Pego Electronics (Yi Chun) Company Limited
| Flange diameter | Ø180mm and Ø260mm |
| Standard | IEC60851-3 |
| Power supply | 220V/50hz |
| Packaging Details | wooden case |
| Supply Ability | 100sets/month |
| Payment Terms | T/T |
| Bending arm length | 300mm and 400mm |
| Bending arm rotation angle | >180° |
| Delivery Time | 20 working days |
| Model Number | PG-MWT |
| Brand Name | Pego |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60851-3 Enamelled Round Wire Jerk Test Apparatus Max Operating Pressure 0
Springiness Speed 7r/min Winding Wires Springiness Test Apparatus Following
IEC60851-3 Enamelled Round Wire Peer Test Apparatus Input power AC 220V±10% 50Hz
IEC60851-3 Enamelled Round Wire Abrasion Resistance Test Apparatus
Product Specification
| Flange diameter | Ø180mm and Ø260mm | Standard | IEC60851-3 |
| Power supply | 220V/50hz | Packaging Details | wooden case |
| Supply Ability | 100sets/month | Payment Terms | T/T |
| Bending arm length | 300mm and 400mm | Bending arm rotation angle | >180° |
| Delivery Time | 20 working days | Model Number | PG-MWT |
| Brand Name | Pego | Certification | Third-Lab Calibration Certificate |
| Place of Origin | China | ||
| High Light | IEC60851-3 Rectangular Wire Winding Apparatus ，Rectangular Wire Mandrel Winding Test Apparatus | ||
Rectangular Wire Mandrel Winding Test Apparatus
1. Introduction
The rectangular wire mandrel winding test apparatus is designed according to IEC60851-3 clause 6.2.2 figure 4 and GB/T4074.3 clause 6.2.2 figure 4. It’s suitable for winding testing of various rectangular wires with a nominal conductor diameter of 1.60mm or less—including enameled rectangular wire, paper-insulated rectangular wire, glass-fiber-insulated rectangular wire, and film-wrapped wire—as well as corresponding copper and aluminum rectangular wires.
A straight piece of wire approximately 400mm in length shall be bent through 180° round a polished mandrel of the diameter given in the relevant standard in two directions to form an elongated S-shape. The straight part between the U-shape bends shall be at least 150mm. Care should be taken to ensure that the specimen does not buckle or depart from a uniform bend.
2. Specification
|
Winding Host |
1st host for flatwise winding (on the thickness) |
2nd host for edgewise winding (on the width) |
|
Flange diameter |
Ø180mm |
Ø260mm |
|
Bending arm length |
300mm |
400mm |
|
Bending arm rotation angle |
>180° |
|
|
Test rod |
Stepped rods: 3pcs (comprising 36 distinct circular diameters ringing from Ø4-Ø60mm, Mandrel (standard diameters): 62pcs, Ø4-Ø80mm |
|
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!