Pego Electronics (Yi Chun) Company Limited
| Jerk speed | ≥3m/s |
| Standard | IEC60851-3 |
| Packaging Details | wooden case |
| Max. Travel of movable fixture | 125mm |
| Supply Ability | 100sets/month |
| Payment Terms | T/T |
| Power supply | 220V/50Hz |
| Delivery Time | 20 working days |
| Initial distance between two clamps | (250±1)mm |
| Max. Operating pressure | 0.8Mpa |
| Model Number | PG-JTA |
| Brand Name | Pego |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60851-3 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length
Springiness Speed 7r/min Winding Wires Springiness Test Apparatus Following
IEC60851-3 Enamelled Round Wire Peer Test Apparatus Input power AC 220V±10% 50Hz
IEC60851-3 Enamelled Round Wire Abrasion Resistance Test Apparatus
Product Specification
| Jerk speed | ≥3m/s | Standard | IEC60851-3 |
| Packaging Details | wooden case | Max. Travel of movable fixture | 125mm |
| Supply Ability | 100sets/month | Payment Terms | T/T |
| Power supply | 220V/50Hz | Delivery Time | 20 working days |
| Initial distance between two clamps | (250±1)mm | Max. Operating pressure | 0.8Mpa |
| Model Number | PG-JTA | Brand Name | Pego |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | IEC60851-3 Jerk Test Apparatus ，Enamelled Jerk Test Apparatus | ||
IEC60851-3 Enamelled Round Wire Jerk Test Apparatus
1. Introduction
The enamelled round wire jerk test apparatus is designed according to IEC60851-3 clause 6.4 figure 5 and GB/T4074.3 clause 6.4 figure 5. It’s used to test the film adhesion properties of enameled round wires with a nominal conductor diameter up to and including 1.000 mm.
A straight piece of wire shall be rapidly stretched to the breaking point with test equipment as shown in figure 5. A free measuring length of between 200mm and 250mm shall be provided. After stretching, the specimen shall be examined for cracks or loss of adhesion under a magnification as given in Table 2. A distance of 2mm from the broken ends shall be disregarded.
2. Specification
|
Jerk speed |
≥3m/s |
|
Initial distance between two clamps |
(250±1)mm |
|
Max. Operating pressure |
0.8Mpa |
|
Max. Travel of movable fixture |
125mm |
|
Power consumption |
<150W |
|
Operating environment |
Temperature: 0-40℃, relative humidity: ≤85% |
|
Dimension and weight |
L660*W360*418mm/55KG |
|
Configure |
Equip with an external air compressor |
3. Picture
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!