KB Flash DSP IC Chip Analog 2KB SRAM DSPIC33FJ32MC204-I/PT

Product Specification

DSP DSC 16bit Digital Signal Controllers 32KB Flash And 2KB SRAM With Motor Control And Advanced Analog DSPIC33FJ32MC204-I/PT

 Operating Conditions
 • 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
 • 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
 Core: 16-bit dsPIC33F CPU
 • Code-efficient (C and Assembly) architecture
 • Two 40-bit wide accumulators
 • Single-cycle (MAC/MPY) with dual data fetch
 • Single-cycle mixed-sign MUL plus hardware divide
 Clock Management
 • 2% internal oscillator
 • Programmable PLLs and oscillator clock sources
 • Fail-Safe Clock Monitor (FSCM)
 • Independent Watchdog Timer (WDT)
 • Fast wake-up and start-up
 Power Management
 • Low-power management modes (Sleep, Idle, Doze)
 • Integrated Power-on Reset and Brown-out Reset
 • 1.35 mA/MHz dynamic current (typical)
 • 55 μA IPD current (typical)
 High-Speed PWM
 • Up to four PWM pairs with independent timing
 • Dead time for rising and falling edges
 • 12.5 ns PWM resolution
 • PWM support for:- DC/DC, AC/DC, Inverters, PFC, Lighting- BLDC, PMSM, ACIM, SRM
 • Programmable Fault inputs
 • Flexible trigger configurations for ADC conversions
 Advanced Analog Features
 • ADC module:- Configurable as 10-bit, 1.1 Msps with four 
S&H or 12-bit, 500 ksps with one S&H
 • Six analog inputs on 28-pin devices and up to 
nine analog inputs on 44-pin devices
 • Flexible and independent ADC trigger sources
 Timers/Output Compare/Input Capture
 • Three 16-bit timers/counters. Can pair up two to 
make one 32-bit.
 • Two Output Capture modules configurable as 
timers/counters
 • Four Input Capture modules
 • Peripheral Pin Select (PPS) to allow function 
remap
 Communication Interfaces
 • One UART module (10 Mbps)
 • With support for LIN 2.0 protocols and IrDA®
 • One 4-wire SPI module (15 Mbps)
 • One I2C™ module (up to 1 Mbaud) with SMBus 
support
 • PPS to allow function remap
 Input/Output
 • Sink/Source up to 10 mA (pin specific) for stan
dard VOH/VOL, up to 16 mA (pin specific) for 
non-standard VOH1
 • 5V-tolerant pins
 • Selectable open drain, pull-ups, and pull-downs
 • Up to 5 mA overvoltage clamp current
 • External interrupts on all I/O pins
 Qualification and Class B Support
 • AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
 • Class B Safety Library, IEC 60730
 Debugger Development Support
 • In-circuit and in-application programming
 • Two program and two complex data breakpoints
 • IEEE 1149.2-compatible (JTAG) boundary scan
 • Trace and run-time watch

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.